Watchguard XTM 545 Montageanleitung

WatchGuard

XTM 5 Series

Hardware Guide

XTM 515, 525, 535, 545

NC2AE8

ii WatchGuard XTM 5 Series

ADDRESS

505 Fifth Avenue South

Suite 500

Seattle, WA 98104

SUPPORT

www.watchguard.com/support

U.S. and Canada +877.232.3531

All Other Countries +1.206.521.3575

SALES

U.S. and Canada +1.800.734.9905

All Other Countries +1.206.613.0895

ABOUT WATCHGUARD

WatchGuard offers affordable, all-in-one network and content security solutions that

provide defense-in-depth and help meet regulatory compliance requirements. The

WatchGuard XTM line combines firewall, VPN, GAV, IPS, spam blocking and URL

filtering to protect your network from spam, viruses, malware, and intrusions. The new

XCS line offers email and web content security combined with data loss prevention.

WatchGuard extensible solutions scale to offer right-sized security ranging from small

businesses to enterprises with 10,000+ employees. WatchGuard builds simple, reliable,

and robust security appliances featuring fast implementation and comprehensive

management and reporting tools. Enterprises throughout the world rely on our

signature red boxes to maximize security without sacrificing efficiency and

productivity.

For more information, please call 206.613.6600 or visit www.watchguard.com.

WatchGuard, the WatchGuard logo, LiveSecurity, and any other mark listed as a trademark in the “Terms of Use” portion of

the WatchGuard Web site that is used herein are either registered trademarks or trademarks of WatchGuard Technologies,

Inc. and/or its subsidiaries in the United States and/or other countries. All other trademarks are the property of their

respective owners.

Printed in the United States of America.

Part Number: 275-4210-001 Rev A

Revised: June 15, 2012

U.S. Patent Nos. 6,493,752; 6,597,661; D473,879. Other Patents Pending.

Notice to Users

Information in this guide is subject to change without notice. Updates to this guide are posted at:

http://www.watchguard.com/help/documentation/hardware.asp

Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this guide may be

reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express

written permission of WatchGuard Technologies, Inc.

Complete copyright, trademark, patent, and licensing information

can be found in the WatchGuard product documentation. You can

find this document online at:

http://www.watchguard.com/help/documentation/

Hardware Guide 1

Hardware Specifications

WatchGuard® XTM security appliances deliver unparalleled unified threat management, superior

performance, ease of use, and value for your growing network. Our security subscriptions give you fully

integrated protection from spyware, spam, viruses, worms, trojans, web-based exploits, and blended threats.

From firewall and VPN protection to secure remote access, WatchGuard devices support a broad range of

network environments.

This guide introduces the XTM 5 Series, a series of RoHS-compliant (lead-free) hardware products offered by

WatchGuard.

WatchGuard’s XTM 5 Series devices use dynamic, multi-layered security to proactively protect your network.

The XTM 5 Series has the reliability, redundancy, traffic management, and port density that demanding, high-

speed networks require.

You can upgrade some XTM 5 Series devices to a higher model in the XTM 5 Series line for more capacity and

performance with a software license key.

Note

This Hardware Guide applies to XTM 5 Series devices with model numbers XTM 515, 525, 535,

and 545. If your 5 Series device has a different model number, your hardware is described in the

XTM 5 Series Hardware Guide that applies to that model.

Fireware XTM OS

The XTM 5 Series devices support WatchGuard’s next generation UTM OS—Fireware® XTM. Each XTM 5 Series

device includes Fireware XTM and delivers exceptional protection against today's sophisticated threats to

make sure that your business stays connected. As an option, you can purchase a Pro upgrade to Fireware XTM

to enable additional advanced networking capabilities. For more information on the features of Fireware XTM

OS, see the current Fireware XTM WatchGuard System Manager Help or Fireware XTM Web UI Help.

2WatchGuard XTM 5 Series

Hardware Specifications

Package Contents

CD-ROM with this Hardware Guide

XTM 5 Series appliance

Quick Start Guide

Hardware warranty card

LiveSecurity® Service activation card

Safety Notices

Declaration of Conformity

1 straight-through Ethernet cable (green)

1 cross-over Ethernet cable (red)

1 serial cable with an RJ45 connector

1 power cord

4 rubber pads for the bottom of the device

1 rack-mounting kit

About Your Hardware

Hardware Specifications

Interface Specifications

XTM 5 Series

Processor Intel Dual Core

Memory: Flash 1 GB

Memory: RAM 2 GB

Power supply 100-240 VAC

Autosensing

Dimensions D= 11.25” (28.6 cm)

W= 17” (43.18 cm)

H= 1.75” (4.45cm)

Weight 10.15 lbs

Network interfaces • 6x 1000Base-T (10/100/1000 Mbps), RJ45 connector

• 1x 100Base-TX (10/100 Mbps), RJ45 connector

I/O interfaces •2USB

• 1 RJ45 serial

Hardware Guide 3

Hardware Specifications

Environmental Requirements

To safely install your XTM 5 Series device, we recommend that you:

Install it in a network rack

Put it in a secure area, such as a locked room, to block the device from people who do not have

permission to use it

Connect it to a conditioned power supply to prevent damage from sudden power changes

Other environmental requirements:

Operating temperature 0 – 40°C

(32 – 104°F)

Operating relative humidity 10% - 85% non-condensing

Non-operating temperature –40 – 70°C

(–40 – 158°F)

Non-operating relative humidity 10% – 90%

4WatchGuard XTM 5 Series

Hardware Specifications

Front View

The front of the device.

This is a close-up of the right side of the front of the device.

LCD indicator panel

Device status information appears on the LCD screen. Press the buttons below the screen to change

the information that appears on the screen.

For more information, see “Use the LCD Interface” on page 8.

LCD console buttons

Press the LCD console buttons to see status information and start recovery procedures.

To boot the device in safe mode, press and hold the down arrow button when you power on the

device.

For detailed information about the LCD indicator panel and the LCD console buttons, see “Use the

LCD Interface” on page 8.

Power ( )

When the device is powered on, the power indicator is green.

Arm/Disarm

When the device is armed, this indicator is green. When the device is disarmed, this indicator is red.

Storage ( )

When there is activity on the compact flash, this indicator is yellow.

All interfaces are on the front of the device.

Serial port (Console)

An RJ45 connector for the serial interface.

Hardware Guide 5

Hardware Specifications

Dual USB interface

Connect a USB storage device to use for USB backup and restore, or to store a support snapshot.

For more information about USB functions, see the Fireware XTM WatchGuard System Manager Help

or Fireware XTM Web UI Help.

Network Interfaces

The interfaces have standard RJ45 connectors and are labeled 0,1,2,3,4,5,6.

Interface 0 — supports link speeds of 10 or 100 Mbps.

Interfaces 1 - 6 — support link speeds of 10, 100, or 1000 Mbps.

Interface 0 does not support Auto-MDIX, which automatically senses the cable polarity. Use these

guidelines to decide which type of Ethernet cable to use with Interface 0.

To connect Interface 0 to an interface on a switch or router that supports Auto-MDIX, you can

use either Ethernet cable.

To connect Interface 0 to an interface on an older switch or router that does not support Auto-

MDIX, use the green Ethernet cable. Your switch or router could be set to a different polarity. If

the green Ethernet cable does not work, try the red cross-over Ethernet cable.

To connect Interface 0 to a PC, use the red cross-over Ethernet cable.

Indicators for network interfaces

At the top of each labeled network interface, there is a pair of indicators. The indicator at the left of

the interface is the activity indicator for that interface. The indicator at the right shows the connection

speed for that interface.

Note

When the device is powered off, but the AC power is plugged in, the Link and Activity indicators for

interface 0 continue to operate, but the interface does not pass traffic. All other network interface

indicators are inactive.

Indicator Indicator color Interface Status

Activity (upper left) Yellow Power on, connection established

Not lit Power off, no connections

Blinks

(speed of blink increases as the

data flow increases)

Data sent and received

Connection Speed

(upper right)

Not lit Link speed: 10 Mbps

Green Link speed: 100 Mbps

Yellow Link speed: 1000 Mbps

6WatchGuard XTM 5 Series

Hardware Specifications

Rear View

The AC receptacle, fans, and power switch are on the rear of the device.

AC receptacle

Accepts a detachable AC power cord supplied with the device. The power supply for the device is a

WatchGuard standard auto-sensing AC power supply.

Fans

The fans decrease the internal temperature of the device.

Power switch

Controls the power supplied to the device. To power on the device, press the switch. To power off the

device, press and hold the switch for at least 5 seconds.

Caution

You must disconnect the power supply before you remove the cover of the XTM 5 Series

device. If you open the cover without prior authorization from WatchGuard, this voids the

Hardware Warranty.

Rack Mount Instructions

Each WatchGuard XTM 5 Series device ships with a rack mount kit. When you install the XTM 5 Series device

in a rack, make sure you consider:

Elevated Operating Ambient Temperature

If you install the XTM 5 Series device in a closed or multi-unit rack assembly, the operating ambient

temperature of the rack environment could be greater than the ambient temperature of the room.

The XTM 5 Series device is certified to operate correctly between 0 – 40°C (32 – 104°F).

Reduced Air Flow

When you install the XTM 5 Series device in a rack, make sure that the amount of air flow required for

safe operation of the equipment is not compromised.

Mechanical Loading

When you mount the XTM 5 Series device in the rack, avoid hazardous conditions caused by uneven

mechanical loading.

