Whalen Jasper Chrome & Glass Pier Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Whalen Furniture Mfg., Inc. Page 1 Factory No. 16015

Jasper Chrome & Glass Pier

Model # ODUS-CGTP

ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP

POINTS, SHARP EDGES AS RECEIVED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to [email protected]

LOT NUMBER:

DATE PURCHASED: / /

Model # ODUS-CGTP

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 2 Factory No. 16015

Important

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 3 and 4 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED OFF

WITH DAMP CLOTH.

Insert Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam

Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam

Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam.

You are now ready to assemble the KD unit.

XXFINAL

12 43

Model # ODUS-CGTP

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 3 Factory No. 16015

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Left Top Panel (1) B- Left Front Panel (1) C- Left Back Panel (1)

D- Drawer Housing Left Panel (1) E- Right Top Panel (1) F- Right Front Panel (1)

G- Right Back Panel (1) H- Drawer Housing Right Panel (1) I- Upper Side Panel (2)

J- Bottom Panel (2) K- Slide Support (2) L- Bottom Front Stretcher (1)

M- Bottom Back Stretcher (1) N- Drawer Housing Back Panel (1) O- Drawer Housing Top Panel (1)

P- Drawer Front (1) Q- Drawer Back Panel (1) R- Drawer Left Side (1)

Model # ODUS-CGTP

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 4 Factory No. 16015

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

S- Drawer Right Side (1) T- Drawer Bottom Panel (1) U- Glass Top (1) V- Glass Shelf (1)

W- Upper Stretcher (2) X- File Rail (2) Y- Ball Bearing Slides (2)

(1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel (4) M6 x 15 mm Bolt

(52+2 extra) (56+2 extra) (40+2 extra) (16+1 extra)

(5) M6 x 32 mm Bolt (6) Lock Washer (7) Flat Washer (8) 1-1/4” Wood Screw

(4+1 extra) (20+1 extra) (20+1 extra) (8+1 extra)

(9) #6 x 1/2” Screw (10) Small Cam Lock (11) Cam Lock Cover (12) Cam Lock Cap (13) Floor Protector

(12+1 extra) (4+1 extra) (8+1 extra) (8+1 extra) (4+1 extra)

(14) Left Metal Bracket (15) Right Metal Bracket (16) Shelf Pin (17) Handle Bolt

(2) (2) (4+1 extra) (2)

(18) Handle (1) Glue (1) Touch-up Pen (1) Tipping Restraint Hardware Kit (1)

(Included in plastic bag)

Tools required: Phillips screwdriver and hammer (not provided)

Model # ODUS-CGTP

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 5 Factory No. 16015

File Drawer Assembling

1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Pick up the Ball Bearing Slides (Y) and separate the Slide Runners for the following steps. Extend the

Slide Runner all the way forward. Press the plastic release lever of the ball bearing slides up and pull

the Slide Runner complete out.

3. Attach the separated Slide Runners (Y) to the Drawer Side Panels (R and S) respectively with three 1/2”

Screws (9) per slide runner. Ensure the closed end of Slide Runner against the front edge of drawer side

panel with cam bolt holes.

4. Securely screw four Cam Bolts (2) into the designated small holes on the Drawer Front (P) with a

Phillips screwdriver, as shown.

Model # ODUS-CGTP

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 6 Factory No. 16015

File Drawer Assembling

5. Attach the Drawer Left and Right Side Panels (R and S) to the Drawer Front (P) by engaging four Small

Cam Locks (10) (Refer to page 2 on Cam Lock system operation supplement). Make sure that the

grooves face inward and line up with each other. As shown.

6. Slide the Drawer Bottom Panel (T) into the grooves between the Drawer Side Panels (R and S) until

fully inserted into the Drawer Front (P). Make sure the finished surface will face up. As shown.

Model # ODUS-CGTP

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 7 Factory No. 16015

File Drawer Assembling

7. Fasten the Drawer Back Panel (Q) to the Drawer Side Panels (R and S) using four 1-1/4” Wood Screws

(8). Make sure that Drawer Bottom Panel (T) fits securely into the groove of the Drawer Back Panel (Q).

