Vortex Diamondback HD 2000 Bedienungsanleitung

PRODUCT MANUAL

DIAMONDBACK™HD 2000

2 3

DIAMONDBACK™HD 2000

LASER RANGEFINDER

The Diamondback™HD 2000 is an essential companion

for the everyday hunter, archer, and shooter. This angle

compensated rangeﬁnder features two target modes,

Normal and Last, and two range modes, Horizontal

Component Distance (HCD) and Line of Sight (LOS) Mode,

for any ranging environment.

Images are for representation only.

Product may vary slightly from what is shown.

Speciﬁcations

MAGNIFICATION 7x

OBJECTIVE LENS 24mm

MAX REFLECTIVE RANGE Up to 2000 yds. (1829m)

TREE RANGE Up to 1800 yds. (1646m)

DEER RANGE Up to 1400 yds. (1189m)

MINIMUM RANGE 5 yds. (4.5m)

ACCURACY

± 1 yd. @ ≤100 yds.

± 2 yds. @ ≥100 yds. & ≤500 yds.

± 3 yds. @ ≥500 yds.

MAXIMUM ANGLE READING ± 60°

FIELD OF VIEW Linear @ 1000 yds. 335'

Angular 6.4°

EYE RELIEF 16mm

BATTERY TYPE CR2

BATTERY LIFE 2000 + Range Cycles at Brightness Level 3

LENGTH 4.1" (103.4mm)

HEIGHT 3.1" (79.5mm)

WIDTH 1.8" (45mm)

WEIGHT W/ BATTERY 7.6 oz. (215.5g)

DIAMONDBACK™HD 2000

2 3

DIAMONDBACK™HD 2000

LASER RANGEFINDER

The Diamondback™HD 2000 is an essential companion

for the everyday hunter, archer, and shooter. This angle

compensated rangeﬁnder features two target modes,

Normal and Last, and two range modes, Horizontal

Component Distance (HCD) and Line of Sight (LOS) Mode,

for any ranging environment.

Images are for representation only.

Product may vary slightly from what is shown.

Speciﬁcations

MAGNIFICATION 7x

OBJECTIVE LENS 24mm

MAX REFLECTIVE RANGE Up to 2000 yds. (1829m)

TREE RANGE Up to 1800 yds. (1646m)

DEER RANGE Up to 1400 yds. (1189m)

MINIMUM RANGE 5 yds. (4.5m)

ACCURACY

± 1 yd. @ ≤100 yds.

± 2 yds. @ ≥100 yds. & ≤500 yds.

± 3 yds. @ ≥500 yds.

MAXIMUM ANGLE READING ± 60°

FIELD OF VIEW Linear @ 1000 yds. 335'

Angular 6.4°

EYE RELIEF 16mm

BATTERY TYPE CR2

BATTERY LIFE 2000 + Range Cycles at Brightness Level 3

LENGTH 4.1" (103.4mm)

HEIGHT 3.1" (79.5mm)

WIDTH 1.8" (45mm)

WEIGHT W/ BATTERY 7.6 oz. (215.5g)

DIAMONDBACK™HD 2000

4 5

Ocular Lens

Battery

Compartment

Wrist Lanyard

Attachment Socket

Diopter Focus

Measure Button

Utility Clip

Menu Button

Tripod

Adapter Socket

Objective Lens

BASIC OPERATION

Battery Installation and Replacement

To insert a new battery,

ﬂip up the ﬁnger tab on

the Battery Cap located on

the bottom of the unit and

unscrew, counterclockwise,

to remove. Insert CR2 battery

with the positive side (+)

facing outwards. Reinstall

Battery Cap and ensure it is

tightly closed.

Power Up

Once the battery is installed, the Diamondback™HD 2000

is in ready condition – the normal, power-off condition

when not ranging. To power up the Diamondback™

HD 2000 from ready condition, press and release the

“Measure” button. The HCD or LOS ranging screen will

display. The Diamondback™HD 2000 will power down

automatically after 20 seconds of non-use.

Battery Cap

DIAMONDBACK™HD 2000

4 5

Ocular Lens

Battery

Compartment

Wrist Lanyard

Attachment Socket

Diopter Focus

Measure Button

Utility Clip

Menu Button

Tripod

Adapter Socket

Objective Lens

BASIC OPERATION

Battery Installation and Replacement

To insert a new battery,

ﬂip up the ﬁnger tab on

the Battery Cap located on

the bottom of the unit and

unscrew, counterclockwise,

to remove. Insert CR2 battery

with the positive side (+)

facing outwards. Reinstall

Battery Cap and ensure it is

tightly closed.

Power Up

Once the battery is installed, the Diamondback™HD 2000

is in ready condition – the normal, power-off condition

when not ranging. To power up the Diamondback™

HD 2000 from ready condition, press and release the

“Measure” button. The HCD or LOS ranging screen will

display. The Diamondback™HD 2000 will power down

automatically after 20 seconds of non-use.

Battery Cap

DIAMONDBACK™HD 2000

6 7

Low Battery Icon

The Low Battery Icon comes on at

25% and stays on until there is no

power or the battery is replaced.

Adjusting the Diopter

Rotate the Diopter clockwise or counterclockwise until the

image is in focus. This may have to be adjusted slightly

when viewing at different distances.

Low Battery

Attaching the

Wrist Lanyard

The Lanyard provides a secure

way to carry your rangeﬁnder.

Utility Clip

The Diamondback™HD 2000 comes with a Utility Clip

on the unit’s left-hand side. You can switch Utility Clip’s

side by unscrewing the 2mm hex screws on the left-hand

side, and the 2mm hex screws on the unit’s right-hand

side. Reinstall the Utility Clip on the unit’s right-hand

side and replace the plate and 2mm hex screws on the

left-hand side.

2mm Hex ScrewsUtility Clip

Loop the Lanyard through

the attachment socket.

DIAMONDBACK™HD 2000

6 7

Low Battery Icon

The Low Battery Icon comes on at

25% and stays on until there is no

power or the battery is replaced.

Adjusting the Diopter

Rotate the Diopter clockwise or counterclockwise until the

image is in focus. This may have to be adjusted slightly

when viewing at different distances.

Low Battery

Attaching the

Wrist Lanyard

The Lanyard provides a secure

way to carry your rangeﬁnder.

Utility Clip

The Diamondback™HD 2000 comes with a Utility Clip

on the unit’s left-hand side. You can switch Utility Clip’s

side by unscrewing the 2mm hex screws on the left-hand

side, and the 2mm hex screws on the unit’s right-hand

side. Reinstall the Utility Clip on the unit’s right-hand

side and replace the plate and 2mm hex screws on the

left-hand side.

2mm Hex ScrewsUtility Clip

Loop the Lanyard through

the attachment socket.

DIAMONDBACK™HD 2000

8 9

MODE SELECTIONS

Changing Modes on the Diamondback™HD 2000

The Diamondback™HD 2000 is factory set to the angle

compensating HCD range mode, Normal target mode,

yards, and brightness level 3.

To Change Modes

Press and release the

“Measure” button to

power the unit On.

To change modes,

press and hold the

“Menu” button until

the Mode Selection

screen appears

(about 2 seconds).

Scroll through the

mode options by

clicking the “Menu”

button. To adjust a mode, click the “Measure” button.

To save your settings and exit the Mode Selection screen,

press and hold the “Menu” button for at least two seconds.

Use the “Menu”

button to activate

the Mode

Selection menu

and scroll through

mode options.

Use the “Measure”

button to adjust

the mode.

RANGING MODE SELECTION

Choose Between the HCD and LOS Modes

After activating the Range Mode Selection, press the

“Measure” button to toggle between the HCD and LOS

displays. Press the “Menu” button to save your desired

choice and continue through to the Range Selection screen.

Choose between HCD and LOS mode.

DIAMONDBACK™HD 2000

8 9

MODE SELECTIONS

Changing Modes on the Diamondback™HD 2000

The Diamondback™HD 2000 is factory set to the angle

compensating HCD range mode, Normal target mode,

yards, and brightness level 3.

To Change Modes

Press and release the

“Measure” button to

power the unit On.

To change modes,

press and hold the

“Menu” button until

the Mode Selection

screen appears

(about 2 seconds).

Scroll through the

mode options by

clicking the “Menu”

button. To adjust a mode, click the “Measure” button.

To save your settings and exit the Mode Selection screen,

press and hold the “Menu” button for at least two seconds.

Use the “Menu”

button to activate

the Mode

Selection menu

and scroll through

mode options.

Use the “Measure”

button to adjust

the mode.

RANGING MODE SELECTION

Choose Between the HCD and LOS Modes

After activating the Range Mode Selection, press the

“Measure” button to toggle between the HCD and LOS

displays. Press the “Menu” button to save your desired

choice and continue through to the Range Selection screen.

Choose between HCD and LOS mode.

DIAMONDBACK™HD 2000

10 11

HCD Mode

The Horizontal Component Distance (HCD) display is

intended to be your primary mode, used for most riﬂe

and archery shooting applications. The yardage number

displayed is the critical HCD.

Horizontal Component

Distance: 385 Yards

500 Yard Line of Sight

The displayed HCD yardage is corrected for shot angle

and needs no extra user input; shooters simply use

the appropriate level ground bullet drop for the range

displayed. Archers use the appropriate level ground sight

pin for the range displayed.

Use the HCD range mode in the following situations:

• Riﬂe shooting on level ground at any range.

• Riﬂe shooting out to ranges of 800 yards with mild

slopes (less than 15 degrees).

• Riﬂe shooting out to ranges of 400 yards with moderate

slopes (15 to 30 degrees).

• For all archery shooting.

Note: To correctly account for wind, you need to know the Line of

Sight distance to the target as it is based on how far the bullet

travels to the target. This can be achieved using the LOS mode.

Inhaltsverzeichnis

Andere Vortex Messgerät Handbücher

Vortex

Vortex Crossfire HD 1400 Bedienungsanleitung

Vortex

Vortex Razor HD 4000 Bedienungsanleitung

Vortex

Vortex Ranger 1500 Bedienungsanleitung

Vortex

Vortex Ranger 1000 Bedienungsanleitung

Vortex

Vortex Viper HD 3000 Bedienungsanleitung

Vortex

Vortex RWG Series Bedienungsanleitung

Vortex

Vortex Impact 850 Bedienungsanleitung

Vortex

Vortex Viper HD 3000 Bedienungsanleitung

Vortex

Vortex RANGER 1300 Bedienungsanleitung

Vortex

Vortex Razor HD 4000 Bedienungsanleitung

Vortex

Vortex IMPACT 4000 Gebrauchsanweisung

Vortex

Vortex Impact 850 Bedienungsanleitung

Vortex

Vortex BLUEONE BWO 155ZM Bedienungsanleitung

Vortex

Vortex Razor HD 4000 GB Bedienungsanleitung

Vortex

Vortex Razor HD 4000 GB Gebrauchsanweisung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung