Weider 8700 I Bedienungsanleitung

Serial Number Decal

(under the seat)

www.iconeurope.com

USER’S MANUAL

Model No. WEEVSY30810.2

Serial No.

Write the serial number in the space

above for reference.

QUESTIONS?

If you have questions, or if there are

missing parts, please contact us:

UNITED KINGDOM

Call: 08457 089 009

From Ireland: 053 92 36102

Website: www.iconsupport.eu

E-mail: [email protected]

Write:

ICON Health & Fitness, Ltd.

c/o HI Group PLC

Express Way

CASTLEFORD

WF10 5QJ

UNITED KINGDOM

AUSTRALIA

Call: 1800 993 770

E-mail: [email protected]

Write:

ICON Health & Fitness

PO Box 635

WINSTON HILLS NSW 2153

AUSTRALIA

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Keep this manual

for future reference.

WARNING DECAL PLACEMENT

TABLE OF CONTENTS

This drawing shows the location(s) of the warning

decal(s). If a decal is missing or illegible, see

the front cover of this manual and request a

free replacement decal. Apply the decal in the

location shown. Note: The decal(s) may not be

shown at actual size.

WEIDER is a registered trademark of ICON IP, Inc.

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT PRECAUTIONS..................................................................3

BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

ADJUSTMENT ............................................................................21

WEIGHT RESISTANCE CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

CABLE DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

MAINTENANCE ...........................................................................25

EXERCISE GUIDELINES ....................................................................26

PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

ORDERING REPLACEMENT PARTS .................................................. Back Cover

RECYCLING INFORMATION ......................................................... Back Cover

IMPORTANT PRECAUTIONS

1. Before beginning any exercise program,

consult your physician. This is especially

important for persons over age 35 or per-

sons with pre-existing health problems.

2. Use the weight system only as described in

this manual.

3. It is the responsibility of the owner to ensure

that all users of the weight system are

adequately informed of all precautions.

4. The weight system is intended for home use

only. Do not use the weight system in a com-

mercial, rental, or institutional setting.

5. Use the weight system only on a level sur-

face. Cover the floor beneath the weight

system to protect the floor.

6. Inspect and properly tighten all parts regu-

larly. Replace any worn parts immediately.

7. Keep children under age 12 and pets away

from the weight system at all times.

8. The weight system should not be used by

persons weighing more than 300 lbs.

(136 kg).

9. Wear appropriate exercise clothes while

exercising; do not wear loose clothes

that could become caught on the weight

system. Always wear athletic shoes for foot

protection.

10. Keep hands and feet away from moving

parts.

11. Always secure the weight stack with the lock

pin and the lock after exercising to prevent

unauthorized use of the weight system (see

LOCKING THE WEIGHT STACK on page 23).

12. Make sure that the cables remain on the pul-

leys at all times. If the cables bind while you

are exercising, stop immediately and make

sure that the cables are on the pulleys.

13. Always stand on the foot plate when per-

forming an exercise that could cause the

weight system to tip.

14. Never release the arms, leg lever, lat bar, or

handle strap while weights are raised. The

weights will fall with great force.

15. Always disconnect the lat bar from the

weight system when performing an exercise

that does not require the lat bar.

16. Over exercising may result in serious injury

or death. If you feel faint or if you experience

pain while exercising, stop immediately and

cool down.

WARNING: To reduce the risk of serious injury, read all important precautions and

instructions in this manual and all warnings on your weight system before using your weight

system. ICON assumes no responsibility for personal injury or property damage sustained by or

through the use of this product.

Height: 6 ft. 11 in. (211 cm)

Width: 3 ft. 7 in. (109 cm)

Depth: 6 ft. 5 in. (196 cm)

Shroud

High Pulley Station

Low Pulley Station

Right Side

Left Side

Backrest

Weight

Weight Pin

Leg Lever

Foot Plate

Seat

Arm

Arm Pin

BEFORE YOU BEGIN

Thank you for selecting the versatile WEIDER®8700

I weight system. The weight system offers a selection

of weight stations designed to develop every major

muscle group of the body. Whether your goal is to tone

your body, build dramatic muscle size and strength, or

improve your cardiovascular system, the weight system

will help you to achieve the specic results you want.

For your benet, read this manual carefully before

using the weight system. If you have questions after

reading this manual, please see the front cover of this

manual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please review the drawing

below and familiarize yourself with the parts that are

labeled.

Curl Pad

Note: The terms “right side” and “left side” are used relative to a person sitting on the seat; they

do not correspond to right and left on the drawings in this manual.

M6 Washer (82)

M8 Locknut (58)

M8 Washer (59)

M10 Locknut (56)

M4 Washer

(33)

M10 x 77mm Bolt (79)

M10 x 46mm Bolt (81)

M10 x 67mm Bolt (71)

M8 x 65mm Bolt (68)

M8 x 22mm

Shoulder Bolt (65)

M6 x 32mm Screw (64)

M6 x 38mm Screw (95)

M6 x 16mm

Screw (62)

M4 x 20mm

Self-tapping Screw (69)

M10 x 51mm Bolt (66)

M10 Washer (57)

M4 x 12mm

Screw (78)

Large Washer (85)

M8 x 63mm Carriage Bolt (87)

M4.2 x 16mm

Self-tapping Screw (49)

M10 x 86mm Carriage Bolt (67)

M10 x 25mm

Button Screw (77)

M10 x 130mm Bolt (72)

M10 x 25mm Screw (74)

M10 x 64mm Bolt Set (76)

M10 x 63mm Bolt (75)

11mm Spacer

(86)

13mm Spacer

(52)

M12 Nut (84)

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each

drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the

key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it

has been preassembled. Extra parts may be included.

The Four Stages of the Assembly Process

Frame Assembly—You will begin by assembling

the base and the uprights that form the skeleton of

the weight system.

Arm Assembly—During this stage you will

assemble the arms and the leg lever.

Cable Assembly—During this stage you will attach

the cables and pulleys that connect the arms to the

weights.

Seat Assembly—During the final stage you will

assemble the seat and the backrest.

• Assembly requires two persons.

• Because of its weight and size, assemble the

weight system in the location where it will be

used. Make sure that there is enough clearance

to walk around the weight system.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until you complete all assembly steps.

• To identify small parts, see page 5.

• In addition to the included tool(s), assembly

requires the following tools:

one Phillips screwdriver

one standard screwdriver

one rubber mallet

two adjustable wrenches

Assembly may be easier if you have a set of

wrenches. To avoid damaging parts, do not use

power tools.

ASSEMBLY

Attach the Foot Plate (38) to the Base (1) with

an M10 x 130mm Bolt (72) and an M10 Locknut

(56). Do not overtighten the Locknut; the Foot

Plate must pivot easily.

2. Attach the Weight Guides (21) and the Base

(1) to the Stabilizer (2) with two M10 x 67mm

Bolts (71), two M10 Washers (57), and two M10

Locknuts (56). Do not tighten the Locknuts

yet.

To make assembly easier, read the

information on page 6 before you begin.

Frame Assembly

4. Attach the Front Leg (7) to the Base (1) with

two M8 x 63mm Carriage Bolts (87) and two M8

Locknuts (58). Do not tighten the Locknuts

yet.

3. Attach the Upright (3) to the Base (1) with two

M8 x 63mm Carriage Bolts (87) and two M8

Locknuts (58). Do not tighten the Locknuts

yet.

6. Slide the two Weight Bumpers (27) onto the

Weight Guides (21).

Orient nine Weights (22) so that the pin holes

are on the bottom as shown. Slide the Weights

onto the Weight Guides (21).

Insert the Weight Selector (24) into the nine

Weights (22). Make sure that the pin on the

Weight Selector is oriented as shown.

Apply some of the included grease inside the

indicated holes in the remaining Weight (22).

Then, slide the Weight onto the Weight

Guides (21).

5. Attach the Seat Tube (6) to the Upright (3) with

two M8 x 65mm Bolts (68), two M8 Washers

(59), and two M8 Locknuts (58). Do not tighten

the Locknuts yet.

Attach the Seat Tube (6) to the Front Leg (7)

in the same way.

Pin Hole

Grease

8. Attach the Leg Bumper (60) to the Front Leg (7)

with an M4 x 20mm Self-tapping Screw (69) and

an M4 Washer (33). Make sure that the end of

the Leg Bumper is pointing upward.

9. Apply grease to an M10 x 64mm Bolt Set (76).

Attach the Leg Lever (8) to the Front Leg (7) with

the M10 x 64mm Bolt Set (76). Make sure that

the barrel of the Bolt Set is inserted through

both sides of the bracket on the Front Leg.

7. Attach the Top Frame (4) to the Upright (3) with

two M10 x 67mm Bolts (71), two M10 Washers

(57), and two M10 Locknuts (56). Do not tighten

the Locknuts yet.

Attach the Top Frame (4) to the Weight Guides

(21) with two M10 x 25mm Screws (74). Do not

tighten the Screws yet.

See steps 2 to 7. Tighten the M10 Locknuts (56)

and the M8 Locknuts (58).

Grease

Andere Handbücher für 8700 I

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weider Heim-Fitnessstudio Handbücher

Weider

Weider Body Works Pro 2.0 Bench Kurzanleitung

Weider

Weider 355 Bedienungsanleitung

Weider

Weider WESY81080 Bedienungsanleitung

Weider

Weider Pro 300 Bedienungsanleitung

Weider

Weider C132 Bench Bedienungsanleitung

Weider

Weider 390 L Bedienungsanleitung

Weider

Weider Club 290 Power Tower Bench Bedienungsanleitung

Weider

Weider 4990 I Kurzanleitung

Weider

Weider Muscle 1352 Bench Bedienungsanleitung

Weider

Weider 184 Bench Bedienungs- und Wartungshandbuch

Weider

Weider Pro 255 L Bench Bedienungsanleitung

Weider

Weider Pro 125 Bench Systemhandbuch

Weider

Weider WEBE96490 Bedienungsanleitung

Weider

Weider 831.150302 Bedienungsanleitung

Weider

Weider 831.153972 Bedienungsanleitung

Weider

Weider B160 Bench Bedienungsanleitung

Weider

Weider 8700 I Bedienungsanleitung

Weider

Weider E9000A Bedienungsanleitung

Weider

Weider 9600 PRO Bedienungsanleitung

Weider

Weider Powerguide Home Gym Sy X2s Bedienungsanleitung

Weider

Weider 114-2 Bedienungsanleitung

Weider

Weider WEBE07790 Bedienungsanleitung

Weider

Weider Pro 450 Bedienungsanleitung

Weider

Weider Pro 318 Bedienungsanleitung

Beliebte Heim-Fitnessstudio Handbücher anderer Marken

Horizon Fitness

Horizon Fitness OXFORD 6 Bedienungsanleitung

Energetics

Energetics Multi Trainer 5.1 Bedienungsanleitung

Matrix

Matrix MG-PL Series Bedienungsanleitung

Reebok

Reebok Tbr2i Bedienungs- und Wartungshandbuch

Pure Fitness

Pure Fitness 8526HE Bedienungsanleitung

Bowflex

Bowflex Sport 001-6961 Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Kurzanleitung

Body Solid

Body Solid GHYP-345 Bedienungsanleitung

Evo

Evo TAHOE 5105 Bedienungsanleitung

ParaBody

ParaBody 40 Bedienungsanleitung

JLL

JLL Ventus Pro Air Power Bedienungsanleitung

Trojan

Trojan Colorado 370 Bedienungsanleitung

Octane Fitness

Octane Fitness xRide xR650 Bedienungsanleitung

Precor

Precor Discovery Series Bedienungsanleitung

Insportline

Insportline RW600 Bedienungsanleitung

Stamina

Stamina 55-1532 Bedienungsanleitung

Tunturi

Tunturi R25 Bedienungsanleitung

CYBEX

CYBEX Jungle Gym 17000 Bedienungsanleitung