Circuit Overloading

Make sure you connect the XTM 5 Series device to the power supply circuit to make sure there is no

overloading of the circuits, and no impact on overcurrent protection and supply wiring.

Reliable Grounding

Make sure all rack-mounted equipment is correctly grounded. For example, use power strips instead

of direct connections to the branch circuit.

Hardware Guide 7

Hardware Specifications

Safety Notices

All WatchGuard products are designed and tested to meet strict safety requirements. These requirements

include product safety approvals and other global compliance standards. Read these instructions carefully

before you operate the product, and refer to them as needed for continued safe operation of your product.

Product Safety Certification

The WatchGuard product is safety certified for these standards:

oCAN/CSA C22.2 No.60950-1-07

oIEC 60950-1, Second Edition

oUL 60950-1, Second Edition

Safety Warning

oDo not place objects on the power cord.

oDo not obstruct the ventilation openings. These openings prevent overheating of the XTM device.

oNever push objects of any kind into slots or openings on this equipment. If you make contact with a

voltage point or short out a part, it can result in fire or electrical shock.

oIf the equipment is supplied with a three-conductor AC power cable, the power cable must be

plugged in to an approved three-contact electrical outlet with the grounding wire connected to an

electrical ground (safety ground) at the power outlet.

oWhen you remove or install an appliance, follow the general installation safety instructions provided

in this Hardware Guide to avoid injury or damage to the device.

oThe lithium battery used in the security appliance may not be replaced by the user. Return the

appliance to a WatchGuard authorized service center for replacement with the same or equivalent

type recommended by the manufacturer. If, for any reason, the battery or security appliance must be

disposed of, do so following the battery manufacturer’s instructions.

8WatchGuard XTM 5 Series

Hardware Specifications

Use the LCD Interface

You can use the LCD interface and buttons for different operations.

The XTM 5 Series can operate in two modes:

Normal Mode

The device normal operating mode, with the XTM 5 Series device booting from the Fireware XTM OS

and operating with the rules set in the configuration file you have saved to the device.

Safe Mode

In safe mode, you can get access to an XTM 5 Series device when normal access to the device is lost.

You can also use safe mode to reset device passphrases when you do not know or have forgotten

them. To recover the device while started from safe mode, you must use the WSM Quick SetupWizard

or the Web Setup Wizard.

You must put the XTM 5 Series device in safe mode to use the setup wizards. In safe mode, the device

runs Fireware XTM and is configured with factory-default IP addresses. When you put the device in

safe mode, the license files and certificates are saved. You can then use the saved files if you

reconfigure a device with one of the setup wizards.

To put an XTM 5 Series device into safe mode, press and hold the down arrow button on the device

front panel when you power on the device. Hold down the button until “Safe Mode Starting” appears

on the LCD screen. When the device is in safe mode, the model number followed by the word “Safe”

appears on the LCD screen and the factory default IP address for Eth1 is 10.0.1.1/24.

LCD Keypad Button Control

Below the LCD screen, there are four arrow buttons.

Up Arrow

With this button, you can increase the value of a selected item, or move up in a group menu.

Down Arrow

With this button, you can decrease the value of a selected item, or move down in a group menu.

Left Arrow

This is the “selection” or “Enter” button. Press it to confirm your menu selections and select different

options.

Right Arrow

Press this button to select fields in the LCD display. You can use it like the “TAB” key in a Windows

dialog box.

Inhaltsverzeichnis

Andere Watchguard Netzwerk-Router Handbücher

Watchguard

Watchguard AP325 Bedienungsanleitung

Watchguard

Watchguard XTM 810 Montageanleitung

Watchguard

Watchguard Firebox T55 Montageanleitung

Watchguard

Watchguard C-100 Bedienungsanleitung

Watchguard

Watchguard XTM 5 Series Montageanleitung

Watchguard

Watchguard Firebox Vclass V100 Montageanleitung

Watchguard

Watchguard Firebox T20-W Bedienungsanleitung

Watchguard

Watchguard SOHO Bedienungsanleitung

Watchguard

Watchguard AP430CR Bedienungsanleitung

Watchguard

Watchguard XTM 850 Montageanleitung

Watchguard

Watchguard XTM 25 Montageanleitung

Watchguard

Watchguard Wireless Router Bedienungsanleitung

Watchguard

Watchguard AP200 Bedienungsanleitung

Watchguard

Watchguard Firebox SOHO 6 Wireless Bedienungsanleitung

Watchguard

Watchguard XTM 2 Series Montageanleitung

Watchguard

Watchguard Firebox T10-D Bedienungsanleitung

Watchguard

Watchguard Firebox T30 Montageanleitung

Watchguard

Watchguard Firebox T15 Bedienungsanleitung

Watchguard

Watchguard Firebox M200 Bedienungsanleitung

Watchguard

Watchguard Firebox T35 Montageanleitung

Watchguard

Watchguard Firebox X10E Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise