Whalen WSF48RV26DO Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2019-06-25 Rev. 0001-A

Ridgeview 48in Fireplace Console

Model # WSF48RV26DO

# WSF48RV26WA

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASE

IMPORTANT

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and

non-abrasive surface. You will need the parts identified on page 3 and 4 of this instruction manuals.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH THE DOWELS. EXCESS GLUE CAN BE

WIPED OFF WITH A DAMP CLOTH.

Insert dowel at least half way by tapping lightly with a rubber mallet (not included), IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the pre-drilled small holes on the panel. Connect both panels together; making

sure the Cam Bolt goes into the pre-drilled hole at the end of the panel with the Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole in the panel. Make sure the arrow on the Cam Lock is

pointed towards the Cam Bolt.

3. Once the Cam Bolt is connected inside the Cam Lock, take a Phillips screwdriver (not included) and

tighten the Cam Lock clockwise.

4. Plug the Cam Lock Cover into the cross slot of the Cam Locks to conceal the cam.

You are now ready to assemble the KD unit.

How to adjust the European adjustable hinges on doors

Shipping may cause doors to go out of alignment. If you find that the doors need to be adjusted

slightly, turn the appropriate screw, as illustrated.

1. TO ADJUST DOOR FORWARD OR BACKWARD.

2. TO ADJUST DOOR TO RIGHT OR TO LEFT.

3. TO ADJUST DOOR UP OR DOWN.

GLUE

FINAL

1 2 43

1234

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (Qty. 1) B- Fixed Shelf (Qty. 1) C- Base (Qty. 1)

D- Side Panel (Qty. 2) E- Left Partition Panel (Qty. 1) F- Right Partition Panel (Qty. 1)

G- Upper Crossbar (Qty. 1) H- Middle Crossbar (Qty. 1) I- Middle Left Stile (Qty. 1)

J- Middle Right Stile (Qty. 1) K- Firebox Support (Qty. 1) L- Left Adjustable Shelf (Qty. 2)

M- Right Adjustable Shelf (Qty. 2) N- Door (Qty. 2) O- Left Back Panel (Qty. 1)

P- Middle Back Panel (Qty. 1) Q- Right Back Panel (Qty. 1) R- Glass Door Insert (Qty. 2)

Fireplace Insert (Qty. 1) Remote Control with Battery (Qty. 1) (1) Cam Lock (Qty. 22+1 extra)

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

(2) Cam Bolt (3) M8 x 30 mm Wood Dowel (4) M3.5 x 12mm Screw

(Qty. 22+1 extra) (Qty. 24+1 extra) (Qty. 24+1 extra)

(5) M3.5 x 15mm Washer Head Screw (6) M4 x 30 mm Screw (7) M3.5 x 15mm Pan Head Screw

(Qty. 34+1 extra) Qty. 8+1 extra) (Qty. 8+1 extra)

(8) M4 x 50mm Screw (9) Mending Plate (10) Stopper

(Qty. 4+1 extra) (Qty. 2) (Qty. 2)

(11) L-shaped Metal Bracket (12) Handle (13) 5/32’’ x 22mm Bolt

(Qty. 2) (Qty. 2) (Qty. 4+1 extra)

(14) Shelf Support (15) Acrylic Stopper (16) Cam Cover

(Qty. 16+1 extra) (Qty. 1) (Qty. 12+1 extra)

Glue Touch-up Pen Tipping Restraint Hardware Kit (Qty. 2)

(Qty. 1) (Qty. 1) (Included in plastic bag)

Tools required (not included): Phillips screwdriver, stud finder, pencil, tape measure, power drill and 1/8 in

drill bit.

Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A), Base (C),

Partition Panels (E and F) and Middle Crossbar (H) with a Phillips screwdriver.

NOTE: Screw-in cam bolts must be screwed down flush.

3. Insert fourteen Wood Dowels (3) into the inner holes on the Fixed Shelf (B) and Partition Panels (E and

F). Make sure that you use a small amount of glue with both ends of all dowels.

NOTE: It is very important to use a small amount of glue on both ends of dowels.

Assembly Instructions

4. Align and attach the Middle Crossbar (H) to the Fixed Shelf (B) by engaging three Cam Locks (1)

(Refer to page 2 on Cam Lock system operation supplement).

5. Align and attach the Middle Left Stile (I) to the Left Partition Panel (E) and fasten them into place with

four 30 mm Screws (6).

6. Repeat the same procedure to attach the Middle Right Stile (J) to the Right Partition Panel (F).

Assembly Instructions

7. Align and attach the Stoppers (10) to the Partition Panels (E and F) with four 12 mm Screws (4).

8. Attach the Fixed Shelf (B) beween the Partition Panels (E and F) by engaging four Cam Locks (1).

E/F

Assembly Instructions

9. Using the wood dowels as a guide, firmly press the assembled Partition Panels (E and F) to the Base (C)

and fasten them in place with four 50 mm Screws (8). Fully tighten the screws with a Phillips

screwdriver.

10. Glue the Wood Dowels (3) into the inner holes of Side Panels (D) and Upper Crossbar (G) as shown.

NOTE: Do Not insert the wood dowels into the cam bolts holes.

Assembly Instructions

11. Align the large holes on one Side Panel (D) with the inserted Wood Dowels (3) on the Base (C). Firmly

press them together and fasten it in place by engaging two Cam Locks (1).

12. Repeat the same procedure to attach the other Side Panel (D) at the other end.

13. Align and attach the Upper Crossbar (G) to the Top Panel (A) with three Cam Locks (1).

Assembly Instructions

14. Place the Top Panel (A) onto the inserted Wood Dowel (3) properly and fasten it in place by engaging

eight Cam Locks (1).

15. Ask for assistance to flip the unit around at its front edge as shown.

16. With the pilot holes as a guide, fasten the Middle Crossbar (H) to the Middle Left and Right Stiles (I

and J) by attaching two Mending Plates (9) at the joints, using two 12mm Screws (4) per plate.

AD/E/F

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen Fallbrook SPUS-FBBK-GM Bedienungsanleitung

Whalen

Whalen CAMELOT Bedienungsanleitung

Whalen

Whalen WF24AVG Bedienungsanleitung

Whalen

Whalen Tustin Parsons ECOM-PARS1 Bedienungsanleitung

Whalen

Whalen WF60AVG Bedienungsanleitung

Whalen

Whalen Bayside CUS3PO-4 Bedienungsanleitung

Whalen

Whalen Bayside CSCGLBST-4 Bedienungsanleitung

Whalen

Whalen Bayside CUS60WD-5 Bedienungsanleitung

Whalen

Whalen BBLAVC54T Bedienungsanleitung

Whalen

Whalen CSC7PCHD-3VN Bedienungsanleitung

Whalen

Whalen Bayside CSC3N1C-56-9 Bedienungsanleitung

Whalen

Whalen Westport SMUBCH Betriebsanleitung

Whalen

Whalen Amesville MNFP50AV26IA Bedienungsanleitung

Whalen

Whalen TEN2PST Bedienungsanleitung

Whalen

Whalen WF60GVB Bedienungsanleitung

Whalen

Whalen MainStays Parsons Bedienungsanleitung

Whalen

Whalen Bayside CSC7PD-12-UK Bedienungsanleitung

Whalen

Whalen Fallbrook SPUS-FBPS-GM Bedienungsanleitung

Whalen

Whalen Huntingdon EC-HU48D Bedienungsanleitung

Whalen

Whalen Bayside CUS4PCHD-1PC Bedienungsanleitung

Whalen

Whalen WSLPWS Bedienungsanleitung

Whalen

Whalen Springfield SPLS-SPMDBK-HW Bedienungsanleitung

Whalen

Whalen BBXL54NV Bedienungsanleitung

Whalen

Whalen Barkston Lane Desk with Hutch Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung