Western WB-100B Betriebsanleitung

WB-100B

Walk-Behind Broadcast Spreader

85101

Owner's Manual and Installation Instructions

Original Instructions

Western Products, PO Box 245038, Milwaukee, WI 53224-9538 • www.westernplows.com

July 15, 2013

Lit. No. 43577, Rev. 00

CAUTION

Read this document before operating or

servicing the spreader.

This document supersedes all editions with an earlier date.

This document is for WESTERN®WB-100B walk-behind broadcast spreaders with

serial numbers 0000 and higher.

Lit. No. 43577/43587/43597, Rev. 00 July 15, 2013

Lit. No. 43577/43587/43597, Rev. 00 3 July 15, 2013

TABLE OF CONTENTS

PREFACE..................................................................................................................................................................5

Owner's Information............................................................................................................................................5

SAFETY INFORMATION..........................................................................................................................................6

LOADING ..................................................................................................................................................................8

ASSEMBLY...............................................................................................................................................................9

Lit. No. 43577/43587/43597, Rev. 00 July 15, 2013

Lit. No. 43577, Rev. 00 5 July 15, 2013

PREFACE

This manual has been prepared to acquaint you with

the safety information, operation and maintenance

of your new walk-behind spreader. Please read this

manual carefully and follow all recommendations. This

will help ensure proﬁtable and trouble-free operation

of your spreader. Keep this manual accessible. It is a

handy reference in case minor service is required.

When service is necessary, bring your walk-behind

spreader to your distributor. They know your spreader

best and are interested in your complete satisfaction.

OWNER'S INFORMATION

Owner's Name: _______________________________________________________________________

Date Purchased: ______________________________________________________________________

Outlet Name: ______________________________________________ Phone: ___________________

Outlet Address: _______________________________________________________________________

Spreader Type (Model):________________________________ Weight: ____________________ lb/kg

Spreader Serial Number:________________________________________________________________

Lit. No. 43577/43587/43597, Rev. 00 6 July 15, 2013

SAFETY

SAFETY DEFINITIONS

NOTE: Indicates a situation or action that can lead

to damage to your spreader and vehicle or other

property. Other useful information can also be

described.

CAUTION

Indicates a potentially hazardous situation

that, if not avoided, may result in minor or

moderate injury. It may also be used to alert

against unsafe practices.

WARNING

Indicates a potentially hazardous situation

that, if not avoided, could result in death or

serious personal injury.

LABELS

Please become familiar with the labels on the

spreader.

NOTE: If labels are missing or cannot be read, see

your sales outlet.

Open/Close Label

Serial Number Label

Code Deﬁnition

MM 2-Digit Month

YY 2-Digit Year

LL 2-Digit Location Code

#### 4-Digit Sequential Number

PPPPP 5-Digit Assembly PN

Lit. No. 43577/43587/43597, Rev. 00 7 July 15, 2013

SAFETY

SAFETY PRECAUTIONS

Improper installation and operation could cause

personal injury and/or equipment and property

damage. Read and understand labels and this

Owner's Manual before installing, operating or making

adjustments.

WARNING

• Always make sure personnel are clear of

areas of danger when using equipment.

• Before working with the spreader, secure all

loose-ﬁtting clothing and unrestrained hair.

• Do not climb into or ride on spreader.

• Never attempt to lift a unit with material in it.

• Always inspect unit for defects and

replace any broken, missing or worn parts

immediately.

• Always check areas to be spread to be sure

no hazardous conditions or substances are

in the area.

CAUTION

• Do not operate a spreader in need of

maintenance.

• Before operating the spreader, reassemble

any parts or hardware removed for cleaning

or adjusting.

• Before operating the spreader, remove

materials such as cleaning rags, brushes,

and hand tools from the spreader.

• Never use wet materials or materials with

foreign debris with this spreader. This unit

is designed to handle dry, clean free-ﬂowing

material.

CAUTION

DO NOT leave unused material in

hopper. Material can freeze or solidify,

causing unit to not work properly.

Empty and clean after each use.

NOTE: Lubricate grease ﬁttings after each use.

Use a good quality multipurpose grease.

PERSONAL SAFETY

• Wear only snug-ﬁtting clothing while working on

your spreader.

• Do not wear jewelry or a necktie, and secure long

hair.

• Wear safety goggles to protect your eyes from dirt

and dust.

NOISE

Airborne noise emission during use is below 70 dB(A)

for the spreader operator.

VIBRATION

Operating spreader vibration does not exceed 2.5 m/s2

to the hand-arm or 0.5 m/s2to the whole body.

Lit. No. 43577/43587/43597, Rev. 00 8 July 15, 2013

LOADING YOUR SPREADER

Material Weights

Material Density

(lb/ft3)

Rock Salt 80–90

SPREADING TIPS

• Use care when operating spreader near

pedestrians.

• Spread ice melting materials "with the storm" to

prevent unmanageable levels of ice from building.

• For a wider pass, increase pace.

• For a heavier pass, decrease pace.

ACCESSORIES

The following accessory is available from your

distributor.

Poly Deﬂector Kit

Provides a tighter spread pattern for areas such as

sidewalks and walkways.

WARNING

Never remove spreader from vehicle with

material in it as this could cause damage to

the frame assembly.

WARNING

Do not overload spreader. Use chart below

to calculate weight of material. Weights of

material are an average for dry materials. CAUTION

DO NOT leave unused material in

hopper. Material can freeze or solidify,

causing unit to not work properly.

Empty and clean after each use.

CAUTION

Read and adhere to manufacturer's

ice-control material package

labeling including Material Safety

Data Sheet requirements.

Lit. No. 43577/43587/43597, Rev. 00 9 July 15, 2013

4. Slide the handle assembly on the legs and fasten

with two cap screws and locknuts.

ASSEMBLING YOUR SPREADER

1. Feed the control rod through the keyhole slot in

the lower bracket.

2. Move the control handle to the fully open position.

3. Insert the upper end of the control rod into the

control handle.

Cap Screw

Handle

Assembly

Locknut

Legs

ASSEMBLY

Control Rod

Control Handle

Lit. No. 43577/43587/43597, Rev. 00 10 July 15, 2013

ASSEMBLY

5. Insert the control rod end into the gate linkage and

secure with a hairpin cotter.

Control Rod

Gate Linkage

Hairpin Cotter

6. Spin the tires and make sure the spreader is

running smoothly.

7. Tighten all fasteners.

8. Place the screen inside the hopper and put the

hopper cover on.

Inhaltsverzeichnis

Andere Western Streuer Handbücher

Western

Western 1000 Bedienungsanleitung

Western

Western LOW-PRO Betriebsanleitung

Western

Western LOW-PRO 300G Betriebsanleitung

Western

Western Striker 98810 Bedienungsanleitung

Western

Western tornado Bedienungsanleitung

Western

Western tornado Bedienungsanleitung

Western

Western Drop 250 Betriebsanleitung

Western

Western 110 Bedienungsanleitung

Western

Western 78600 Bedienungsanleitung

Western

Western PRO-FLO 2 Bedienungsanleitung

Western

Western Striker 98805 Bedienungsanleitung

Western

Western Striker Series Bedienungsanleitung

Western

Western Tornado 78000-1 Bedienungsanleitung

Western

Western PRO-FLO 300W Betriebsanleitung

Western

Western PRO-FLO 2 Bedienungsanleitung

Western

Western Striker 98825 Bedienungsanleitung

Western

Western ICE BREAKER Bedienungsanleitung

Western

Western PRO-FLO Bedienungsanleitung

Western

Western PRO-FLO Bedienungsanleitung

Western

Western ICE BREAKER Hopper Spreader Bedienungsanleitung

Western

Western Tornado 78000-1 Bedienungsanleitung

Western

Western LOW-PRO 300 Betriebsanleitung

Western

Western WB-160D Betriebsanleitung

Beliebte Streuer Handbücher anderer Marken

PEQUEA

PEQUEA GT-100 Bedienungsanleitung

Herculano

Herculano H2RS9 Bedienungsanleitung

Epoke

Epoke SKE8 Bedienungsanleitung

GEA

GEA EL44 Technisches Datenblatt

Boss Snowplow

Boss Snowplow TGS 800 Bedienungsanleitung

Fisher

Fisher EMERSON 168 Series Bedienungsanleitung

Fisher

Fisher POLY-CASTER 78601 Bedienungsanleitung

TurfEx

TurfEx RS7200 Betriebsanleitung

Ferris

Ferris Pathfinder Series Bedienungsanleitung

Fayat Group

Fayat Group DYNAPAC S100 Fehlerbehebungshandbuch

Art's-Way Manufacturing

Art's-Way Manufacturing X700 Installations- und Betriebshandbuch

EASTMAN

EASTMAN CR 500 Bedienungsanleitung

Nogueira

Nogueira RoyalFlow-600 Bedienungsanleitung

Buyers

Buyers TGS05B Bedienungsanleitung

Magnum

Magnum V-BOX PV Series Beilage

Meyer's

Meyer's VB280 Bedienungsanleitung

SnowEx

SnowEx VX-4210 Bedienungsanleitung

Kramer

Kramer VM-400HDCP Bedienungsanleitung