Wansview W6 Bedienungsanleitung
Wansview Cloud APP User Manual
1080P Outdoor Security Camera
W6
https://www.wansview.com/
Contents
Chapter 2 Install Wansview Cloud APP 02
02
02
03
Chapter 1 Camera Introduction 01
01
Chapter3 Setup Mode 04
04
06
08
11
12
12
13
15
17
Chapter 4 Live Feed 10
Chapter 5 Settings and Functions 11
Chapter 6 Optional Storages 18
18
20
Chapter 7 Me page 23
Chapter 8 Alexa Compatibility 24
2.1 Download app
2.2 Account Register
2.3 Sign in
3.1 Wi-Fi Setup
3.2 Wi-Fi connection by Soft-AP
3.3 Eth connection by cable
5.1 Share with Family
5.2 Motion Detection
5.3 Motion Alert
5.4 RTSP Setting
5.5 Camera Information
5.6 Advanced Settings
6.1 Memory Card Storage
6.2 Cloud Services
1.1 Indicator Light Status
Wansview Cloud APP User Manual
www.wansview.com 0
Wansview Cloud APP User Manual
Microphone
Camera Lens
Photoresistor
Speaker
TF card slot
Antenna
Reset button
RJ45 interface
Power port
Warm note: Please make sure your router is connected to Internet.
www.wansview.com 01
1.1 Indicator lights status
Camera StatusLight Status
Camera Introduction
CHAPTER 1
Yellow light on
Yellow and green lights are flashing alternately
Green light is flashing
Green light is solid
Yellow light is flashing quickly
Camera is powered on
Waiting for connect now
Camera is connecting to WIFI
Connect WIFI and Pair successfully
Reset camera to factory setting
Wansview Cloud APP User Manual
Install Wansview Cloud APP
CHAPTER 2
2.1 Download app
Please download Wansview Cloud app from APP store/Google Play.
2.2 Account Register
Enter your email address and the password.
Pay attention that your password MUST be 8-16 characters, and include at least 3 categories of the
following: Digits,Uppercase characters, Lowercase characters, Special characters.
Read and agree the Terms of Use and Privacy Policy, then tap Next.
Open the Wansview Cloud app and click【Sign up】
www.wansview.com 02
1
2
Wansview Cloud APP User Manual
Please go to your mailbox to find a mail that includes a verification code,enter the code to finish the Sign
up.
If you cannot find the mail, please check the spam or and tap Re-send mail. Or you can contact us by
sending an email to service@wansview.com. You can also choose Phone number or Google account to
sign in.
2.3 Sign in
When using for the first time, you need to enter the email address and password of your app account to log in.
After signing in successfully, you can set a gesture login or Touch ID. (Wansview cloud app--Me page--
【Account security】--【Touch ID/Gesture login】)
www.wansview.com 03
3
Wansview Cloud APP User Manual
Setup Mode
CHAPTER 3
3.1 Wi-Fi Setup
Note: The camera can only support 2.4Ghz Wi-Fi, it doesn’t support 5Ghz Wi-Fi.
Place the camera near the router within 3 feet and power on the camera with the attached power cord.
Make your phone use the 2.4G Wi-Fi.
Tap 【Add Device】on the APP, and choose the camera model W6.
Select 【Wi-Fi connection by QR code】Check if the camera's indicator light is flashing yellow and green,
if yes, tap【Flashing】.
www.wansview.com 04
1
2
3
Wansview Cloud APP User Manual
Check the indicator light status. If the connection is successful, the blue light will be solid. You can
rename the camera, and start using the camera.
The Wi-Fi name will be displayed automatically, then enter the correct Wi-Fi password and tap Next.
If Wi-Fi name is not displayed, for Android phone, please go to the Phone Setting--APP Manage-
ment--Find Wansview Cloud APP--Permissions--Allow the app to get the location info.
Adjust your screen brightness to the medium,then place the camera lens about 3-8 inches in front of the
phone and make the camera scan the QR code on the phone screen.
When hearing”QR code scanning is successful”, tap Next.
www.wansview.com 05
4
5
6
Wansview Cloud APP User Manual
3.2 Wi-Fi connection by Soft-AP
Place the camera near the router within 3 feet and power on the camera with the attached power cord.
Make your phone use the 2.4G Wi-Fi.
Tap Add Device on the APP, and choose the camera model W6.
Select 【Wi-Fi connection by Soft-AP】Use your phone camera to scan the QR code on the
camera sticker.
www.wansview.com 06
1
2
3
Wansview Cloud APP User Manual
Check if the camera's indicator light is flashing yellow and green. If yes, tap【Flashing】.
Tap Go to Settings--Find a Wi-Fi named WVC*****,connect with this Wi-Fi. Then go back to Wansview
cloud app.
The app will ask you to choose a network. Select 2.4G Wi-Fi and enter the password. The camera will
start connect with the Wi-Fi. After the camera is online, you can rename the camera, and start using the
camera.
4
5
www.wansview.com 07
Wansview Cloud APP User Manual
www.wansview.com 08
Use the Ethernet cord to connect the camera with router firstly, then plug the camera in via power cable.
Connect your phone to 2.4Ghz WIFI. Run the Wansview Cloud app , tap + , choose W6 model.
1
Use the Ethernet cord to connect the camera with router firstly, then plug the camera in via power cable.
Connect your phone to 2.4Ghz WIFI. Run the Wansview Cloud app , tap + , choose W6 model.
2
3.3 Eth connection by cable
Inhaltsverzeichnis
Andere Wansview Sicherheitskamera Handbücher
Wansview
Wansview NCZ-550W Bedienungsanleitung
Wansview
Wansview Q1 Bedienungsanleitung
Wansview
Wansview Q7 Bedienungsanleitung
Wansview
Wansview W7 Bedienungsanleitung
Wansview
Wansview W3 Bedienungsanleitung
Wansview
Wansview B4 Bedienungsanleitung
Wansview
Wansview Q5 Bedienungsanleitung
Wansview
Wansview Q7 Bedienungsanleitung
Wansview
Wansview NCS601W Bedienungsanleitung
Wansview
Wansview 703GC Bedienerhandbuch
