Whirlpool 2225408 Bedienungsanleitung

TOP-MOUNT

REFRIGERATOR

Use & Care Guide

Table of Contents ............................................2

2225408

TABLE OF CONTENTS

REFRIGERATOR SAFETY .............................................................3

Proper Disposal of Your Old Refrigerator....................................3

REFRIGERATOR INSTALLATION.................................................4

Unpacking ....................................................................................4

Location Requirements ................................................................4

Electrical Requirements ...............................................................5

Water Supply Connection ............................................................5

Refrigerator Doors: Removing,

Reversing (optional) and Replacing .............................................6

Door Closing and Alignment ........................................................9

Normal Sounds ............................................................................9

REFRIGERATOR USE ..................................................................10

Ensuring Proper Air Circulation..................................................10

Using the Control(s)....................................................................10

Ice Maker....................................................................................11

REFRIGERATOR FEATURES ......................................................11

Refrigerator Shelves ...................................................................11

Lateral Adjustable Shelf .............................................................12

Crispers and Meat Drawers .......................................................12

Crisper Humidity Control ...........................................................13

Chilled Meat Drawer...................................................................13

Wine or Can/Bottle Rack ...........................................................13

Utility or Egg Bin.........................................................................13

FREEZER FEATURES ..................................................................14

Freezer Shelf ..............................................................................14

Adjustable Half-width Freezer Shelf ..........................................14

Pull-out Freezer Floor.................................................................14

DOOR FEATURES ........................................................................14

Door Rails ...................................................................................14

Can Racks and Door Bins..........................................................15

Adjustable Utility Compartment & Tray .....................................15

Flip-up Door Shelf ......................................................................15

REFRIGERATOR CARE ...............................................................15

Cleaning......................................................................................15

Changing the Light Bulbs...........................................................16

Power Interruptions....................................................................16

Vacation and Moving Care.........................................................16

TROUBLESHOOTING ..................................................................17

ASSISTANCE OR SERVICE.........................................................19

In the U.S.A. ...............................................................................19

WARRANTY ..................................................................................20

REFRIGERATORSAFETY

Proper Disposal of Your

Old Refrigerator

IMPORTANT: Child entrapment and suffocation are not problems

of the past. Junked or abandoned refrigerators are still dangerous

– even if they will sit for “just a few days.” If you are getting rid of

your old refrigerator, please follow these instructions to help

prevent accidents.

Before you throw away your old refrigerator or freezer

■Take off the doors.

■Leave the shelves in place so that children may not easily

climb inside.

You can be killed or seriously injured if you don't

immediately follow instructions.

You can be killed or seriously injured if you don't

follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you

what can happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all

safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or

“WARNING.” These words mean:

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic

precautions:

■Plug into a grounded 3 prong outlet.

■Do not remove ground prong.

■Do not use an adapter.

■Do not use an extension cord.

■Disconnect power before servicing.

■Replace all panels before operating.

■Remove doors from your old refrigerator.

■Use nonflammable cleaner.

■Keep flammable materials and vapors, such as

gasoline, away from refrigerator.

■Use two or more people to move and install

refrigerator.

■Disconnect power before installing ice maker (on

ice maker kit ready models only).

■Use a sturdy glass when dispensing ice or water

(on some models).

SAVE THESE INSTRUCTIONS

WARNING

Suffocation Hazard

Remove doors from your old refrigerator.

Failure to do so can result in death or

brain damage.

REFRIGERATOR

INSTALLATION

Unpacking

Removing packaging materials

■Remove tape and glue residue from surfaces before turning

on the refrigerator. Rub a small amount of liquid dish soap

over the adhesive with your fingers. Wipe with warm water

and dry.

■Do not use sharp instruments, rubbing alcohol, flammable

fluids, or abrasive cleaners to remove tape or glue. These

products can damage the surface of your refrigerator. For

more information, see the “Refrigerator Safety”section.

■On some models, shelves, bins, door shelf rails, and other

feature parts may be packaged in the Interior FeaturePak.

Follow the instructions contained in the package for proper

assembly.

■Depending on your model, to remove the protective

(transparent) film that is on the nameplate, which is located

on the freezer handle, use your fingernail and peel off the film,

starting from one side and peeling to the other.

IMPORTANT: Do not remove the white foam air return insert that

is located behind the control panel on the ceiling of the

refrigerator (on some models). The insert is part of the refrigerator

and not part of the packing material. If the insert is removed, ice

may migrate down from the freezer and cause icicles to form.

Cleaning before use

After you remove all of the package materials, clean the inside of

your refrigerator before using it. See the cleaning instructions in

the “Refrigerator Care”section.

Location Requirements

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂ in.

(1.25 cm) space on each side and at the top. When installing your

refrigerator next to a fixed wall, leave 2 in. (5.08 cm) minimum on

each side (depending on your model) to allow for the door to

swing open. If your refrigerator has an ice maker, allow extra

space at the back for the water line connections.

NOTE: Do not install the refrigerator near an oven, radiator, or

other heat source, nor in a location where the temperature will fall

below 55°F (13°C).

WARNING

Excessive Weight Hazard

Use two or more people to move and install

refrigerator.

Failure to do so can result in back or other injury.

When MovingYour Refrigerator:

Your refrigerator is heavy. When moving the refrigerator

for cleaning or service, be sure to protect the floor.

Always pull the refrigerator straight out when moving it.

Do not wiggle or “walk”the refrigerator when trying to move

it, as floor damage could occur.

Important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when

they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping.

For your protection, tempered glass is designed to shatter

into many small, pebble-size pieces. This is normal. Glass

shelves and covers are heavy. Use special care when re-

moving them to avoid impact from dropping.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from refrigerator.

Failure to do so can result in death, explosion,

or fire.

2" (1.25 cm)

2" (5.08 cm)

Electrical Requirements

Before you move your refrigerator into its final location, it is

important to make sure you have the proper electrical

connection:

Recommended grounding method

A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused, grounded

electrical supply is required. It is recommended that a separate

circuit serving only your refrigerator be provided. Use an outlet

that cannot be turned off by a switch. Do not use an

extension cord.

NOTE: Before performing any type of installation, cleaning, or

removing a light bulb, turn the control (Thermostat, Refrigerator

or Freezer Control depending on the model) to OFF and then

disconnect the refrigerator from the electrical source. When you

are finished, reconnect the refrigerator to the electrical source

and reset the control (Thermostat, Refrigerator or Freezer Control

depending on the model) to the desired setting.

Water Supply Connection

Read all directions carefully before you begin.

IMPORTANT:

■If you turn the refrigerator on before the water line is

connected, turn the ice maker OFF.

■All installations must meet local plumbing code requirements.

■Use copper tubing and check for leaks. Install copper tubing

only in areas where temperatures will remain above freezing.

Tools required: Standard screwdriver, ⁷⁄₁₆ in. and ¹⁄₂ in. open-end

wrenches or two adjustable wrenches, ¹⁄₄ in. nut driver and drill

bit, hand drill or electric drill (properly grounded).

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄ in.

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing.

Before purchasing, make sure a saddle-type valve complies with

your local plumbing codes. Do not use a piercing-type or ³⁄₁₆ in.

(4.76 mm) saddle valve which reduces water flow and clogs more

easily.

Cold water supply

Connect the ice maker to a cold water line with water pressure

between 30 and 120 psi. If you have questions about your water

pressure, call your utility company.

Connecting to Water Line

1. Unplug refrigerator or disconnect power.

2. Turn OFF main water supply. Turn ON nearest faucet long

enough to clear line of water.

3. Locate a ½in. to 1¹⁄₄ in. (1.25 cm to 3.18 cm) vertical COLD

water pipe near the refrigerator.

NOTE: Horizontal pipe will work, but drill on the top side of

the pipe, not the bottom. This will help keep water away from

the drill and normal sediment from collecting in the valve.

4. Determine the length of copper tubing you need. Measure

from the connection on the lower left rear of refrigerator to the

water pipe. Add 7 ft. (2.1 m) to allow for cleaning. Use ¹⁄₄ in.

(6.35 mm) O.D. (outside diameter) copper tubing. Be sure

both ends of copper tubing are cut square.

5. Using a grounded drill, drill a ¹⁄₄ in. hole in the cold water pipe

you have selected.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Failure to follow these instructions can result in

death, fire, or electrical shock.

Do not use an extension cord.

Do not use an adapter.

Do not remove ground prong.

1. Cold Water Pipe

2. Pipe Clamp

3. Copper Tubing

4. Compression Nut

5. Compression Sleeve

6. Shutoff Valve

7. Packing Nut

6. Fasten the shutoff valve to the cold water pipe with the pipe

clamp. Be sure the outlet end is solidly in the ¹⁄₄ in. drilled hole

in the water pipe and that the washer is under the pipe clamp.

Tighten the packing nut. Tighten the pipe clamp screws

carefully and evenly so washer makes a watertight seal. Do

not overtighten or you may crush the copper tubing.

7. Slip the compression sleeve and compression nut on the

copper tubing as shown. Insert the end of the tubing into the

outlet end squarely as far as it will go. Screw compression nut

onto outlet end with adjustable wrench. Do not overtighten.

8. Place the free end of the tubing in a container or sink, and

turn ON the main water supply. Flush the tubing until water is

clear. Turn OFF the shutoff valve on the water pipe. Coil the

copper tubing.

Connecting to Refrigerator

1. Attach the copper tube to the valve inlet using a compression

nut and sleeve as shown. Tighten the compression nut. Do

not overtighten. Use the tube clamp on the back of the

refrigerator to secure the tubing to the refrigerator as shown.

This will help prevent damage to the tubing when the

refrigerator is pushed back against the wall.

2. Turn shutoff valve ON.

3. Check for leaks. Tighten any connections (including

connections at the valve) or nuts that leak.

4. The ice maker is equipped with a built-in water strainer. If

your water conditions require a second water strainer, install it

in the ¹⁄₄ in. (6.35 mm) water line at either tube connection.

Obtain a water strainer from your nearest appliance dealer.

5. Plug in refrigerator or reconnect power.

Refrigerator Doors: Removing,

Reversing (optional) and Replacing

TOOLS NEEDED: ⁵⁄₁₆ in. hex-head socket wrench, No. 2 Phillips

screwdriver, flat-head screwdriver, ⁵⁄₁₆ in. open-end wrench, flat 2

in. putty knife.

IMPORTANT:

■Before you begin, turn the refrigerator control OFF and

unplug refrigerator or disconnect power. Remove food and

adjustable door or utility bins from doors.

■If you only want to remove and replace the doors, see the

“Door and Hinge Removal”and “Door and Hinge

Replacement”sections.

Door and Hinge Removal

⁵⁄₁₆” Hex-Head Hinge Screw

1. Unplug refrigerator or disconnect power.

2. Open refrigerator door and remove base grille from the

bottom front of the refrigerator (see Base Grille graphic).

3. Close the refrigerator door and keep both doors closed until

you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the doors while the

hinges are being moved. Do not depend on the door magnets

to hold the doors in place while you are working.

4. Remove the parts for the top hinge as shown in Top Hinge

graphic. Lift the freezer door free from the cabinet.

5. Remove the parts for the center hinge as shown in the Center

Hinge graphic. Lift the refrigerator door free from the cabinet.

6. Remove the parts for the bottom hinge as shown in the

Bottom Hinge graphic.

IMPORTANT: If you want to reverse your doors so that they open

in the opposite direction, follow these steps. If you are not

reversing the doors, see “Door and Hinge Replacement.”

1. Tube Clamp

2. Copper Tubing

3. Compression Nut

4. Valve Inlet

Door Reversal (optional)

Cabinet

1. Remove ⁵⁄₁₆ in. hex-head hinge screws from handle side and

move them to opposite side (see Graphic 1-1).

2. Remove cabinet hinge hole plugs from cabinet top and move

them to opposite side hinge holes as shown (see Graphic

1-2).

Freezer door

1. Remove freezer handle assembly as shown. Keep all parts

together (see Graphic 2).

2. Remove door hinge hole plug. Move to opposite side as

shown (see Graphic 3).

3. Remove door handle sealing screws. Move to opposite side

of freezer door as shown (see Graphic 4).

4. Remove door stop. Move to opposite side of freezer door as

shown (see Graphic 5).

5. Position freezer handle on opposite side of freezer door.

Assemble handles on door as shown (see Graphic 2).

6. Tighten all screws. Set aside door until hinges and refrigerator

compartment door are in place.

Refrigerator door

1. Remove refrigerator handle bottom trim. For Style 1, remove

the handle screw cover (see Graphic 6-1). For Style 2, slide

trim down as shown (see Graphic 6-2).

2. Remove refrigerator handle assembly as shown. Keep all

parts together (see Graphic 6-3).

3. Remove door hinge hole plug from refrigerator door. Move to

opposite side hinge hole as shown (see Graphic 3).

4. Remove door handle sealing screws. Move to opposite side

of refrigerator door as shown (see Graphic 4).

5. Remove door handle seal screw front. Move to opposite side

of refrigerator door as shown (see Graphic 7).

6. Remove door stop. Move to opposite side of refrigerator door

as shown (see Graphic 5).

7. Position refrigerator handle on opposite side of the

refrigerator door as shown (see Graphic 6-3). Drive top two

screws in handle first. Align lower portion of handle and drive

bottom screw.

8. Align refrigerator bottom trim. For Style 1, replace the door

handle screw cover (see Graphic 6-1). For Style 2, slide trim

into place (see Graphic 6-2).

9. Tighten all screws. Set aside refrigerator door until bottom

hinge is installed on product.

Door and Hinge Replacement

NOTE: Graphic may be reversed if door swing is reversed.

1. Replace the parts for the bottom hinge as shown. Tighten

screws. Replace the refrigerator door.

NOTE: Provide additional support for the doors while the

hinges are being moved. Do not depend on the door magnets

to hold the doors in place while you are working.

2. Assemble the parts for the center hinge as shown and tighten

all screws (see Center Hinge graphic). Replace the freezer

door.

3. Assemble the parts of the top hinge as shown (see Top Hinge

graphic). Do not tighten screws completely.

4. Line up the doors so that the bottom of the freezer door

aligns evenly with the top of the refrigerator door. Tighten all

screws.

Final Steps

1. Check all holes to make sure that hole plugs and screws are

in place. Reinstall top hinge cover (see Top Hinge graphic).

2. Replace the base grille (see Base Grille graphic).

3. Plug in refrigerator or reconnect power.

4. Reset the controls (see “Using the Control(s)”section).

5. Return all removable door parts to doors and food to product.

Door Stop Screw Door Hinge Hole Plug

Door Handle Sealing Screw Cabinet Hinge Hole Plug

Flat-Head Handle Screw Door Handle Screw Cover

Door Handle Seal Screw Front Round-Head Handle Screw

Door Removal &

Replacement Door Swing Reversal (optional)

1. Door Hinge Hole Plug

1. Flat-Head Handle Screws

2. Freezer Handle

1. Cabinet Hinge Hole Plugs

1. Door Handle Sealing Screws

1. Door Stop Screw

2. Door Stop

1. Door Handle

Seal Screw Front

1-2

6-1

1. Door Handle

6-2

1. Flat-Head

Handle Screw

2. Refrigerator Handle

3. Handle Screw

6-3

Screw Cover

Side View

Front View

1. Bottom Hinge

2. " Hex-Head Hinge Screws

Base Grille

Top Hinge

Bottom Hinge

Center Hinge

1. Center Hinge

2. " Hex-Head Hinge Screws

1. Top Hinge Cover

2. " Hex-Head Hinge Screws

3. Top Hinge

516

" Hex-Head Hinge

Screws

1-1

516

Door Closing and Alignment

Door Closing

Your refrigerator has two front adjustable rollers –one on the right

and one on the left. If your refrigerator seems unsteady or you

want the doors to close easier, adjust the refrigerator's tilt using

the instructions below:

1. Plug into a grounded 3 prong outlet.

2. Move the refrigerator into its final position.

3. Remove the base grille (see “Base Grille”earlier in this

section). The two leveling screws are part of the front roller

assemblies which are at the base of the refrigerator on either

side.

4. Use a screwdriver to adjust the leveling screws. Turn the

leveling screw to the right to raise that side of the refrigerator

or turn the leveling screw to the left to lower that side. It may

take several turns of the leveling screws to adjust the tilt of

the refrigerator.

NOTE: Having someone push against the top of the

refrigerator takes some weight off the leveling screws and

rollers. This makes it easier to adjust the screws.

5. Open both doors again and check to make sure that they

close as easily as you like. If not, tilt the refrigerator slightly

more to the rear by turning both leveling screws to the right. It

may take several more turns, and you should turn both

leveling screws the same amount.

6. Replace the base grille.

Door Alignment

If the space between your doors looks uneven, you can adjust it

using the instructions below:

1. Pry off the top hinge cover.

2. Loosen the top hinge screws using a ⁵⁄₁₆ in. socket or wrench.

3. Have someone hold the door in place or put a spacer

between the doors while you tighten the top hinge screws.

4. Replace the top hinge cover.

Normal Sounds

Your new refrigerator may make sounds that your old one didn’t

make. Because the sounds are new to you, you might be

concerned about them. Most of the new sounds are normal. Hard

surfaces, such as the floor, walls, and cabinets, can make the

sounds seem louder. The following describes the kinds of sounds

and what may be making them.

■If your product is equipped with an ice maker, you will hear a

buzzing sound when the water valve opens to fill the ice

maker for each cycle.

■Your refrigerator is designed to run more efficiently to keep

your food items at the desired temperatures and to minimize

energy usage. The high efficiency compressor and fans may

cause your refrigerator to run longer than your old one. You

may also hear a pulsating or high-pitched sound from the

compressor or fans adjusting to optimize performance.

■You may hear the evaporator fan motor circulating air through

the refrigerator and freezer compartments. The fan speed

may increase as you open the doors or add warm food.

■Rattling noises may come from the flow of refrigerant, the

water line, or items stored on top of the refrigerator.

■Water dripping on the defrost heater during a defrost cycle

may cause a sizzling sound.

■As each cycle ends, you may hear a gurgling sound due to

the refrigerant flowing in your refrigerator.

■Contraction and expansion of the inside walls may cause a

popping noise.

■You may hear air being forced over the condenser by the

condenser fan.

■You may hear water running into the drain pan during the

defrost cycle.

REFRIGERATOR USE

Ensuring Proper Air Circulation

In order to ensure proper temperatures, you need to permit

airflow between the refrigerator and freezer sections. As shown in

the illustration, cool air enters through the bottom of the freezer

section and moves up. Most of the air then flows through the

freezer section vents and recirculates under the freezer floor. The

rest of the air enters the refrigerator section through the top vent.

Do not block any of these vents with food packages. If the vents

are blocked, airflow will be prevented and temperature and

moisture problems may occur.

IMPORTANT: Because air circulates between both sections, any

odors formed in one section will transfer to the other. You must

thoroughly clean both sections to eliminate odors. To prevent

odor transfer and drying out of food, wrap or cover foods tightly.

Using the Control(s)

For your convenience, your refrigerator control(s) are preset at the

factory. When you first install your refrigerator, make sure that the

control(s) are still preset to the mid-settings as shown.

NOTE: To turn your refrigerator off, turn the refrigerator control to

the word OFF or until the word OFF appears. Your product will

not cool when the refrigerator control is set to OFF.

Mid-setting “3”

Mid-setting “4”

IMPORTANT:

■Give your refrigerator time to cool down completely before

adding food. It is best to wait 24 hours before you put food

into the refrigerator.

■If you add food before the refrigerator has cooled completely,

your food may spoil. Adjusting the Refrigerator and Freezer

Controls to a higher (colder) than recommended setting will

not cool the compartments any faster.

Adjusting Controls

The mid-setting(s) indicated in the previous section should be

correct for normal household usage. The controls are set

correctly when milk or juice is as cold as you like and when ice

cream is firm.

If the temperature is too warm or too cold in the refrigerator or

freezer, first check the air vents to be sure they are not blocked.

If you need to adjust temperatures, use the settings listed in the

chart below as a guide. On models with two controls, adjust the

refrigerator temperature first. Wait at least 24 hours between

adjustments and then recheck the temperatures.

CONDITION/REASON: ADJUSTMENT:

REFRIGERATOR section too

warm

■Door opened often, large

amount of food added or room

temperature very warm

Adjust REFRIGERATOR

or TEMPERATURE

Control one setting

higher

FREEZER section too warm/ice

not made fast enough

■Door opened often, or large

amount of food added or very

cold room temperature (can’t

cycle often enough)

■Heavy ice usage

Adjust FREEZER or

TEMPERATURE Control

one setting higher

REFRIGERATOR section

too cold

■Controls not set correctly for

your conditions

Adjust REFRIGERATOR

or TEMPERATURE

Control one setting

lower

FREEZER section too cold

■Controls not set correctly for

your conditions

Adjust FREEZER or

TEMPERATURE Control

one setting lower

REFRIGERATOR 4FREEZER

Inhaltsverzeichnis

Andere Whirlpool Kühlschrank Handbücher

Whirlpool

Whirlpool WB70I 952 X Installations- und Betriebshandbuch

Whirlpool

Whirlpool 3ET18DK Bedienungsanleitung

Whirlpool

Whirlpool GS6SHANLB00 Bedienungsanleitung

Whirlpool

Whirlpool EL88TRRWS01 Bedienungsanleitung

Whirlpool

Whirlpool EBI9MK Bedienungsanleitung

Whirlpool

Whirlpool WRS965CIAE Montageanleitung

Whirlpool

Whirlpool ARG 316A Bedienungsanleitung

Whirlpool

Whirlpool GI6FARXXQ Bedienungsanleitung

Whirlpool

Whirlpool GC3SHEXNB04 Bedienungsanleitung

Whirlpool

Whirlpool ED2NHEXNL00 Bedienungsanleitung

Whirlpool

Whirlpool WRR56X18FW02 Bedienungsanleitung

Whirlpool

Whirlpool WRT138TFYB Montageanleitung

Whirlpool

Whirlpool ED2GHEXNB05 Bedienungsanleitung

Whirlpool

Whirlpool ET1PHKXPQ Montageanleitung

Whirlpool

Whirlpool WRT371SZBW00 Bedienungsanleitung

Whirlpool

Whirlpool ARC 1872 IX Bedienungsanleitung

Whirlpool

Whirlpool RS20AQXFN00 Bedienungsanleitung

Whirlpool

Whirlpool ED5KVEXVB - 25CF Texture Dr Plastic HANDLMECHANICAL... Montageanleitung

Whirlpool

Whirlpool ED22MK Bedienungsanleitung

Whirlpool

Whirlpool TOP-MOUNT REFRIGERATOR Bedienungsanleitung

Whirlpool

Whirlpool W8FRNGFVD - Top Freezer Refrigerator Benutzerhandbuch

Whirlpool

Whirlpool W8TXNGMW Gebrauchsanweisung

Whirlpool

Whirlpool Side by side Refrigerator/Freezer Bedienungsanleitung

Whirlpool

Whirlpool W8FLNGFV Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung