Whalen Dulzura SPUS-DZMF-LBM Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2021-01-29 Rev. 0001-A

Dulzura Mobile File

Model # SPUS-DZMF-LBM Light Brown

SPUS-DZMF-DBM Dark Brown

ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP

POINTS, SHARP EDGES AS RECEIVED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASED: / /

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Dulzura Mobile File

MODEL # SPUS-DZMF-LBM / SPUS-DZMF-DBM

SPECIAL NOTE

Please read the instruction sheets completely before assembly. Examine all packaging

material before discarding carton. Remove any remaining staples from the carton before

discarding. Remove all parts from carton and separate into groups as indicated on part list.

Please ensure all parts are included prior to assembly. Use of power tools to complete

assembly is not recommended.

M A X I

U M

R E C O M M E N D E D W E I G

H T L O A D S

MAXIMUM LOAD 13.6 kg / 30 lb

MAXIMUM LOAD 22.7 kg / 50 lb

THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM

WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS

INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam

Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam

Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

You are now ready to assemble the KD unit.

123

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (Qty. 1) B- Left Side Panel (Qty. 1) C- Right Side Panel (Qty. 1)

D- Back Panel (Qty. 1) E-Crossbar (Qty. 1) F- Bottom Front Stretcher (Qty. 1)

G- Bottom Back Stretcher (Qty. 1) H- Upper Drawer Front Panel (Qty. 1 ) I- Lower Drawer Front Panel (Qty. 1)

J- Drawer Back Panel (Qty. 2) K- Drawer Left Side (Qty. 2) L- Drawer Right Side (Qty. 2)

M- Upper Drawer Bottom Panel (Qty. 1) N- Lower Drawer Bottom Panel (Qty. 1) O- Caster Support (Qty. 1)

P- Guide Rail (Qty. 4) Q- Guide Block (Qty. 8) R- File Hanger (Qty. 4)

S- 16” Ball Bearing Slide (Qty. 4) T- Locking Caster (Qty. 2) U- Swivel Caster (Qty. 3)

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

(1) Small Cam Lock (2) Large Cam Lock (3) Cam Bolt

(Qty. 8) (Qty. 22) (Qty. 30)

(4) M6 x 30 mm Small Wood Dowel (5) M8 x 30 mm Large Wood Dowel (6) M4 x 30 mm Screw

(Qty. 16+1 extra) (Qty. 18+1 extra) (Qty. 12+1 extra)

(7) M3.5 x 14 mm Screw (8) M4 x 25mm Handle Bolt (9) Metal Bracket

(Qty. 60+1 extra) (Qty. 4) (Qty. 8)

(10) Handle with Metal Plates

(Qty. 2)

Tools required (not included): Phillips screwdriver.

Drawer Assembling

NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back

and fully tighten all bolts. This will make the assembly easier.

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw the Cam Bolts (3) into the designated small holes on the Drawer Front Panels (H and I)

using a Phillips screwdriver. DO NOT overtighten the Cam Bolts.

NOTE: Screw-in cam bolts must be screwed down flush.

3. Pick up the Ball Bearing Slides (S) and separate the slide runners for the following step. Extend the slide

runner all the way forward. Press the plastic release lever of the ball bearing slides up and pull the slide

runner complete out.

4. Using the pilot holes as a guide, attach the separated Slide Runners (S) to the Drawer Left and Right

Sides (K and L) respectively with three 14 mm Screws (7) per slide runner.

Mounting holes

x 2

The open end points toward the edge with two

mounting holes running against

toward

the

same d

tion.

elease

Open end

Drawer Assembling

5. Insert the Small Wood Dowels (4) into the inner holes of one Drawer Back Panel (J).

6. Align and attach the Drawer Back Panel (J) between the Drawer Side Panels (K and L) with four 30 mm

Screws (6).

7. Repeat the same procedure to attach the other Drawer Back Panel (J).

8. Attach the Caster Support (O) to the Lower Drawer Bottom Panel (N) with four 30 mm Screws (6).

Grooves line up with each other and face inward.

x 2

Drawer Assembling

9. Attach one Swivel Caster (U) to the Caster Support (O) with four 14 mm Screws (7).

10. Slide the Drawer Bottom Panels (M and N) into the grooves between the Drawer Side Panels (K and L)

until fully inserted into the Drawer Back Panels (J).

The caster will face the floor

when the unit is turned upright

Drawer Assembling

11. Insert the Small Wood Dowels (4) into the inner holes of Drawer Side Panels (K and L).

12. Attach the Drawer Front Panels (H and I) to the Drawer Side Panels (K and L) by engaging four Small

Cam Locks (1) per drawer. (Refer to page 3 on Cam Lock system operation supplement).

13. Turn the drawers upright and attach two Handles with Metal Plates (10) to the outside of the Drawer Front

Panels (H and I) with two Handle Bolts (8) per handle.

K/L

Drawer Assembling

14. Position the Guide Rails (P) onto the Drawer Sides (K and L) with the high side facing inward.

15. Hook two Guide Blocks (Q) onto the high edge of each Guide Rails (P). Now set the File Hangers (R)

into the slot of Guide Blocks (Q). Slide the file hangers forward and backward to keep hanging files

organized.

16. Using the pilot holes as a guide, attach two separated slide tracks of the Ball Bearing Slide (S) to the Left

Side Panel (B) respectively with three 14 mm Screws (7) per slide track.

17. Repeat the same procedure with the Right Side Panel (C).

K/L

The high side faces inward

Mounting holes

end

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen AVT-22E Bedienungsanleitung

Whalen

Whalen ATD60H-13AX Bedienungsanleitung

Whalen

Whalen Emily Full over Twin Loft Bunk Bed with... Bedienungsanleitung

Whalen

Whalen Trimble Bookcase ECOM-TR30BK Bedienungsanleitung

Whalen

Whalen Bayside CSC72TC-10 Bedienungsanleitung

Whalen

Whalen Montcross MON7PD-E Bedienungsanleitung

Whalen

Whalen Triton ODUS-TWVD18 Bedienungsanleitung

Whalen

Whalen Axon Task WC-13AX-GO Bedienungsanleitung

Whalen

Whalen TEN2PST Bedienungsanleitung

Whalen

Whalen OD-LA60LD Bedienungsanleitung

Whalen

Whalen WF30DVW Bedienungsanleitung

Whalen

Whalen WSC72-MW Bedienungsanleitung

Whalen

Whalen James SPCA-JA48D Bedienungsanleitung

Whalen

Whalen Bayside CSC7PD-2B-UK Bedienungsanleitung

Whalen

Whalen Breenly SPUS-BRMF-WH Bedienungsanleitung

Whalen

Whalen Industrial Audio Tower Bedienungsanleitung

Whalen

Whalen WSZB244872-SV5MS Bedienungsanleitung

Whalen

Whalen SMXL-6 Bedienungsanleitung

Whalen

Whalen LWF30AVG Bedienungsanleitung

Whalen

Whalen Bayside FURNISHINGS CUKGLBST-3G Bedienungsanleitung

Whalen

Whalen WF60GVB Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CUSWMB-1 Bedienungsanleitung

Whalen

Whalen Springfield SPLS-SPMDBK-HW Bedienungsanleitung

Whalen

Whalen WHA-10005 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung