2 Trunk / Hood
3 Door
APSSECRS
Security and Remote Start
Please Visit
Remote Programming
3 Chirp 4 Chirp 5 Chirp 6 Chirp
1 Lock / Unlock Funcon 500ms 3.5sec
500ms L, DBL UL DBL L, 500ms UL DBL L, DBL UL 500ms L, 350ms UL
2 Ignion Lock OFF ON
3 Ignion Unlock OFF Unlock All Unlock Driver
4 Exterior Illuminaon OFF With Arm
With Disarm With Arm & Disarm
5 Auto Relock OFF Auto Lock Only Auto Lock & Arm
6 Auto Arming / Locking OFF Auto Arm Only
7 Nocaon Sound Both Siren Horn
8 Horn Timing 16ms 30ms
9 Valet Override Method Valet Custom Code
10 Driver Priority Unlock OFF ON
11 Silent Choice OFF From Transmier
12 Security Prole All On Doors oHood / trunk OAll OAll On w/ OEM RS
13 Door Trigger Input Negave Posive
14 Park Light / Trunk Swap OFF ON
15 Data Port Protocol ADS DBI
16 Dome Light Delay Timer OFF / Program 15sec
17 Alarm Trigger Legnth 30sec 45sec 60sec
3 Chirp 4 chirp 5 Chirp 6 Chirp
1 Defrost Output Pulsed 10min RS Runme
2 RS Start Nocaon ON OFF
3 RS Runme 15min 20min 45min 60min 5min 10min
4 RS Parking Lights Steady Flashing
5 Engine Conrmaon Tach Voltage
6 Voltage Level >0.5v B4 Start <0.5v B4 Start
7 Ignion 2 Output Ignion Accessory
8 Ignion 3 Output Ignion Accessory Start
9 Accessory Output Accessory Ignion
10 Transmission Auto Manual
11 Max Crank Time 0.8sec 1.0sec
1.5sec 2.0sec 3.0sec 4.0sec
12 Diesel Delay OFF Diesel 5 Diesel 10 Diesel 15 Diesel 20 Diesel 30
13 Temperature Start OFF 14F
14 Crank Duraon Averaging Preset
15 RS Shock Override Shunt unl Clear Shunt RS Cycle Shunt From TX
16 Turbo Timer OFF 3min
17 Start Acvaon Two Press One Press Three Press
18 RS Lock Funcon No Change UL Before L Aer
UL Before Start Lock Aer Start
19 Factory Disarm Output Single Pulse Double Pulse 350ms 500ms 800ms Same As Bank 2, F1
20 Addional Unlock Pulse No Pulse IGN, ACC, GWR
Headlight
Defrost
LED
Ch. 4 AUX
Ch. 5 AUX
Ch. 6 AUX
Ch. 7 AUX
2020 Voxx Electronics. All Rights Reserved.
Tach Programming
2 Remote Shutdown
3 Brake On
4 Manual Mode
5 Hood Open
6 Low / No Tach
7 Tach Programming
8 High Tach
The Feature Banks below can also be programmed using the FlashLogic Weblink or Weblink Mobile.
Alarm
Chirp Delete
Bank programming.
1.
2.
User Programmable LED
programming.
1.
2.
Programming:
1.
2.
and Trunk/Start.
from the main module.
1.
2.
3.
4.
5.
7.
1.
2.
3.
4.
5.
7.
seconds to indicate the tach rate is programmed.
Note:
v1.47 or Higher.
Remote Start
lights to indicate the cause.
REV. B
1.
2.
3.
Note:
Dome Delay Programming
alarm trigger.
1.
2.
Dome Delay Reset
