Warmup W3115DT AU Bedienungsanleitung

Dual Touch

Thermostats

W3115DT & W3115DT Black

Menu Structure

Time

Day

Mode

A/F/AF mode

Period display

Power Button

Menu button

Confirm button

Setting function

Temperature

Preset temperature

Arrow keys

Return button

Points to note:

To turn off the heating

Tap the power button once to turn off the heating; the towel rail will remain ON

To turn off both –the underfloor heating and the towel rail

Press and hold the power button for 3 seconds

Read the Electrical Requirements supplied with the thermostat. This thermostat uses an

electronic off so it can only be used for functional (control) switching. It cannot be used as

an isolation switch. The power supply needs to be on RCD protection and needs a separate

isolation switch for the supply.

The towel rail is programmed to remain on for 3 hours (by default). You can change this to 1

or 2 hours by pressing and holding the menu button for 3 secs till a number pops up. Scroll

down to 24, press tick and set the minutes to 60 (1 hour) or 120 (2 hours).

Startup Wizard

1. Press 5 times to select Time and press

to confirm.

2. Use the top and down arrow keys to

i. Set the hour then press to confirm

ii. Set the minutes, press to confirm

3. Press to exit

1. Press 4 times to select Date and press to

confirm.

2. Use the up and down arrow keys to

i. Set the year and press to confirm

ii. Set the month and press to confirm

iii. Set the day and press to confirm

iv. Set the day of the week, press to confirm

3. Press to exit.

1 Date

2 Time

Date

Days

MM YY

Day of the week

Time

PM H:M

You will now have to select from the following options: You can either have a manual mode,

automatic mode with 2 settings a day or 4 settings a day.

Manual mode –where the heating will be on for 24 hours or until you turn it off.

Automatic mode with 2 settings - i.e. one heating cycle a day where the heating goes on and

off at your specified times.

Automatic mode with 4 settings where you will have 2 heating cycles a day.

Mode

Switch on the thermostat by pressing the Power button. If power has been applied for the first

time, you will have to set the date and time.

iii

1. Press once to select Mode and press to

confirm.

2. Use the arrow keys to select Manual mode

and press to confirm.

3. Use the arrow keys to set the temperature

and press to confirm

4. Press twice to go back to the main screen

Mode

3 Manual

24.0 °C

Set

The thermostat comes with pre-programmed schedule for easy and economic heating control

of most homes. Below are the factory settings or the preset schedule for the week. The

schedule for Saturday and Sunday is different.

This schedule can be changed in the Schedule menu.

Wake Up Leave Home Come Home Go to Sleep

5:30 8:00 18:00 21:30

24°C 16°C 24°C 16°C

Pre-programmed schedule

4. Press twice to select Schedule and press to confirm.

The Automatic icon, House # 1 and the current day of the

week will flash.

5. Press to select the day of the week or the whole week

and press to confirm.

6. Set the hour using the arrow keys & press

to confirm. Now set the minutes and press to confirm.

7. Now set the comfort temperature and confirm. It now

switches to House # 2.

House # 2

8. You are now on House 2 –the time the heating switches off.

Adjust the hour using the arrow keys and press to

confirm.

9. Set the minutes using the arrow keys and press to confirm.

10. Now set the economy temperature and confirm.

House # 3

11. Hold the down arrow key until you see 4 dashes for the time

and press to confirm.

House # 4

12. You are now on House 4. Again hold the down arrow key

until you see 4 dashes for the time and press to confirm.

13. Touch the return button twice to go back to the main screen.

Sched

4 Automatic mode (2 settings)

1. Press once to select Mode and press to

confirm.

2. Use the arrow keys to select Automatic

mode and press to confirm.

3. Press twice to go back to the main screen.

Mode

4. Press twice to select Schedule and press to confirm.

The Automatic icon, House # 1 and the current day of the week will

flash.

5. Press to select the day of the week or the whole week

and press to confirm.

6. Set the hour using the arrow keys & press

to confirm. Now set the minutes and press to confirm.

7. Now set the comfort temperature and confirm. It now

switches to House # 2.

House # 2 (the time you leave home or to switch off the heating)

8. Adjust the hour using the arrow keys and press to confirm.

9. Set the minutes using the arrow keys and press to confirm.

10. Now set the economy temperature and confirm. It now switches

to House 3.

House # 3 (the time you return home or to switch on the heating)

11. Adjust the hour using the arrow keys and press to confirm.

12. Set the minutes using the arrow keys and press to confirm.

13. Now set the comfort temperature and confirm. It now switches

to House 4.

House # 4 (the time the heating switches off or the time you go to

sleep)

14. Adjust the hour using the arrow keys and press to confirm.

15. Set the minutes using the arrow keys and press to confirm.

16. Now set the economy temperature and confirm.

17. Touch the return button twice to go back to the main screen.

5 Automatic mode (4 settings)

1. Press once to select Mode and press to

confirm.

2. Use the arrow keys to select Automatic

mode and press to confirm.

3. Press twice to go back to the main screen.

Mode

6 Heated towel rail

1. Press three times to select Towel and press to confirm.

2. House # 1 and the time will flash.

3. Press to adjust the hour and press to confirm.

4. Now set the minutes and press to confirm.

6. It will now move to House 2. Set the hour and minutes and

press to confirm.

7. Set the hour and minutes for house 3 and press to confirm.

8. Set the hour and minutes for house 4 and press to confirm.

9. Press twice to exit the user setting and go back to the

main screen.

If you want the towel rail to come on twice a day, set the 2 times and use the

key to set the remaining 2 times to ---- (dash)

The towel rail is programmed to remain on for 3 hours by default. The following table shows

the default setting where the towel rail is ON only twice a day and settings 2 and 3 are blank.

If you would like to change the above settings, follow the steps below:

Setting On Off

Setting 1 5:30 8:30

Setting 2 -- --

Setting 3 -- --

Setting 4 18:00 21:00

1. Press once to select Mode and press to

confirm.

2. Use the arrow keys to select Vacation mode

and press to confirm.

3. Use the arrow keys to set the number of

days you will be away and press to confirm

4. Press twice to go back to the main screen

(Vacation mode is enabled immediately and the floor

will be set to a temperature of 10 degrees until

disabled)

Mode

7 Vacation setting

1. Press 7 times to select Bright and to

confirm.

2. Use the top and down arrow keys

to adjust the brightness (Range 1-5) and press

to confirm.

3. Press to exit

8 Brightness

Bright

5Set

1. Press 6 times to select Clean and press to confirm.

2. All keys will lock for 10 seconds

3. Press to exit

9 Clean

Engineering Settings

1. Press and hold for 3 seconds to enter the internal setting operation.

2. Use the up and down arrow keys to select the number to change the setting and

press to confirm.

3. Press to leave the internal setting screen.

No Setting Parameter Default

2. Towel Rail Control 0. Towel rail disabled

1. Towel rail enabled 1

3. Control mode

A/F/AF

0. F (Floor sensor)

1. A (Air Sensor)

2. AF (Air Sensor with Floor Limiter)

15. Temperature format 0: Deg C

1: Deg F 0

16. Clock format 0: 12 hours

1: 24 hours 0

22. Reset to default

settings

0: No

1: Reset 0

24. Towel rail set time 0-180 mins 180

Andere Handbücher für W3115DT AU

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Warmup Thermostat Handbücher

Warmup

Warmup 4iE WiFi Bedienungsanleitung

Warmup

Warmup 3IE Bedienungsanleitung

Warmup

Warmup 6iE Bedienungsanleitung

Warmup

Warmup 5iE Bedienungsanleitung

Warmup

Warmup 3IE Bedienungsanleitung

Warmup

Warmup WA-TSTAT-V Bedienungsanleitung

Warmup

Warmup 3IE Bedienungsanleitung

Warmup

Warmup UDG Bedienungsanleitung

Warmup

Warmup UCCG Installationshandbuch

Warmup

Warmup tempo ELT-01-XX-01 Bedienungsanleitung

Warmup

Warmup W3WT01 Bedienungsanleitung

Warmup

Warmup 3IE Bedienungsanleitung

Warmup

Warmup OCC2 Bedienungsanleitung

Warmup

Warmup 6iE Bedienungsanleitung

Warmup

Warmup TH115 A Bedienungsanleitung

Warmup

Warmup + Kit Bedienungsanleitung

Warmup

Warmup W3115DT AU Bedienungsanleitung

Warmup

Warmup W3115 Bedienungsanleitung

Warmup

Warmup MTC-1991-WU Bedienungsanleitung

Warmup

Warmup 3IE Bedienungsanleitung

Warmup

Warmup 6iE Bedienungsanleitung

Warmup

Warmup WA-TSTAT-V Bedienungsanleitung

Warmup

Warmup 4iE WiFi Kurzanleitung

Warmup

Warmup Element Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung