Whalen Breenly SPUS-BRMF-WH Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2023-08-10 Rev. 0001-A

Breenly Mobile File Cabinet

Model # SPUS-BRMF-WH

ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP

POINTS, SHARP EDGES AS RECEIVED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store

where it was purchased. Please call our toll-free customer service number and have your instructions and parts

list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to [email protected]

LOT NUMBER:

DATE PURCHASED: / /

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Breenly Mobile File Cabinet

MODEL # SPUS-BRMF-WH

SPECIAL NOTE

Please read the instruction sheets completely before assembly. Examine all packaging

material before discarding carton. Remove any remaining staples from the carton before

discarding. Remove all parts from carton and separate into groups as indicated on part list.

Please ensure all parts are included prior to assembly. Use of power tools to complete

assembly is not recommended.

M A X I

U M

R E C O M M E N D E D W E I G

H T L

O A D S

MAXIMUM LOAD 13.6 kg / 30 lb

MAXIMUM LOAD 22.7 kg / 50 lb

THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM

WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS

INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.

IMPORTANT

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-abrasive

surface. You will need the parts identified on page 4 and 5 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED OFF

WITH DAMP CLOTH.

Insert the Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam

Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam

Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

You are now ready to assemble the KD unit.

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel B- Left Side Panel C- Right Side Panel

(Qty. 1) (Qty. 1) (Qty. 1)

D- Back Panel E- Bottom Front Stretcher F- Bottom Back Stretcher

(Qty. 1) (Qty. 1) (Qty. 1)

G- Crossbar H- Upper Drawer Front Panel I- Lower Drawer Front Panel

(Qty. 1) (Qty. 1) (Qty. 1)

J- Upper Drawer Left Side K- Upper Drawer Right Side L- Lower Drawer Left Side

(Qty. 1) (Qty. 1) (Qty. 1)

M- Lower Drawer Right Side N- Drawer Back Panel O- Drawer Bottom Support

(Qty. 1) (Qty. 2) (Qty. 1)

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

P- Drawer Bottom Panel Q- Caster Support R- Guide Rail

(Qty. 2) (Qty. 1) (Qty. 4)

S- File Hanger T- Locking Caster U- Swivel Caster

(Qty. 4) (Qty. 2) (Qty. 3)

(1) Small Cam Lock (2) Large Cam Lock (3) Cam Bolt

(Qty. 12+1 extra) (Qty. 24+1 extra) (Qty. 36+1 extra)

(4) M6 x 30 mm Small Wood Dowel (5) M8 x 30 mm Large Wood Dowel (6) M3.5 x 12 mm Flat Head Screw

(Qty. 20+1 extra) (Qty. 18+1 extra) (Qty. 20+1 extra)

(7) M4 x 38 mm Screw (8) M3.5 x 15mm Pan Head Screw (9) Metal Bracket

(Qty. 12+1 extra) (Qty. 20+1 extra) (Qty. 8)

(10) Handle (Qty. 2) Glue (Qty. 1)

Tools required (not included): Phillips screwdriver.

Drawer Assembling

NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back

and fully tighten all bolts. This will make the assembly easier.

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw the Cam Bolts (3) into the designated small holes on the Drawer Front Panels (H and I)

and Lower Drawer Side Panels (L and M) using a Phillips screwdriver. DO NOT overtighten the Cam Bolts.

NOTE: Screw-in cam bolts must be screwed down flush.

3. Glue the Wood Dowels (4) into the inner holes on the Lower Drawer Side Panels (L and M), one Drawer

Back Panel (N) and the Drawer Bottom Support (O) at both ends.

NOTE: It is very important to use a small amount of glue on both ends of dowels and wipe away the

excess glue immediately with a damp cloth.

Drawer Assembling

4. Glue the Wood Dowels (4) into the inner holes on the Upper Drawer Side Panels (J and K) and the other

Drawer Back Panel (N) as shown.

5. Orient and attach the Caster Support (Q) to the Drawer Bottom Support (O) with four 38 mm Screws (7).

The rounded corners are

located at front of the unit.

Drawer Assembling

6. Attach one Swivel Caster (U) to the Caster Support (Q) with four 15 mm Screws (8).

7. Orient and align and attach one Drawer Back Panel (N) between the Upper Drawer Side Panels (J and K)

with four 38 mm Screws (7).

Grooves line up with each

other and face inward.

Drawer Assembling

8. Align and attach the Drawer Bottom Support (O) to the Lower Drawer Left Side Panel (L) by engaging

one Small Cam Lock (1). (Refer to page 3 on Cam Lock system operation supplement).

9. Orient and attach the other Drawer Back Panel (N) to the Lower Drawer Left Side Panel (L) with two 38 mm

Screws (7).

10. Repeat the same procedure to attach the Drawer Right Side Panel (M) at the opposite end.

11. Slide the Drawer Bottom Panels (P) into the grooves between the Drawer Side Panels until fully inserted

into the Drawer Back Panels (N).

The caster will face the floor

when the unit is turned upright.

Drawer Assembling

12. Attach the Upper Drawer Front Panel (H) to the Upper Drawer Side Panels (J and K) by engaging four

Small Cam Locks (1).

13. Attach the Lower Drawer Front Panel (I) to the Lower Drawer Side Panels (L and M) and Drawer

Bottom Panel (O) by engaging six Small Cam Locks (1).

14. Using the pilot holes as a guide, fit the Handle (10) to each Drawer Front Panel (H and I) with two 12 mm

Screws (6).

Inhaltsverzeichnis

Sprachen:

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen WSC72-MW Bedienungsanleitung

Whalen

Whalen BBAT27TC Bedienungsanleitung

Whalen

Whalen MLCRD Bedienungsanleitung

Whalen

Whalen Victory VIC7PD Bedienungsanleitung

Whalen

Whalen 5-Shelf Industrial Rack Bedienungsanleitung

Whalen

Whalen Legeant Bookcase Bedienungsanleitung

Whalen

Whalen Asherton File SPUS-ASHF Bedienungsanleitung

Whalen

Whalen Shelby 60in Bedienungsanleitung

Whalen

Whalen Bayside FURNISHINGS CSC3N1C-56-6 Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSC5430WD-4PC Bedienungsanleitung

Whalen

Whalen WF60EVB Bedienungsanleitung

Whalen

Whalen BJAVCL65 Bedienungsanleitung

Whalen

Whalen Afton Desk Bedienungsanleitung

Whalen

Whalen WSF48SH26C Bedienungsanleitung

Whalen

Whalen WS184872BW-SB5MSC2 Bedienungsanleitung

Whalen

Whalen WF48EVB Bedienungsanleitung

Whalen

Whalen WF24GVB Bedienungsanleitung

Whalen

Whalen Tavia ECOM-TA30BK Bedienungsanleitung

Whalen

Whalen O'nin Espresso Room Divider Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSC7PD-1N Bedienungsanleitung

Whalen

Whalen Fallbrook SPUS-FBBK-GM Bedienungsanleitung

Whalen

Whalen 48IN VANITY Bedienungsanleitung

Whalen

Whalen BBXL54NV Bedienungsanleitung

Whalen

Whalen Kendal Desk Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung