WeldCraft TTG Plus Bedienungsanleitung

ESPAÑOL

OM-230 915D

2010−04

ENGLISH

File: TIG (GTAW)

Owner’s Manual

Manuel de L’utilisateur

Manual del Operador

Description

TIG (GTAW) Welding

Tungsten Grinder

Triad Tungsten Grinder

TTG Plus

FRANÇAIS

TABLE OF CONTENTS

SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-1. Symbol Usage 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-2. Tungsten Grinding Hazards 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-3. California Proposition 65 Warnings 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-4. Principal Safety Standards 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SECTION 2 − DEFINITIONS 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-1. Manufacturer’s Rating Label For CE Products 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-2. Symbols And Definitions 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SECTION 3 − SPECIFICATIONS 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-1. Description 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-2. Included With Your Unit 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-3. Specifications 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SECTION 4 − INSTALLATION 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-1. Connecting Input Power 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-2. Connecting Grinder To Exhaust (Vacuum) Hose 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SECTION 5 − OPERATION 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5-1. Grinder Components 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5-2. Grinding And Cutting Electrodes 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5-3. Replacing Grinding Wheels 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5-4. Installing Optional Double-Decker Kit 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5-5. Installing Grinder Mounting Bracket 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SECTION 6 − MAINTENANCE & TROUBLESHOOTING 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6-1. Routine Maintenance 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6-2. Troubleshooting 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SECTION 7 − PARTS LIST 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

OM-230 915 Page 1

SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING

Tung_Grind 2010−03

Protect yourself and others from injury — read and follow these precautions.

1-1. Symbol Usage

DANGER! − Indicates a hazardous situation which, if

not avoided, will result in death or serious injury. The

possible hazards are shown in the adjoining symbols

or explained in the text.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury. The possible

hazards are shown in the adjoining symbols or ex-

plainedin the text.

NOTICE − Indicates statements not related to personal injury.

Indicates special instructions.

This group of symbols means Warning! Watch Out! ELECTRIC

SHOCK, MOVING PARTS, and HOT PARTS hazards. Consult sym-

bols and related instructions below for necessary actions to avoid the

hazards.

1-2. Tungsten Grinding Hazards

The symbols shown below are used throughout this manual

to call attention to and identify possible hazards. When you

see the symbol, watch out, and follow the related instructions

to avoid the hazard. The safety information given below is

only a summary of the more complete safety information

found in the Safety Standards listed in Section 1-4. Read and

follow all Safety Standards.

Only qualified persons should install, operate, maintain, and

repair this unit.

During operation, keep everybody, especially children, away.

ELECTRIC SHOCK can kill.

Touchinglive electrical parts can cause fatal shocks

or severe burns. The input power circuit and

machineinternal circuits are also live when power is

on. Incorrectly installed or improperly grounded

equipmentis a hazard.

Do not touch live electrical parts.

Wear dry, hole-free insulating gloves and body protection.

Disconnect input power before installing or servicing this

equipment.

Properly install this equipment according to its Owner’s Manual

and national, state, and local codes.

Frequently inspect input power cord for damage or bare wiring −

replace cord immediately if damaged − bare wiring can kill.

Turn off all equipment when not in use.

Use only well-maintained equipment. Repair or replace damaged

parts at once. Maintain unit according to manual.

Keep all panels and covers securely in place.

Grinding produces dust. Breathing this dust can be

hazardous to your health.

GRINDING DUST can be hazardous.

Do not breathe the dust.

Use local exhaust (forced ventilation) to remove dust or wear an

approved respirator.

Grinding dust from thoriated electrodes contains low-level radio-

active material. Consider using tungsten containing ceria,

lanthana,or yttria instead of thoria.

Properly dispose of grinder dust in an environmentally safe way.

Read and understand the Material Safety Data Sheets (MSDSs)

and the manufacturer’s instructions for metals and consumables.

GRINDINGcan cause FIRE OR EXPLOSION.

Do not grind where flying sparks can strike

flammablematerial.

Protect yourself and others from flying sparks

and hot metal.

Be alert that sparks and hot materials from grinding can easily go

throughsmall cracks and openings to adjacent areas.

Watch for fire, and keep a fire extinguisher nearby.

FLYING SPARKS can injure.

Wear a face shield to protect eyes and face.

Shape tungsten electrode only on grinder with

properguards in a safe location wearing proper

face, hand, and body protection.

Sparks can cause fires — keep flammables away.

HOT PARTS can burn.

Do not touch hot parts bare handed.

Allow cooling period before working on equip-

ment.

To handle hot parts, use proper tools and/or

wear heavy, insulated welding gloves and

clothingto prevent burns.

OVERUSE can cause OVERHEATING

Allow cooling period; follow rated duty cycle.

Keepair holes free of dust; clean if necessary.

READ INSTRUCTIONS.

Read and follow all labels and the Owner’s

Manualcarefully before installing, operating, or

servicing unit. Read the safety information at

the beginning of the manual and in each

section.

Use only genuine replacement parts from the manufacturer.

Perform maintenance and service according to the Owner’s

Manuals, industry standards, and national, state, and local

codes.

OM-230 915 Page 2

MOVING PARTS can injure.

Keep away from moving parts.

Keep all doors, panels, covers, and guards

closed and securely in place.

Have only qualified persons remove doors, panels, covers, or

guards for maintenance and troubleshooting as necessary.

Reinstall doors, panels, covers, or guards when maintenance is

finishedand before reconnecting input power.

1-3. California Proposition 65 Warnings

Welding or cutting equipment produces fumes or gases

which contain chemicals known to the State of California to

cause birth defects and, in some cases, cancer. (California

Health & Safety Code Section 25249.5 et seq.)

This product contains chemicals, including lead, known to

the state of California to cause cancer, birth defects, or other

reproductiveharm. Wash hands after use.

1-4. Principal Safety Standards

SafePractice For Occupational And Educational Eye And Face Protec-

tion,ANSI Standard Z87.1, from American National Standards Institute,

25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, web-

site: www.ansi.org).

SafetyinWelding, Cutting, and Allied Processes, ANSI Standard Z49.1,

from Global Engineering Documents (phone: 1-877-413-5184, website:

www.global.ihs.com).

Safe Practices for the Preparation of Containers and Piping for Welding

and Cutting, American Welding Society Standard AWS F4.1, from Glob-

al Engineering Documents (phone: 1-877-413-5184, website:

www.global.ihs.com).

NationalElectrical Code, NFPA Standard 70, from National Fire Protec-

tion Association, Quincy, MA 02269 (phone: 1-800-344-3555, website:

www.nfpa.organd www. sparky.org).

SafeHandling of Compressed Gases in Cylinders, CGA Pamphlet P-1,

from Compressed Gas Association, 4221 Walney Road, 5th Floor,

Chantilly,VA 20151 (phone: 703-788-2700, website:www.cganet.com).

Safety in Welding, Cutting, and Allied Processes, CSA Standard

W117.2,from Canadian Standards Association, Standards Sales, 5060

Spectrum Way, Suite 100, Ontario, Canada L4W 5NS (phone:

800-463-6727,website: www.csa-international.org).

SafePractice For Occupational And Educational Eye And Face Protec-

tion,ANSI Standard Z87.1, from American National Standards Institute,

25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, web-

site: www.ansi.org).

Standardfor Fire Prevention During Welding, Cutting, and Other Hot

Work, NFPA Standard 51B, from National Fire Protection Association,

Quincy, MA 02269 (phone: 1-800-344-3555, website: www.nfpa.org.

OSHA, Occupational Safety and Health Standards for General Indus-

try, Title 29, Code of Federal Regulations (CFR), Part 1910, Subpart Q,

and Part 1926, Subpart J, from U.S. Government Printing Office, Super-

intendentof Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954

(phone: 1-866-512-1800) (there are 10 OSHA Regional Offices—

phone for Region 5, Chicago, is 312-353-2220, website:

www.osha.gov).

About Implanted Medical Devices:

ImplantedMedical Device wearers should consult their doctor and the

device manufacturer before performing or going near arc welding, spot

welding,gouging, plasma arc cutting, or induction heating operations.

If cleared by your doctor, then following the above procedures is recom-

mended.

ENGLISH

OM-230 915 Page 3

SECTION 2 − DEFINITIONS

2-1. Manufacturer’s Rating Label For CE Products

2-2. Symbols And Definitions

Some symbols are found only on CE products.

Output Alternating Current AAmperes VVolts

Single Phase Line Connection

Hertz Read Instructions

Double Insulated Recycle

OM-230 915 Page 4

SECTION 3 − SPECIFICATIONS

3-1. Description

The TTG Plus cuts, grinds, and faces tungsten electrodes used in the TIG (GTAW) welding process. Additional fea-

tures and benefits of this unit are:

•Electrodes are sharpened to conform to recognized standards.

•The replaceable grinding wheel is diamond-coated on both sides.

•The grinding wheel has an offset edge for easy cutting − an industry exclusive!

•The head assembly allows for different electrode angles and diameters.

•The unit can be hand operated, or bench-mounted using the supplied mounting bracket.

Grinding the tungsten electrode produces dust and flying sparks which can cause injury and start fires. Use local exhaust (forced

ventilation) at the grinder or wear an approved respirator.

Read MSDS for safety information. Consider using tungsten containing ceria, lanthana, or yttria instead of thoria. Grinding dust from

thoriatedelectrodes contains low-level radioactive material. Properly dispose of grinder dust in an environmentally safe way. Wear

proper face, hand, and body protection. Keep flammables away.

3-2. Included With Your Unit

1 TTG Plus Tungsten Grinder

With Diamond Grinding Wheel

2 Steel Carrying Case

3 Electrode Holder With

Clamping Collet

4 Torx Screwdriver

5 Mounting Bracket

804 716 / Ref 804 762

3-3. Specifications

Dimensions Weight Input Power Power-On Time Cord

Length Rotary

Speed

2.6 x 13.8 in.(65 x 250

mm) 3 lb (1.4 kg)

(w/Grinding Wheel)

110 V AC

50/60 Hz

(500 watt Rating) 100% 9.8 ft

(3 m) 30,000

RPM

(U/min)

Noise

Rating Vibration

Level Electrode

Material Electrode Angles Electrode Diameters

83 dBa

(per EN23741) 2.5 m/s2

(per EN28662, Part 1)

Tungsten electrodes alloyed with

zirconium, lanthanum, yttrium,

and cerium

Consultcountry-specific reg-

ulations for electrodes con-

tainingThorium.

15°

18°

22.5°

30°

0.04 in.(1 mm)

1/16 in.(1.6 mm)

3/32 in.(2.4 mm)

1/8 in.(3.2 mm)

5/32 in. (4 mm)

ENGLISH

OM-230 915 Page 5

SECTION 4 − INSTALLATION

Operation

4-1. Connecting Input Power

804 717

1 RatingLabel

2 Power Cord

3 110 Volt AC Plug

4 AC Receptacle

Connect plug to matching AC re-

ceptacle.See rating label for elec-

trical specifications.

4-2. Connecting Grinder To Exhaust (Vacuum) Hose

804 811

!Grinding the tungsten elec-

trode produces dust and fly-

ing sparks which can cause

injury and start fires. Use lo-

cal exhaust (forced ventila-

tion) at the grinder or wear an

approvedrespirator.

Read MSDS for safety infor-

mation. Consider using

tungsten containing ceria,

lanthana,or yttria instead of

thoria. Grinding dust from

thoriated electrodes con-

tains low-level radioactive

material. Properly dispose

of grinder dust in an environ-

mentally safe way. Wear

proper face, hand, and body

protection.Keep flammables

away.

1 Grinder

2 Exhaust (Vacuum) System

The grinding head is designed to

accept a 1−1/4 in. (32 mm) exhaust

(vacuum) hose.

Connect the grinder to the exhaust

(vacuum) hose as shown.

The optional protective cover/

adapter can also be used to con-

nect the exhaust (vacuum) hose to

the grinder.

OM-230 915 Page 6

SECTION 5 − OPERATION

Operation

5-1. Grinder Components

804 718

1 On/Off Switch

2 Identification Label

3 Grinding Head

4 Tungsten Sharpening Angle

5 Tungsten Sharpening

Diameters

6 Tungsten Sharpening Holes

7 Tungsten Surface Grinding

Holes

8 Tungsten Cutting Slot

ENGLISH

OM-230 915 Page 7

5-2. Grinding And Cutting Electrodes

804 719

!Grinding the tungsten electrode

producesdust and flying sparks

which can cause injury and start

fires. Use local exhaust (forced

ventilation)at the grinder or wear

an approved respirator.

Read MSDS for safety informa-

tion. Consider using tungsten

containingceria, lanthana, or yt-

tria instead of thoria. Grinding

dust from thoriated electrodes

contains low-level radioactive

material. Properly dispose of

grinder dust in an environmen-

tally safe way. Wear proper face,

hand, and body protection. Keep

flammablesaway.

Do not exert excessive pressure on

the grinding wheel or the life of the

wheel will be shortened.

Use a rough grinding wheel to

sharpenlarge electrodes.

Wait until grinding wheel stops be-

fore restarting grinder.

1 Tungsten Electrode

To Sharpen Electrode:

Determine diameter of electrode and

desiredsharpening angle.

Turn on grinder. Insert electrode in cor-

respondinghole in grinder.

Slowly turn the electrode until tip is

sharpenedevenly. If the electrode is not

turned the tip will be flat ground to the

selectedangle.

To Face Grind Electrode:

Determine diameter of electrode.

Turn on grinder. Insert electrode in cor-

responding hole at front of grinding

head. Grind the electrode tip until

square.

To Cut Electrode To Length:

(For Orbital Or Manual Welding):

2 Cutting Slot

Turn on grinder. Insert electrode in cut-

ting slot and turn electrode slowly until

cut.

An optional cutting device is avail-

ablefor larger electrodes. See Sec-

tion 7.

Turn grinder off.

Sharpening Electrode

Face Grinding Electrode

Cutting Electrode To Length

OM-230 915 Page 8

5-3. Replacing Grinding Wheels

804 720

!Turn off grinder and disconnect

power cord.

1 Head Screw

2 Head

3 Head Nut

4 1/8 in. (3 mm) rod

5 Grinding Wheel

6 Grinding Wheel Screw

Use Torx screwdriver to remove head

screw. Remove head. Do not remove

headnut.

Slide rod through cross hole and motor

shaft to prevent rotation of the grinding

wheel.

Removegrinding wheel screw. Remove

grinding wheel. Reverse or replace

grindingwheel.

To ensure correct installation, align

grindingwheel pilot hole with loca-

tor pin on shaft.

Reinstall grinding wheel screw and

washer, head, and head screw. Re-

move rod.

Tools Needed:

Torx

1/8 in.(3 mm) Diameter Rod

Andere Handbücher für TTG Plus

Inhaltsverzeichnis

Sprachen:

Andere WeldCraft Schleifer Handbücher

WeldCraft

WeldCraft TTG Plus Bedienungsanleitung

Beliebte Schleifer Handbücher anderer Marken

Parkside

Parkside PWS 230 C3 Bedienungsanleitung

SUHNER ABRASIVE

SUHNER ABRASIVE ASC 9 Technisches Handbuch

PTA

PTA P1322 Bedienungsanleitung

Crown

Crown CT13313 Bedienungsanleitung

Parkside

Parkside 280250 Bedienungsanleitung

Climax

Climax VM2150 Series Bedienungsanleitung

Jet

Jet JPSG-618M1 Service-Handbuch

Makita

Makita GA4030 Bedienungsanleitung

DeWalt

DeWalt DWEN202 Bedienungsanleitung

Grizzly

Grizzly G2790 Bedienungsanleitung

Fein

Fein MSf843-1a Bedienungsanleitung

Bosch

Bosch GWS 14,4 V PROFESSIONAL Bedienungsanleitung

RAMSET

RAMSET CBAGR18 Bedienungsanleitung

Bosch

Bosch 8-115 Z Bedienungsanleitung

STEELE PRODUCTS

STEELE PRODUCTS SP-PB008 Bedienungsanleitung

MW TOOLS

MW TOOLS ME15W Bedienungsanleitung

Caravaggi

Caravaggi SP 20 Betriebsanleitung

SUHNER ABRASIVE

SUHNER ABRASIVE UWK 10-R125 Technisches Handbuch