Tighten all the screws with a Phillips screwdriver.

8. Turn the assembled drawer upright. Fit the File Rail (X) onto each Drawer Side Panel (R and S) with

the high side facing inward. As shown.

9. Attach the Handle (18) to the outside of the Drawer Front (P) using two provided Handle Bolts (17).

R/S

Model # ODUS-CGTP

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 8 Factory No. 16015

Assembly Instructions

10. Insert two Wood Dowels (3) into the large holes on one Slide Support (K). Make sure that you use a

small amount of glue with both ends of all dowels.

NOTE: It is very important to use a small amount of glue on both ends of dowels.

11. Align the inserted Wood Dowels (3) with the drilled holes on the Drawer Housing Left Panel (D) and

press them together. Make sure that the end with pilot hole against the countersunk hole on the Slide

Support is flush with the front edge of the Drawer Housing Left Panel (D). Insert two 1-1/4” Wood

Screws (8) through the countersunk holes of the Slide Support (K) and securely screw into place.

12. Repeat the same process to assemble the other Slide Support (K) to the Drawer Housing Right Panel (H).

13. Attach the separated Slide Tracks (Y) to the Slide Supports (K) respectively with three 1/2” Screws (9)

per slide track. Ensure the slide opening points towards the front of the unit.

FRON

FRONT

Model # ODUS-CGTP

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 9 Factory No. 16015

Assembly Instructions

14. Securely screw 4 Cam Bolts (2) into the designated small holes on the Left and Right Lower Side

Panels (D and H) respectively, as shown.

15. Locate Left and Right Top Panels (A and E), Left and Right Front Panels (B and F) and Left and Right

Back Panels (C and G) with the holes facing up. Securely screw the Cam Bolts (2) into the designated

small holes, as shown in the illustration.

222

Model # ODUS-CGTP

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 10 Factory No. 16015

Assembly Instructions

16. Locate the Bottom Panels (J), the Bottom Back Stretcher (M) and the Drawer Housing Top Panel (O)

with the holes facing up. Securely screw the Cam Bolts (2) into the designated small holes, as shown in

the illustration.

17. Insert one Wood Dowel (3) into the middle end hole of the Drawer Housing Back Panel (N) and attach

it to the Bottom Back Stretcher (M) by engaging two Cam Locks (1) (Refer to page 2 on Cam Lock

system operation supplement). Make sure that the Cam Locks will face inward.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen Springfield SPLS-SPMDBK-HW Bedienungsanleitung

Whalen

Whalen Aurora ARFP72CRS-6 Bedienungsanleitung

Whalen

Whalen Tustin Parsons ECOM-PARS1 Bedienungsanleitung

Whalen

Whalen Afton Desk Bedienungsanleitung

Whalen

Whalen Better Homes and Gardens Ellis Shutter Bedienungsanleitung

Whalen

Whalen 5-Shelf Industrial Rack Bedienungsanleitung

Whalen

Whalen WSIR772472BS-SWD Bedienungsanleitung

Whalen

Whalen BBAT27TC Bedienungsanleitung

Whalen

Whalen LANTOFLBB Bedienungsanleitung

Whalen

Whalen PRO-9 Bedienungsanleitung

Whalen

Whalen BJKC Bedienungsanleitung

Whalen

Whalen Bayside 126678 Bedienungsanleitung

Whalen

Whalen BBXL54NV Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSC7PD-1N Bedienungsanleitung

Whalen

Whalen ECOM-RPD Bedienungsanleitung

Whalen

Whalen WSHD5PSB Bedienungsanleitung

Whalen

Whalen VANITY WITH TOP WF30CVG Bedienungsanleitung

Whalen

Whalen odus-tdpd Bedienungsanleitung

Whalen

Whalen Bayside CSC72TC-10 Bedienungsanleitung

Whalen

Whalen OD-LA60LD Bedienungsanleitung

Whalen

Whalen SFKCWWR Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSCDT-3E Bedienungsanleitung

Whalen

Whalen 48IN VANITY Bedienungsanleitung

Whalen

Whalen AVC-22E Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung