WANHAO DUPLICATOR I3 MINI Bedienungsanleitung
INSTRUCTION MANUAL
DUPLICATOR I3 MINI
DESKTOP 3D PRINTER
MODEL NUMBER:DUPLICATOR I3 MINI
Important
Getting the most out of your 3D Printer:
Read the manual carefully
It will help you get set up with ease
Visit www.wanhao3dprinter.com
We’ve got additional support videos and guides
Email support@wanhao3dprinter.com
We’re always happy to help
Warranty Note
If you experience any issues with this product, or it’s
performance is not what you had expected, please contact
us at WANHAO before returning the item to the store.
It is likely that we can resolve any problems for you via
phone or email.
We can be reached through your local distributor. Or on
Phone: +86-571-23290996(Mon-Sat; 8:30am-5:00pm)
Email: [email protected]
Web: www.wanhao3dprinter.com
Join Wanhao Technical Forum for online support
https://groups.google.com/forum/#!forum/wanhao-printer-3d
Read the manual carefully
It will help you get set up with ease
Visit www.wanhao3dprinter.com
We’ve got additional support videos and guides
Email support@wanhao3dprinter.com
We’re always happy to help
Join Wanhao Technical Forum for online support
https://groups.google.com/forum/#!forum/wanhao-printer-3d
Google Forum
Google Forum
3D Printer
Warranty Details
The product is guaranteed to be free from defects in workmanship and mother board for a period
of 12 months from the date of purchase. The extruder is guaranteed to be free of defects for 90
days. Printing with materials other than WANHAO FILAMENTS which require temperatures above
250 °C or which are different from those recommended on the website www.wanhao3dprinter.
com, will result in the immediate loss of the Warranty. Defects that occur within this warranty
period, under normal use and care, will be repaired, replaced or refunded at our discretion.
The bene ts conferred by this warranty are in addition to all rights and remedies in respect of
the product that the consumer has under the China laws. In case you purchase from WANHAO
distributor, your warranty shall be covered by distributor’s Warranty and honored by WANHAO
distributor too.
Our goods come with guarantees that cannot be excluded under the Chinese Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to
a major failure.
AFTER SALES SUPPORT
86-571-23290996 [email protected]
MODEL: Duplicator I3 MiNi
4
Safety Instructions
Before you get started, please read these important safety instructions.
CAUTION: The WANHAO 3D Printer generates high temperatures and includes moving parts
that can cause injury. Never reach inside of the WANHAO 3D Printer while it is in operation,
and allow time for the printer to cool down after operation.
HOT SURFACE MOVING PARTS
Vapours/fumes may be irritating at operating temperatures. Always use the WANHAO
3D Printer in an open, well ventilated area.
Do not leave the WANHAO 3D Printer unattended during operation
Contact with extruded material may cause burns. Wait for printed objects to cool before
removing them from the build platform.
Always take care when using the Scraper. Never direct the Scraper towards your ngers.
• The printer must not be exposed to water or rain, or damage will occur.
• The printer is designed to be used with ambient temperature ranging 15°C - 30°C, and humidity
ranging 20% - 50%. Operating outside these limits may result in low quality models.
• In case of emergency, turn off the 3D printer at the power outlet.
• It is recommended that you use eye protection when cleaning/sanding printed models to avoid
small particles contacting eyes.
• Please read and understand the contents of this installation and user manual carefull.Failure to
read the manual to make the most out of the WANHAO 3D Printer.
• The WANHAO 3D Printer is not intended for use by persons with reduced physical and / or
mental capabilities, or lack of experience and knowledge,unless they have been given
supervision or instruction concerning the use of the appliance by a person responsible
for their safety.
• Children should be under constant supervision when using the printer.
• Before installation ,you should make sure that the WANHAO 3D Printer is unplugged from the
power supply. Only use furniture that can safely suppport WANHAO 3D Printer.
• Ensure the mains socket-outlet is near the equipment and is easily accessible.
5
Only use the WANHAO 3D Printer in a clear working area.
Contents
Warranty Details 4
Safety Instructions 5
Technical Specications
8
Introduction
9
1.1 What is 3D Printing?
10
1.2 From 3D Design to Printed 3D Object
10
10
Parts List
12
12
Product Overview
13
2.1 Printer Front View
14
2.2 Printer Rear View
2.3 Control Panel
15
15
Product Assembly & Intial Setup
16
3.1 Unboxing and Assembly
16
3.2 Home Screen
17
3.3 Navigating the Menus
18
3.4 Menus Tree
3.5 Adding Filament
3.6 Levelling The Bed
3.6.1 The Levelling Wizard
3.6.2 Manually Levelling the Bed
Printing and Removing Models
4.1 Printing a File
4.1.1 During Print Settings
4.2 Good 3D Printing Practices
4.3 Removing 3D Objects from the Bed
4.4 Removing Filament
4.5 Quick Settings
4.6 Advanced Settings
4.7 Filamnent
4.7.1 PLA Filament
4.8 Storage
6
18
18
19
20
20
20
21
22
22
23
23
24
25
25
24
25
25
4.9 Creating and Printing your Own Models
4.9.1 Saving Files to MicroSD Card
4.9.2 Creating a WANHAO File Using Cura
4.9.3 Installing Cura
4.9.4 Adding your WANHAO 3D Printer to Cura
4.9.5 Loading a 3D Design into Cura
25
26
26
Servicing
5.1 Servicing your Duplicator I3 MiNi
5.1.1 Replacting the Print Mat
5.1.2 Nozzle Cleaning
5.1.3 Routine Component Check
5.1.4 Storing
Finishing
Maintenance
10.1.2 Commectivty Problems
10.1.3 Other Problems
Appendix
References
Repair and Refurbished Goods or Parts Notice
7
27
27
27
27
28
28
29
29
29
29
30
30
31
31
32
32
32
33
34
35
36
36
6.1 Finishing Techniques
6.1.1 Useful Tools/Equipment
6.1.2 Removing Support Material
6.1.3 Sanding
6.1.4 Surface Coating
Disposal of Packaging
Disposal of Product
Troubleshooting
10.1 Troubleshooting
10.1.1 Printing Problems
37
29
10.2 Useful Terms
Parts List
1 x WANHAO 3D Printer
1 x Filament Spool Stand
1 x Power Cable
1 x USB Cable
1 x 4GB MicroSD Card
1 x Scraper
1 x PTFE Tube
1 x Hex Key Set
1 x Cable Ties
1 x 10m PLA Filament
1 x Spare Print Bed Mats
1 x Instruction Manual
(Not Shown)
1 x Getting Started Guide
(Not Shown)
1 x Warranty Card
(Not Shown)
1 x Levelling Card
1 x Solid glue
8
1 x PTFE Tube
Technical Specications
Printing
Print Technology: Fused Filament Fabrication (FFF)
Build Volume: 120 x 135 x 100 mm(Width x Depth x Height)
Layer Resolution: 0.1 – 0.4mm
Positioning Accuracy: X 0.012mm
Y 0.012mm
Z 0.004mm
Extruder Quantity: Single Extruder
Nozzle Diameter: 0.4mm
Print Speed: 10mm/s - 70mm/s
Travel Speed: 10mm/s - 70mm/s
Supported Print Materials: WANHAO Branded PLA, PLA Wood
Temperature
Ambient Operating Temperature: 15°C – 30°C
Operational Extruder Temperature: 170°C - 260°C
Software
Slicer Software: Cura Wanhao Edition
Cura Input Formats: .STL, .OBJ, .DAE, .AMF
Cura Output Format: .GCODE
Connectivity: Micro SD Card, USB port (Firmware updating only)
Electrical
Input Rating: 85~264V AC, 47~63HZ,
0.95A/115VAC 0.56A/230VAC
Physical Dimensions
Printer Frame Dimensions: 325 x 240 x 380 mm(Width x Depth x Height)
Weight: 7KG
9
INTRODUCTION
1.1 What is 3D Printing?
3D Printing is a process whereby a real object is created from a 3D Design. Fused Filament
Fabrication (FFF) is one of the most common technologies used by 3D Printers to achieve this.FFF
works on an 'additive' principle by laying down material, such as PLA or ABS lament,in layers to
create a 3D object.
1.2 From 3D Design to Printed 3D Object
3D Design Slice to GCODE Setup WANHAO 3D Printer
3D Printing Process 3D Printed Object
3D Design
Having a 3D design is the rst step to creating a 3D Object.
There are a number of free 3D Designs that can be downloaded
and printed for personal use. Websits such as Thingiverse.com,
Pinshape.com and YouMagine.com are a good place to start,
but there are many more available!
Alternatively,you can create your own 3D Design using 3D Modelling Software. Programs such as
Sketchup or Blender allow this, however this can take some practice before successfully modelling
your 3D Design. After you've nished your 3D Design,you can export it as an. STL le,to be imported
into a 'Slicer' program such as Cura.
Slice to GCODE
A 'Slice' converts a 3D Design (usually an .STL or .AMF format)into
individual layers. It then generates the machine code (such as GCODE)
that the 3D Printer will use for printing.
We recommend the program Cura as it uses a simple interface and includes a large amount of
10
Inhaltsverzeichnis
Andere WANHAO 3D-Drucker Handbücher
WANHAO
WANHAO Duplicator 5 Bedienungsanleitung
WANHAO
WANHAO DUPLICATOR 9 Bedienungsanleitung
WANHAO
WANHAO Duplicator 7 Plus Bedienungsanleitung
WANHAO
WANHAO Duplicator 8 MARK I Bedienungsanleitung
WANHAO
WANHAO Duplicator 10 Bedienungsanleitung
WANHAO
WANHAO MARK II Duplicator 6 Plus Bedienungsanleitung
WANHAO
WANHAO Duplicator 5S Bedienungsanleitung
WANHAO
WANHAO DUPLICATOR 9 Bedienungsanleitung
WANHAO
WANHAO Duplicator I3V2 Bedienungsanleitung
WANHAO
WANHAO D12 300 Bedienungsanleitung
WANHAO
WANHAO Duplicator i3 Merkblatt
WANHAO
WANHAO Duplicator I3V2 Bedienungsanleitung
WANHAO
WANHAO Duplicator Five Bedienungsanleitung
WANHAO
WANHAO DUPLICATOR 7 Bedienungsanleitung
WANHAO
WANHAO Duplicator i3 Bedienungsanleitung
WANHAO
WANHAO GADOSO GR1 Bedienungsanleitung
WANHAO
WANHAO Duplicator 3/4 Bedienungsanleitung
WANHAO
WANHAO Duplicator i3 Bedienungsanleitung
WANHAO
WANHAO Duplicator i3 Bedienungsanleitung
WANHAO
WANHAO Duplicator i3 Bedienungsanleitung
