WESTHILL BIKES LINK Bedienungsanleitung
Electric Bike User Manual
westhillbikes.com
HAVE A QUESTION? NEED HELP?
Contact us on Facebook for a quick reply.
LINK
LINK
WARRANTY
Westhill bikes are covered by a limited 3-year warranty. Aside from general cycle maintenance, any
work to the motor should be carried out by a Westhill technician or authorised dealer.
1. Warranty periods
The statutory warranty valid at the time of
delivery applies to:
Frame: 3 years
Motor: 2 years
Battery, Charger & Controller: 2 years
2. Warranty conditions
2.1 Requirements
There is a defect in materials or workmanship or
an error of information.
The cause of the change in the product is
neither natural nor related to its functions, wear
and tear or ageing.
The damage was not caused by use of the bike
for other than the intended purpose.
2.2 Warranty exclusions
Damage caused by improper use or force
majeure.
All parts subject to function-related wear and
tear, unless this is the result of a defect in the
manufacturing process or material.
Damage which results from improper or
replacement of parts by persons other than
trained professionals.
Accidental damage or other external effects,
provided these are not the result of defective
products or information.
Repairs resulting from the use of second-hand
parts or damage caused by this use.
Damage resulting from competitive use.
Observing the required service intervals is also
a condition of any warranty claims you may
make.
2.3 The following are considered wear
parts under the statutory warranty:
Tyres
Rims in combination with rim brakes
Spokes
Brake pads
Chains and toothed belts
Chain wheels, sprockets, bottom brackets and
jockey wheels
Sliding bearings
Lamps for lighting system
Handlebar tape/handle grips
Hydraulic oils and lubricants
Gear-shift cables and brake cables
Batteries (depletion of capacity to 60% is
(2) Circumstances outside our control
FW3 Ltd shall not be liable for any failure
in service as a result of FW3 Ltd, or FW3
Ltd agents employees or contractors being
performance of its obligations by reason of any
circumstances beyond its reasonable control.
Such circumstances include, but are not limited
(3) Disclaimers
FW3 Ltd shall not be liable for any indirect,
incidental, special or consequential damages
losses or expenses (including without limitation
reputation or lost business) arising directly or
indirectly, from the purchase use or sale of the
Product, whether or not FW3 Ltd was advised or
aware of the possibility of such damages, losses
or expenses. It is the customer’s responsibility
to make lawful use of the products FW3 Ltd
supplies.
fb.com/westhillbikes | westhillbikes.com
In this warranty the following terms shall have
the following meanings: Westhill Bikes shall
mean FW3 Ltd; Westhill Product shall mean
FW3 Ltd; Product Warranty Period shall mean
mean a period commencing on the original
date of purchase as new
the
delayed, prevented or hindered in the
3
THIS MANUAL SHOULD BE CONSIDERED A PERMANENT PART OF THE
ELECTRIC BICYCLE AND SHOULD REMAIN IF IT IS RESOLD.
DEFAULT DISPLAY PASSWORD: 0657
fb.com/westhillbikes | westhillbikes.com
3
TABLE OF CONTENTS
BOX CONTENT
1 x Westhill Link
1 x Charger
1 x Manual
3
4
4
5
5
6
7
7
8
8
8
9
9
20
21
21
9
8
8
7
5
4
3
1 BOX CONTENT
2 ATTENTION
3 CHECK BEFORE USE
4 MAINTENANCE
5 BIKE DIAGRAM AND PART NAMES
6 SPECIFICATIONS
7 HOW TO UNFOLD YOUR BIKE
8 TURNING ON YOUR BATTERY
9 REMOVING OR INSERTING YOUR BATTERY
10 CHARGING THE BATTERY
11 LIGHTS ON/OFF
12 BASIC INFORMATION
13 DISPLAY MANUAL
14 GENERAL INFORMATION
15 SAFETY WARNING
fb.com/westhillbikes | westhillbikes.com
4
Max load: 120KG
ATTENTION
• Do not operate this electric bike without fully reading and understanding its
operation and limitations.
• Before riding each time ensure that all parts are in good order. If you have any
questions or concerns, please contact us via Facebook chat or by email.
• Ensure you observe traffic rules and regulations when using this electric bike.
• Passengers cannot be carried.
• When riding in rain, snow or slippery conditions reduce your speed and increase
the distance between yourself and other vehicles.
• We advise against performing maintenance operations that involve removing
parts or components. If this is necessary, please contact us for guidance.
• Do not ride through deep puddles. Water could enter the hub motor, causing
short circuits and irreparable damage.
• Do not allow individuals who are unfamiliar with the features and functions
of this e-bike to operate it without proper instruction.
• Do not modify the e-bike by yourself.
CHECK BEFORE USE
• Is the tyre pressure [45-70 PSI] correct?
• Are the brakes working correctly?
• Are the batteries sufficiently charged?
• Is the handlebar attachment and saddle post correctly inserted and tightened?
• Are the wheel hub mounting nuts correctly tightened?
• Is the bell working correctly?
• Is all the wiring correctly connected?
fb.com/westhillbikes | westhillbikes.com
BIKE DIAGRAM AND PART NAMES
Valve
Tyre
Hub
Disc
Brake
Controller
Battery
Stem
Display
Brake Lever
Harness
Front Fork
Rim
Pedal
Crank Set
Chain
Kick Stand
Motor
Frame
Grip
Shifter
Handlebar
Seat Clamp
Seat Post
Rack
Mudguard
Saddle
MAINTENANCE
Charge the battery every 2 months even if the bike hasn’t been used
for this period.
Keep all working parts lubricated.
Have the bike serviced regularly with a Westhill dealer.
Parts that can be lubricated
Head set
Brake cables
Chain
Parts that should not be lubricated
Rear brake
Front brake
Rims
Tyres
5
fb.com/westhillbikes | westhillbikes.com
SPECIFICATIONS
6
MODEL VENTURE RANGER CLASSICST LINK
Bike
Wheel Size 27.5” 700c 26” 20”
Frame Size 18” / 46 cm 19” / 48 cm 16.5” / 42 cm 13” /33 cm
Max Rider Weight 120kg 120kg 120kg 120kg
Max Speed 25km/h 15.5mph 25km/h 15.5mph 25km/h 15.5mph 25km/h 15.5mph
Range Per Charge up to 60 miles*up to 60 miles*up to 60 miles*up to 40 miles*
Weight 24kg** 24kg** 24kg** 18kg**
Tyres Kenda 27.5x2.35”
Puncture Resistant TPI 60 Kenda 20"x 1.95"
Puncture Resistant
Kenda 700C All Terrain Tyre Kenda 26" All Terrain Tyre
Gears Shimano Altus 27 Speed
(3x9)
Shimano Altus 7 Speed Shimano Altus 7 SpeedShimano Altus 7 Speed
Brakes Tektro Mechanical
Disc Brakes
Tektro Hydraulic
Disc Brakes Tektro Hydraulic
Disc Brakes Tektro Hydraulic
Disc Brakes
Display
Battery
Capacity
Type LG Lithium-ion LG Lithium-ion LG Lithium-ion LG Lithium-ion
Rated Voltage 36V 36V 36V 36V
Motor
Make Bafang Bafang Bafang Bafang
Type Brushless Brushless Brushless Brushless
Rated Power 250W 250W 250W 250W
Rated Voltage 36V 36V 36V 36V
Rated Output Torque65nm 65nm 65nm 65nm
Charger
Current 2 Amps 2 Amps 2 Amps 2 Amps
Input 41.9V 41.9V 41.9V 41.9V
Type Smart Charger Smart Charger Smart Charger Smart Charger
Charge Time 4-6h 4-6h 4-6h 4-6h
Large Colour LCD display
14Ah LG Cell battery 14Ah LG Cell battery 14Ah LG Cell battery 10.2Ah LG Cell battery
Large Colour LCD display Large Colour LCD display Smart Compact LCD display
Charger
* The range will be different for every user and will be affected by a number of factors listed below.
* Factors that effect this: battery size, rider weight, weather conditions, terrain, temperature, gradience, tyre pressure, total
load, battery age, battery misuse (please see battery care and maintenance information:
https://westhillbikes.com/battery-care-maintenance).
** The weight includes the battery and has been rounded to the nearest whole number.
fb.com/westhillbikes | westhillbikes.com
1. When adjusting the seat post and handle bars do not exceed the safety limit.
2. To fold the pedals away, you must push the pedal in before folding up.
TURNING ON YOUR BATTERY
Before turning on the display for your Westhill Link you must turn the battery power on.
The switch is located above the charging port on the side of the battery.
When charging the battery please make sure the switch is turned OFF.
HOW TO UNFOLD YOUR BIKE
7
Please visit www.westhillbikes.com/link for a video on how to unfold / fold
your bike.
fb.com/westhillbikes | westhillbikes.com
REMOVING OR INSERTING THE BATTERY
To remove the battery you must fold the bike in half as shown in Figure 1.
Please unlock the battery with the keys provided and simply slide the battery
out of the frame. To insert the battery please reverse this process.
CHARGING THE BATTERY
• Plug the charger into the wall outlet. The LED on the battery charger will
illuminate RED when charging. The LED will change to GREEN when the
battery is fully charged.
• When the battery is fully charged, disconnect the charger from the wall
outlet before disconnecting the charger from the bike.
• Ensure that the cover over the charging port on the bike is closed and sealed.
• Be sure to use the charger supplied together with the bike, use of other
chargers will invalidate the warranty.
LIGHT ON/OFF
Press the UP arrow on the display for
2s to turn on the headlight, repeat this
process to turn the headlight off.
Press the button on the rear light to
turn on the rear light separately,
double press to change to a flashing
light. Pressing the button a third time
will turn off the rear light.
8
Figure 1 Figure 2
fb.com/westhillbikes | westhillbikes.com
BASIC INFORMATION
Aluminum, Al6061
20"
10.2Ah
36V 250W
36V 250W
DM03
6V/LED
TEKTRO Disc Brakes
Rear 7 Speeds
FRAME MATERIAL
FRONT FORK SIZE
BATTERY
MOTOR
CONTROLLER
DISPLAY
LIGHT
BRAKES
DERAILLEUR
9
DM03 E-BIKE DISPLAY USER MANUAL
23.5mm
1.3” OLED
22.2mm 63.5mm
INTERFACE
Loading interface
The loading logo interface is displayed for 3 seconds after the
display is turned on. When the communication connection is
established, the display enters the main interface which shows
information obtained from the controller.
fb.com/westhillbikes | westhillbikes.com
10
SPECIFICATIONS
- Power supply: DC 24V/36V/48V
- Rated current: 18 mA
- Shutdown leakage current: <1uA
- Screen specification: 1.3" OLED
- Communication method: UART/ CAN-BUS 2 modes
- Operating temperature: -20° C ~ 60° C
- Storage temperature: -30° C ~ 80° C
- Waterproof level: IP65
FUNCTION OVERVIEW
- Four buttons, ergonomic design
- Selective digital and icon power assist gear for high visibility
- Unit: km/ miles
- Speed: Real-time speed (SPEED), maximum speed (MAX), average speed (AVG)
- Battery indicator with percentage display
- Range: Endurance mileage (*available if BMS provides necessary info)
- Headlight on/off status indication and control
- Mileage: Subtotal mileage (TRIP), total mileage (ODO)
- Walk assist function
- Parameters setting and advanced setting
- Error code indication
INSTALLATION
1. Open the display locking clip and set the display on the left handlebar
(standard handlebar size: Ø22.2). Adjust the display so it is in a position to be
easily and comfortably operated whilst seated upon the bike. Use the 3mm
hex drive to tighten. Tightening torque: 0.8N.m.
*Note: Damage caused by excessive torque is not covered by the warranty.
2. Connect the 5 pin plug to the docking plug of the controller as marked.
Inhaltsverzeichnis
Andere WESTHILL BIKES Roller Handbücher
WESTHILL BIKES
WESTHILL BIKES VENTURE Bedienungsanleitung
WESTHILL BIKES
WESTHILL BIKES TERRAIN Bedienungsanleitung
WESTHILL BIKES
WESTHILL BIKES ENERGISE Bedienungsanleitung
WESTHILL BIKES
WESTHILL BIKES AEC-TDE16Z Bedienungsanleitung
WESTHILL BIKES
WESTHILL BIKES PHANTOM Bedienungsanleitung
WESTHILL BIKES
WESTHILL BIKES GHOST Bedienungsanleitung
WESTHILL BIKES
WESTHILL BIKES PHANTOM Bedienungsanleitung
WESTHILL BIKES
WESTHILL BIKES VENTURE Bedienungsanleitung
