Vortex FURY HD 5000 Bedienungsanleitung
2
Ocular Lens
Center Focus
Twist-up Eyecup
Strap
Attachment
Reticle Focus Diopter Focus
Measure Button
Menu Button
Tripod Adapter Socket
Objective Lens
Images are for representation only. Product may vary slightly from what is shown.
2 3
FURY®HD 5000 LASER RANGEFINDER BINOCULAR
The Fury®HD 5000 is an extremely effective angle-
compensated laser rangefinder binocular intended for
hunters, archers and shooters. The primary HCD (Horizontal
Component Distance) mode provides key angle compensated
range information required by the vast majority of rifle and
bow shooters in a simple, quick-to-read display.
The Fury®HD 5000 also has a LOS (Line of Sight) mode
and Scan feature, along with adjustments for reading in
yards or meters and setting the brightness of the display.
4
BASIC OPERATION
Adjust the eyecups
The eyecups on a Fury®HD 5000
twist up and down so any viewer
can see the full field and enjoy
comfortable viewing—with or
without eyeglasses.
When not using eyeglasses or
sunglasses, keep the eyecups
fully extended. For best viewing
when wearing eyeglasses, twist
eyecups down.
Adjust the interpupillary distance
The interpupillary distance (IPD) is the distance between
the centers of the left and right eye pupils. Match the IPD
of your eyes to that of the binocular so you see a single
image free of shading. Rotate the binocular barrels inward
or outward to line your eyes up with ocular lenses.
4 5
Properly focus the binocular
For the best views, follow this two-step
process to properly adjust the center
focus and diopter. Choose an object
that is about 20 yards away from you
and stay in the same spot until you have
adjusted the binocular for your eyes.
1. Adjust the center focus—start by
closing your left eye or covering the
left objective lens with your hand.
Focus your right eye on the object
and adjust the center focus wheel
until the image is in focus. Leave
the center focus in this position as
you adjust the diopter.
2. Adjust the diopter—start by closing
your right eye or covering the right
objective lens with your hand. Look
through your left eye, adjust the
diopter so that the object is in focus.
Make note of this diopter setting in
case you need to set it again. From
this point on, you will only need to
use the center focus wheel.
Adjust Diopter Setting
6
Install Battery
Open the battery compartment and
install the CR2 battery included with
the Fury® HD 5000.
Install battery with positive side
facing in.
Power Up
To power up the Fury and prepare for ranging, press and
release the Measure button. The HCD or LOS ranging
screen will display. The Fury will power down automatically
after ten seconds of non-use.
Low Battery Icon
The low battery icon comes on at 25%
and stays on until there is no power.
Properly focus the rangefinder display
This process is similar to focusing the binocular.
1. Power up the binocular and close your left eye.
2. View the rangefinder display with your right eye.
3. Use the reticle focus adjustment ring to bring the
display into sharp focus.
Once this is done you will not have to refocus the rangefinder
display again.
+
–
6 7
MODE SELECTION
Your Fury® HD 5000 is factory set to the angle
compensating HCD ranging mode, best target mode, yards,
and maximum brightness. For most users, these are the
preferred settings.
To change modes: Press and release the Measure button
to power on and then press and hold the Menu button for
at least four seconds. Once the Mode Selection screen
displays, release the button.
As you progress through Mode Selection, you may exit at
any time and save your settings by pressing and holding the
Menu button for at least four seconds—the Fury will return
to power-up condition.
Mode Selection Display
Menu
Button
Measure
Button
8
SET AND SAVE MODE SELECTIONS
Ranging Mode Selection
Choose between the HCD and LOS Modes.
After activating the Mode Selection, press the Measure
button to toggle between the HCD and LOS displays. Press
the Menu button to save your desired choice and move to
the Yards/Meters selection screen.
Display Selection
Choose between Yards and Meters Display.
Press the Measure button to toggle between the Yards and
Meters display. Press the Menu button to save your desired
choice and move to the Brightness selection screen.
8 9
Brightness Selection
Choose between Five Brightness Settings.
The Fury® HD 5000 provides five
illumination settings. Press the Measure
button to toggle through the five
Brightness settings. Press the Menu
button to save your desired setting and
move back to the target mode selection.
Target Mode Selection
Target Mode Explanations
The Fury HD 5000 provides two target modes: Best Mode
and Last Mode.
Best Mode
Your Fury HD 5000 comes preset to Best target mode. This
is the standard mode providing the range of the target with
the strongest range result. Best Mode is the recommended
target mode for most situations.
Last Mode
Displays the farthest distance when panning and scanning.
This mode is ideal for ranging a specific target behind a
group of objects like brush, trees, rocks, etc.
10
No Range
Returned
Setting Target Modes
Press the Measure button to toggle between the Best and
Last displays. Press the Menu button to save your desired
choice and move back to the HCD/LOS selection screen.
To exit Mode Selection and save settings, press and hold
the Menu button for four seconds. Settings will also save
when Fury powers down automatically.
RANGING
With the Fury® HD 5000 powered up,
position the reticle on the target object
and press and release the Measure
button to get the distance measurement.
If the laser is not able to range due to
the reflectivity of the target, you will see
a display similar to that shown here. To
range a new target, simply re-aim and
press the Measure button again.
Andere Handbücher für FURY HD 5000
2
Inhaltsverzeichnis
Andere Vortex Fernglas Handbücher
Vortex
Vortex Razor 10x50 Bedienungsanleitung
Vortex
Vortex FURY HD 5000 Bedienungsanleitung
Vortex
Vortex Vanquish Bedienungsanleitung
Vortex
Vortex DB-205 Bedienungsanleitung
Vortex
Vortex VANQUISH VNQ-1026 Bedienungsanleitung
Vortex
Vortex FURY HD 5000 Bedienungsanleitung
Vortex
Vortex Razor 8.5x50 Bedienungsanleitung
Vortex
Vortex VIPER HD Bedienungsanleitung
Vortex
Vortex Viper HD R/T Bedienungsanleitung
Vortex
Vortex TRIUMPH HD Bedienungsanleitung
Vortex
Vortex Raptor Bedienungsanleitung
Vortex
Vortex Viper 8x28 R/T Bedienungsanleitung
Vortex
Vortex FURY HD 5000 AB Bedienungsanleitung
Vortex
Vortex Viper Series Bedienungsanleitung
Vortex
Vortex Diamondback HD Bedienungsanleitung
Vortex
Vortex Viper Bedienungsanleitung
Vortex
Vortex BIN-DBK-12A Montageanleitung
Vortex
Vortex FURY Bedienungsanleitung
Vortex
Vortex FURY HD 5000 AB Bedienungsanleitung
Vortex
Vortex Kaibab HD Bedienungsanleitung
