Westermo Lynx DSS L108 Bedienungsanleitung

©Westermo Teleindustri AB

www.westermo.com

User Guide

6643-2220

Industrial Ethernet

8-port Device Server Switch

Lynx DSS

L108 / L208-F2G-S2

WeOS

26643-2220

Safety

Warning

Do not open connected unit. Hazardous voltage may occur within this unit when

connected to power supply.

Note that this unit can be connected to two different power sources.

When this unit is operated at an ambient temperature above +55°C (+131°F), the

External Surface of Equipment may exceed Touch Temperature Limit according to

EN/IEC/UL 60950-1.

To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line

cord.

For more information see General safety 100-5001.

License Information

This device contains public available software which is under the GPL license.

For more information see legal.pdf included with all firmware releases.

This product includes software developed by the OpenSSL Project for use in the

OpenSSL Toolkit. http://www.openssl.org

Legal information

The contents of this document are provided “as is”. Except as required by applicable

law, no warranties of any kind, either express or implied, including, but not limited to,

the implied warranties of merchantability and fitness for a particular purpose, are made

in relation to the accuracy and reliability or contents of this document. Westermo

reserves the right to revise this document or withdraw it at any time without prior

notice.

Under no circumstances shall Westermo be responsible for any loss of data or income

or any special, incidental, and consequential or indirect damages howsoever caused.

More information about Westermo can be found at the following Internet address:

http://www.westermo.com

Software tools

Related software tools are available in the folder software tools under

technical support on the Westermo website.

6643-2220

Maintenance

No maintenance is required, as long as the unit is used as intended within the specified

conditions.

Agency approvals and standards compliance

Type Approval / Compliance

EMC EN 61000-6-1, Immunity residential environments

EN 61000-6-2, Immunity industrial environments

EN 61000-6-3, Emission residential environments

EN 61000-6-4, Emission industrial environments

EN 55022 +A1, Emission IT equipment

EN 55024 +A1 + A2, Immunity IT equipment

FCC part 15 Class B

EN 50121-4, Railway signalling and telecommunications apparatus

IEC 62236-4, Railway signalling and telecommunications apparatus

Safety UL/IEC/EN 60950-1, IT equipment

Marine DNV Standard for Certification no. 2.4

FCC Part 15.105

Notice:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

… Reorient or relocate the receiving antenna

… Increase the separation between the equipment and receiver

… Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected

… Consult the dealer or an experienced radio/TV technician for help.

Corrosive

environment

Notice:

This product has been successfully tested in a corrosion test according to IEC 60068-

2-60, method 3. This means that the product meets the requirements to be placed in an

environment classified as ISA-S71.04 class G3.

Note! If the product is placed in a corrosive environment, it is important that all unused

connector sockets are protected with a suitable plug in order to avoid corrosion attacks

on the gold plated pins in connectors.

46643-2220

Declaration of Conformity

Westermo Teleindustri AB

Declaration of conformity

Org.nr/

Postadress/Postal address

Tel.

Telefax

Postgiro

Bankgiro

Corp. identity number

Registered office

S-640 40 Stora Sundby 016-428000 016-428001 52 72 79-4 5671-5550 556361-2604 Eskilstuna

Sweden Int+46 16428000 Int+46 16428001

The manufacturer

Westermo Teleindustri AB

SE-640 40 Stora Sundby, Sweden

Herewith declares that the product(s)

Type of product Model

Ethernet device server switch Lynx DSS L*08-F2G-S2*

is in conformity with the following EC directive(s).

No Short name

2004/108/EC Electromagnetic Compatibility (EMC)

2011/65/EU Restriction of the use of certain hazardous substances in electrical and

electronic equipment (RoHS)

References of standards applied for this EC declaration of conformity.

No Title Issue

EN 61000-6-1 Electromagnetic compatibility – Immunity for residential

environments

2007

EN 61000-6-2 Electromagnetic compatibility – Immunity for industrial

environments

2005

EN 61000-6-3 Electromagnetic compatibility – Emission for residential

environments

2007

EN 61000-6-4 Electromagnetic compatibility – Emission for industrial

environments

2007

EN 55024 Information technology equipment - Immunity 1998

+A1:2001

+A2:2003

EN 55022 Information technology equipment - Emission 2006

+A1:2007

EN 50121-4 Railway applications - Electromagnetic compatibility

Emission and immunity of the signalling and

telecommunications apparatus

2006

The last two digits of the year in which the CE marking was affixed: 13

Pierre Öberg

Technical Manager

Mars 2013

The first “*” in the model name can be any alphanumeric character, indicating software version. The second “*” in the

model name can be any alphanumeric characters indicating customer specific models, or blank.

6643-2220

Product description

Status Active

Ports 6 x RJ-45, 10/100BaseT.

4 x SFP, 100/1000 Mbit/s.

2 x RJ-45, RS-232/422/485.

Description Managed Device Server Switch with routing functionality

Warranty period 5 years

Approvals

Marine DNV Standard for Certification no. 2.4

EMC (Electromagnetic Compatibility)

EN 61000-6-1 Immunity residential environments

EN 61000-6-2 Immunity industrial environments

EN 61000-6-3 Emission residential environments

EN 61000-6-4 Emission industrial environments

EN 55022 +A1 Emission IT equipment

EN 55024 + A1 + A2 Immunity IT equipment

FCC part 15 Class B

EN 50121-4 Railway signalling and telecommunications apparatus

IEC 62236-4 Railway signalling and telecommunications apparatus

EMC specifications

EN 61000-4-2,

ESD

Contact: ±6 kV

Air: ±8 kV

EN 61000-4-4,

fast transients

Power port: ±2 kV

Ethernet: ±2 kV

Status out/Digital in: ±2 kV

Serial ports: ±2 kV

Enclosure: ±2 kV

EN 61000-4-5,

surge

Power port

L-L: ±0.5 kV, 2 Ω, 18 μF

L-E: ±2 kV, 42 Ω, 0.5 μF

L-L: ±1 kV, 42 Ω, 0.5 μF

L-E: ±2 kV, 12 Ω, 9 μF

L-L: ±1 kV, 12 Ω, 9 μF

Ethernet

L-E: ±2 kV, 2Ω, 0.5 μF

Status out/Digital in

L-E: ±2 kV, 42 Ω, 0.5 μF

L-L: ±1 kV, 42 Ω, 0.5 μF

RS-232

L-E: ±2 kV, 2 Ω, 0.5 μF

RS-422/485

L-E: ±2 kV, 42 Ω, 0.5 μF

EN 61000-4-8,

power frequency magnetic field

300 A/m; 0, 16.7, 60 Hz

1000 A/m; 50 Hz

66643-2220

EN 61000-4-9,

pulsed magnetic field

300 A/m

EN 61000-4-3,

radiated RF immunity

20 V/m @ (80 – 2700) MHz

1 kHz sine, 80% AM

EN 61000-4-6,

conducted RF immunity

Power port: 10 V, 80% AM, 1 kHz; (0.15 – 80) MHz

Ethernet: 10 V, 80% AM, 1 kHz; (0.15 – 80) MHz

Status out/Digital in: 10 V, 80% AM, 1 kHz; (0.15 – 80) MHz

Serial ports: 10 V, 80% AM, 1 kHz; (0.15 – 80) MHz

Earth port: 10 V, 80% AM, 1 kHz; (0.15 – 80) MHz

EN 55022,

radiated RF emmision,

FCC Part 15/ DNV 2.4

EN 55022/FCC Part 15/DNV 2.4, Class B / DNV bridge

EN 55022,

conducted RF emmision,

EN 55022/FCC Part 15/DNV 2.4, Class B / DNV bridge

DNV 2.4,

compass safe distance

Standard compass (5.4°/H deviation) = 15 cm

Steering/standby steering/emergency compass

(18°/H deviation) = 10 cm

Safety

Safety UL/IEC/EN 60950-1, IT equipment

EN 60950-1,

dielectric strength

Power port to all other ports: 1.5 kVrms, 50 Hz, 1 min

Ethernet ports to all other ports: 1.5 kVrms, 50 Hz, 1 min

RS-232 port to all other ports: 1.5 kVrms, 50 Hz, 1 min

RS-422/485 port to all other ports: 1.5 kVrms, 50 Hz, 1 min

Reliability prediction

MTBF, operating 517 000 hours

Service life, operating 10 years

Climatic

Temperature, operating –40 to +70°C (–40 to +158°F)

Temperature, storage –50 to +85°C (–58 to +185°F)

Humidity, operating 5 to 95 % relative humidity

Humidity, storage 5 to 95 % relative humidity

Enclosure

Enclosure Fire enclosure

Dimensions (W x H x D) 52.5 x 100 x 101 mm

Weight 0.7 kg

Degree of protection IP 40

Cooling Convection

Mounting Horizontal on 35 mm DIN-rail

6643-2220

Mechanical

IEC 60068-2-6,

vibration

IEC 60068-2-6,(sine), operating

3 – 13.2 Hz: 1mm

13.2 – 100 Hz: 0.7 g

5.5 – 30 Hz: 1.5 g

30 – 50 Hz: 0.42 mm

50 – 500 Hz: 4.2 g

IEC 60068-2-64 (random), operating

5 – 20 Hz: 2 m²/s³,

20 – 2000 Hz: – 3 dB/oct

IEC-60068-2-27, shock Operating:

30 g, 11 ms

100 g, 6 ms**

IEC 60068-2-27, bump Operating:

10 g, 11 ms

Interface specifications, power

Rated voltage 24 to 48 VDC

Operating voltage 19 to 60 VDC

Rated current 250 mA (380 mA) @ 24 VDC (with 500 mA USB load)

120 mA (188 mA) @ 48 VDC (with 500 mA USB load)

Rated frequency DC

Inrush current 22.7·10-3 A²s @ 48 VDC

Startup current* 2 x Rated current

Polarity Reverse polarity protected

Redundant power input Ye s

Isolation to All other

Connection Detachable screw terminal

Connector size 0.2 – 2.5 mm² (AWG 24 – 12)

Shielded cable Not required

* External supply current capability for proper start-up

Interface specifications, 10/100BaseTX

Electrical specification IEEE std 802.3. 2005 Edition

Data rate 10 Mbit/s, 100 Mbit/s, manual or auto

Duplex Full or half, manual or auto

Circuit type TNV-1

Transmission range Up to 150 m with CAT5e cable or better*

Isolation to All other

Connection RJ-45, auto MDI/MDI-X

Cabling Shielded CAT5e or better is recommended

Conductive housing Ye s

Number of ports 4

* Refer to Safety section.

86643-2220

Interface specifications, 100/1000SFP

Optical/Electrical specification IEEE std 802.3. 2005 Edition

Data rate 100 Mbit/s or 1000 Mbit/s transceivers supported

Duplex Full or Auto, depending on transceiver

Transmission range Depending on tranceiver

Connection SFP slot holding fibre transceiver or copper transceiver

Number of ports 1 or 2

Interface specifications, RS-232

Electrical specification EIA RS-232

Data rate 300 bit/s – 115.2 kbit/s

Data format 7 or 8 data bits, Odd, even or none parity, 1 or 2 stop bits

Protocol Transparent, optimised by packing algorithm

Circuit type SELV

Transmission range 15 m / 49 ft

Isolation to All other

Connection RJ-45 according to EIA-561

Shielded cable Recommended

Conductive housing Ye s

Number of ports 1

Interface specifications, RS-422/485

Electrical specification Configurable for EIA RS-232 or EIA RS-422/485

Data rate 50 bit/s – 2 Mbit/s

Data format 7 or 8 data bits, Odd, even or none parity, 1 or 2 stop bits

(2 stop bits only when no parity is set)

Circuit type TNV-1

Transmission range Up to 1200 m / 0.74 mi, depending on data rate and cable

type

Isolation to All other

Connection RJ-45 according to EIA-561

Shielded cable Not required, but recommended in railway installations close

to the rails.*

Conductive housing Ye s

Number of ports 1

* To minimise the risk of interference, a shielded cable is recommended when the cable is located inside 3 m

boundary or the cable is longer than 30 m and inside 10 m boundary to the rails and connected to this port.

6643-2220

Interface specifications, I/O relay output

Maximum voltage / current 60 VDC / 80 mA

Connect resistance Max 30 Ω

Isolation to All other

Connection Detachable screw terminal

Connector size 0.2 – 2.5 mm² (AWG 24 – 12)

Interface specifications, I/O Digital output

Maximum volt / current 60 VDC / 2 mA

Voltage_levels Logic one: >12V

Logic zero: <1V

Isolation to All other

Connection Detachable screw terminal

Connector size 0.2 – 2.5 mm² (AWG 24 – 12)

Interface specifications, USB

Electrical specification USB 2.0 host interface

Data rate Up to 12 Mbit/s (full-speed mode)

Circuit type SELV

Maximum supply current 500 mA

Connection USB receptacle connector type A

Interface specifications, console

Electrical specification LVTTL/LVCMOS-level

Data rate 115.2 kbit/s

Data format 8 data bits, no parity, 1 stop bit, no flow control

Circuit type SELV

Connection 2.5 mm jack, use only Westermo cable 1211-2027

Accessories

Description Art no

Westermo console cable 1211-2027

RJ45 to terminal block 1200-2490

RJ45 to DB9 cable 1211-2210

SFP Transceivers

Supported transceivers

Firmware prior to 4.4.0 accepts Westermo branded

transceivers only. From 4.5.0 other transceivers are accepted with a notice and the

unit will no longer be UL approved. Temp.specifications are also depending on the

used transeivers.

Note: To comply with UL60950-1 only UL recognized SFP transceivers should be used.

Deviations

With copper transceiver 1100-0148 the specified operating temperature on Lynx

is 0 to +50ºC (32 to +122°F).

FRNT reconfiguration times can not be guaranteed with copper transceivers.

10 6643-2220

Location of interface ports and LED’s

LED Indicators (for details see page 14)

Power connection (for details see page 7 and 13)

SFP transceivers (for details see page 9)

I/O connection

(for details see page 9 and 13)

USB

Position Direction Description

No. 1 Out VBUS

No. 2 In/Out D–

No. 3 In/Out D+

No. 4 Out GND

Shield In/Out Connected to protective earth

Ethernet connection TX (4 ports)

Position Signal Direction Description

No.1 TD+ In/Out Transmitted/Received data

No. 2 TD– In/Out Transmitted/Received data

No. 3 RD+ In/Out Transmitted/Received data

No. 4 – Not Connected

No. 5 – Not Connected

No. 6 RD– In/Out Transmitted/Received data

No. 7 – Not Connected

No. 8 – Not Connected

Shield Connected to PE

RJ-45 connector (Front view)

Male Female

Pin 8

Pin 1

Pin 8

Pin 8 Pin 1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Westermo Schalten Handbücher

Westermo

Westermo Lynx DSS L206-S2-EX Bedienungsanleitung

Westermo

Westermo PSI-1010G-24V Bedienungsanleitung

Westermo

Westermo L110-F2G Bedienungsanleitung

Westermo

Westermo Viper 12A Series Bedienungsanleitung

Westermo

Westermo T200 series Bedienungsanleitung

Westermo

Westermo MRI-128-F4G-PSE Series Bedienungsanleitung

Westermo

Westermo RFIR-127-F4G-T7G-DC Bedienungsanleitung

Westermo

Westermo PMI-110-F2G Bedienungsanleitung

Westermo

Westermo Lynx DSS L108-F2G-S2 EX Bedienungsanleitung

Westermo

Westermo Viper-208-TBN Series Bedienungsanleitung

Westermo

Westermo MDI-110 Series Bedienungsanleitung

Westermo

Westermo Viper 008 Bedienungsanleitung

Westermo

Westermo Viper 12A-PoE Series Bedienungsanleitung

Westermo

Westermo Viper 108 Bedienungsanleitung

Westermo

Westermo Lynx L106-S2 Bedienungsanleitung

Westermo

Westermo Viper-12 Series Bedienungsanleitung

Westermo

Westermo Viper 12A Series Bedienungsanleitung

Westermo

Westermo Lynx L210-F2G-EX Bedienungsanleitung

Westermo

Westermo Viper TBN Series Bedienungsanleitung

Westermo

Westermo RedFox 5528 Series Bedienungsanleitung

Westermo

Westermo SD-300 Series Bedienungsanleitung

Westermo

Westermo U200 series Bedienungsanleitung

Westermo

Westermo Lynx L206-F2G Bedienungsanleitung

Westermo

Westermo RedFox 7528 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung