Walker WP11DTB Bedienungsanleitung

DIGITAL TERRESTRIAL RECEIVER

OPERATING INSTRUCTIONS

WP11DTB

BE WALKER WISE...logon to www.walker.ie

SAORVIEW Digital Receiver

CONTENTS

1. GENERAL PROPERTIES ...................................................................................................... 2

2. SAFETY PRECAUTIONS ....................................................................................................... 3

3. PREPARING .......................................................................................................................... 4

3.1. REMOTE CONTROL ........................................................................................................... 4

3.2. CONNECTIONS .................................................................................................................. 5

3.2.1. CONNECTION TO THE TV .............................................................................................. 5

3.2.2. PUTTING INTO OPERATION .......................................................................................... 6

3.2.3. SOCKETS ........................................................................................................................ 6

4. REMOTE CONTROL FUNCTIONS ........................................................................................ 7

4.1. REMOTE CONTROL LAYOUT ............................................................................................ 7

MENU INTERFACE .................................................................................................................... 9

FIRST TIME INSTALLATION ..................................................................................................... 9

MAIN MENU ............................................................................................................................. 10

5. CHANNEL LIST .................................................................................................................... 10

5.1. NAVIGATING THE WHOLE LIST OF CHANNELS ............................................................ 10

5.2. MOVING CHANNELS ........................................................................................................ 11

5.3. DELETING UNWANTED CHANNEL ................................................................................. 11

5.4. RENAMING CHANNELS ................................................................................................... 11

5.5. ADDING LOCKS TO CHANNELS ..................................................................................... 11

5.6. SETTING FAVOURITES ................................................................................................... 11

6. PROGRAMME GUIDE (7 DAYS EPG) ................................................................................. 12

7. TIMERS ................................................................................................................................ 12

8. SETUP ................................................................................................................................. 13

8.1. CONFIGURATION MENU ................................................................................................. 13

8.1.1. DIGITAL AUDIO OUTPUT .............................................................................................. 13

8.1.2. AUDIO DELAY................................................................................................................ 14

8.1.3. LOW POWER ................................................................................................................. 14

8.1.4. FAVOURITE MODE ....................................................................................................... 14

8.1.5. CHANNEL LIST .............................................................................................................. 14

8.1.6. ACTIVE ANTENNA ......................................................................................................... 14

8.1.7. RECEIVER UPGRADE - OAD ........................................................................................ 14

8.1.8. TV SETTINGS ................................................................................................................ 15

8.1.8.1. TV TYPE ...................................................................................................................... 15

8.1.8.2. DISPLAY FORMAT ..................................................................................................... 15

8.1.8.3. TV OUT ....................................................................................................................... 15

8.1.8.4. HDMI RESOLUTION ................................................................................................... 15

8.1.9. PARENTAL CONTROL .................................................................................................. 15

8.1.9.1. MATURITY LOCK ........................................................................................................ 15

8.1.9.2. MENU LOCK ............................................................................................................... 15

8.1.9.3. SET PIN ....................................................................................................................... 16

8.1.10. TIME SETTINGS .......................................................................................................... 16

8.2. LANGUAGE ....................................................................................................................... 16

8.3. INSTALLATION ................................................................................................................. 17

8.3.1. AUTOMATIC SEARCH ................................................................................................... 17

8.3.2. MANUAL SEARCH ......................................................................................................... 17

8.3.3. FIRST TIME INSTALLATION ......................................................................................... 17

9. MEDIA BROWSER ............................................................................................................... 18

10. SOFTWARE UPGRADE THROUGH USB ......................................................................... 20

11. MESSAGES ....................................................................................................................... 21

12. CHANNEL NAVIGATION ................................................................................................... 22

13. VOLUME CONTROL .......................................................................................................... 22

14. TROUBLESHOOTING GUIDE ........................................................................................... 23

15. TECHNICAL SPECIFICATIONS ......................................................................................... 24

1. GENERAL PROPERTIES

 DVB and VBI Teletext

 200 Channels

 English, German, French, Spanish, Portuguese,

Italian, Finnish, Swedish, Danish, Norwegian,

Slovak OSD.

 DVB 7 days event information (7 days EPG)

 TV scart (with RGB and CVBS support)

 HDMI output

 Format resolution: 1080i, 720p, 576p

 Last watched channel saving

 Automatic search for all channels

 Stand-by mode channels search support

(optional)

 5 timers can be used either for recording or as

a sleep timer

 Timer function (TV timer) programmable via

EPG

 5 Favourite list

 Parental lock options at different levels

 Channel lock (password protected)

 Menu/Installation lock (password

protected)

 Low power consumption (less than 1 W)

(Optional)

 RECEPTION :

 DVB-T Compliant

 Input frequency range: VHFIII; 174–

230 MHz, 8 MHz bandwith

UHFIV and UHFV; 470-862 MHz,

8MHz bandwith

 Input signal level: min: -79 dBm

max: -15 dBm

 Supports 16-, 64-QAM modulations

 Signal strength and quality bar for

antenna adjustment

 Manual and automatic search options

 VIDEO & OSD :

 Video: MP @ ML, PAL, 4:3/16:9

 MPEG-4 AVC/H.264 HP@L4

Video Decoder

 Screen Format: Letterbox 14:9,

Letterbox 16:9 and center cut out.

 8-bit OSD colour, 720x576 pixels

 Decoding & Video Out: PAL

 AUDIO:

 Audio: MPEG-1 layer I / II, MPEG-2

layer II, MPEG-2 AAC, MPEG-4 AAC

 Multi-format audio decoder

 Multi language audio support (up to

10)

 Audio mute and volume control

 SYSTEM RESOURCES

 ST40 32 bit superscalar RISC CPU @

266 MHz

 4 X 32 Mbyte (128 MB) RAM memory

 8 Mbyte Flash memory

2. SAFETY PRECAUTIONS

Power Source

 Always use the provided AC adapter.

 Operate only from the power source specified

on the AC adapter.

 During use of the AC adapter, the surface of it

gets hot. This is normal and not a failure.

 Do not cover the case of the AC adapter with

any material, while it is in operation. Leave 15

cm space (minimum) around the AC adapter.

 The rating information and safety caution of the

AC adapter are on it’s case.

Warning: When the set is not in use for a long time,

disconnect it from the mains supply.

Power Cord

Do not place the unit, a piece of furniture, etc., on

the power cord (mains lead), or pinch the cord.

Handle the power cord by the plug. Do not pull out

the plug by tugging the cord and never touch the

power cord when your hands are wet as this could

cause a short circuit or electric shock. Never make

a knot in the cord or tie it with other cords. The

power cords should be routed in such a way that

they are not likely to be stepped on. Check the

power cord once in a while. When you find it

damaged, ask closest service agent for help. When

the AC power cord needs to be changed, it should

be done at a qualified service shop only.

Choice of Location

• Please do not place the set in a place subject to

direct sun light, excessive dust or mechanical shock

or in a location near heat sources.

• The set should be placed on a solid and safe

base. Do not place the apparatus on a soft surface

such as a rug that might block the ventilation holes

on the bottom.

• A location should not be selected such as a room

with high humidity, as the condensation, arising in

the kitchen for example, may cause malfunction or

damage the set.

• Heating or other thermal radiation under the set

also may cause malfunction or damage the set.

• The hot air, which arises during the operation,

should be ventilated with sufficient air circulation.

Please do not put the set into closed areas and do

not cover it.

• Please avoid the contact of the set with water or

humidity. Do not put into operation near bath,

swimming pools.

• Take care to provide a good air circulation. Place

the apparatus in a location with adequate ventilation

to prevent heat build-up in the apparatus.

• Should any solid object or liquid fall into the

cabinet, unplug the apparatus and have it checked

by qualified personnel before operating it any

further.

Apparatus shall not be exposed to dripping or

splashing and no objects filled with liquids,

such as vases, shall be placed on the

apparatus.

The mains plug is used as the disconnect

device, the disconnect device shall remain

readily operable.

CAUTION

Batteries shall not be exposed to excessive heat

such as sunshine, fire or the like.

FRONT PANEL

SAORVIEW Digital Receiver

ON/OFF

KEY

PROG

DOWN

PROG

DISPLAY

NOTE: No display will be shown in standby mode in order to keep the power consumption to a minimum and

save energy.

REAR PANEL

35027700

SCART (TV)

TV OUT AUDIO L AUDIO R

HDMI OUT

DC IN

USB

ANT. IN

1. TV OUT : To watch analogue channels on the TV

2. ANTENNA IN : Aerial input

3. HDMI OUT : HDMI video output

4. USB INPUT

5. TV SCART : TV SCART connection

6. ANALOGUE AUDIO LEFT/RIGHT : Analogue Audio output

7. OPTICAL AUDIO : Optical Digital Audio Output

8. POWER SUPPLY : DC IN (12V)

3. PREPARING

3.1. REMOTE CONTROL

First open the battery cover on the underside of the remote control. Put in both batteries 1.5 Volt (RO3/AAA)

referring to the imprinted symbols (+/-) in the battery case and put on the battery cover again. While using the

remote control, direct it towards the front side of the receiver. If the remote control does not work or the chosen

function does not work, the batteries are most probably exhausted and they should be replaced as soon as

possible. Please use only the leak proof batteries. It is best to remove the batteries from the remote unit if you

will not be using the remote control unit for long time.

3.2. CONNECTIONS

3.2.1. CONNECTION TO THE TV

Connect your set-top box with a scart cable using the TV scart connector on the rear panel to your television’s

scart connector or use an HDMI cable to connect the HDMI output of your receiver to the HDMI input of your TV

(only if your TV has an HDMI input).If you want to get a high quality picture, prefer the HDMI output. The set-top

box gives RGB or CVBS output. If you want to get the picture via scart connector and your TV’s scart connector

has an RGB input, then you can switch your digital set-top box to RGB mode, by toggling TV out menu to RGB

mode, in configuration menu. So, you will be able to achieve high performance from your digital set-top box.

1) Connect one end of Scart cable to TV Scart connector on the STB and the other end of to a Scart connector

on your TV

3.2.2. PUTTING INTO OPERATION

Be sure that you put through all the cable connections. After plugging in the mains cord of the set-top-box to the

mains supply, a red light will be seen on the front panel (Standby mode). When the set-top-box is first powered

up please wait for about 7 seconds before activating the receiver since booting of software will take some time.

Then, you can turn on your digital set-top box by pressing the standby button on the remote control. You will

see that the red light on the front panel will change to blue (Power on mode).

Note: If your set-top-box supports low power mode, then ANT OUT will not work while the box is in standby

mode.

3.2.3. SOCKETS

 TV SCART

 Two IEC Connectors, ANT IN is the antenna input. TV OUT is for to output the loop through of analogue or

digital signals.

 HDMI output

 Analogue audio output (left/right)

 Optical Audio Output (digital audio output)

 USB input (optional)

4. REMOTE CONTROL FUNCTIONS

4.1. REMOTE CONTROL LAYOUT

TEXT BACK

INFO

VOL

2 3

5 6

78 9

ABC DEF

GHI JKL MNO

LIB.

P P

SUBT.

PQRS TUV WXYZ

FAV. WIDE

GUIDE

PIP PIP- SWAPPIP+

TIMERS

AUX

BUTTON FUNCTION

1. Standby ON / Standby

2.  (optional) Search Forward

3. LIB. Media Browser menu

4. Timers Timer Setup

5. (optional) Record button

6. Info I-Bar

7. Direction buttons / OK Navigation / Entering the channel list

8. Back / Exit Exit

9. P+ / P- Channel Up / Down

10. Yellow Yellow Teletext function button / Audio mode selection

11. Blue Teletext function button / Change language

12. Number buttons Numerical buttons

13. PP Swap channels (with last viewed channel)

14. Wide TV aspect ratio mode

15. Subt. Show / Hide Subtitles

16. Swap Change the HDMI resolution

17. PIP + (optional)

PIP Window Channel Up

18. Mute Mute

19.  Used in “Media Browser and EPG” menu

20.  (optional) Search backward

21.  Used in “Media Browser and EPG” menu

22.  (optional) Pause / Timeshift

23. Guide Electronic Program Guide

24. Text Display Teletext

25. V+ / V - Volume UP / DOWN

26. Green Green Teletext function button (used also in “Media Browser”

menu).

27. Red Red Teletext function button (used also in “Media Browser” menu)

28. Aux No function

29. Menu Enter menu / Exit menu

30. Fav Favourite list

31. PIP (optional) Show / Hide PIP window

32. PIP- (optional) Previous channel in PIP window

MENU INTERFACE

FIRST TIME INSTALLATION

When the box is opened from stand-by mode and if there is no channel stored in the database, First Time

Installation Menu window is displayed on the screen. In the first window, menu language is asked.

Then, you are asked to choose the country you are located.

After choosing the country, you have to set your TV type in the next window.

The next menu will ask you to choose the HDMI resolution. If you intend just using the Scart output then just

press SELECT and continue the scanning process.

Using the [LEFT] or [RIGHT] buttons on the remote control, you can select between; 576p, 720p and 1080i.

Please check the HDMI resolutions supported by your TV set and select the most appropriate one from this

menu. Afterwards set the antenna supply;

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Walker Empfänger Handbücher

Walker

Walker WPS818C SAORVIEW Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung