Whirlpool ED22DK Bedienungsanleitung

Use&CareGuide

Freezer

control Refrigerator Exterior moisture Light Model and serial

control number label

Ice cube

. .. . . . t

Leveling rollers

(not shown) Bask grille

NO-FROST

REFRIGERATOR-FREEZERS

ED22DK ED22RK

Contents

Page

Important Safety Instructions.. ......................... 3

Before Using Your Refrigerator.. ..................... .4

Using Your Refrigerator .................................. 5

Setting the controls ........................................ .5

Changing the control settings.. ........................ 5

Exterior moisture control ................................. 6

Adjusting the refrigerator shelves.. ................. .6

Adjusting the door bins ................................... 6

Adjusting the door bin glides .......................... 6

Removing the crispers and crisper cover ...... .7

Adjusting the crisper humidity control ........... .7

Removing the meat drawer and cover .......... .7

Adjusting the meat drawer temperature ......... .

Removing the snack bin ................................. 8

Removing the freezer shelves ....................... .8

Removing the freezer bin ................................ 8

Changing the light bulbs.. ............................... .9

Removing the base grille ................................. 9

Ice cube trays ............................................... IO

Optional automatic ice maker ....................... 10

Sounds you may hear ................................... 11

Energy saving tips.. ....................................... 11

Cleaning Your Refrigerator.. ........................... 12

Food Storage Guide ...................................... 13

Storing fresh food .......................................... 13

Storing frozen food ........................................ 13

Caring For Your Refrigerator.. ....................... .15

Vacation and moving care ............................. 15

Power interruptions ....................................... 15

If You Need Service Or Assistance .............. 16

Whirlpool Refrigerator Warranty ................. .20

0 1991 Whirlpool Corporation

Remove the consumer Buy Guide Label, tape and

any inside labels (except model and serial number

label) before using the refrigerator.

To remove any remaining glue:

. Rub briskly with thumb to make a ball, then

remove.

Soak area with liquid hand dishwashing

detergent before removing glue as described

ahove. Do not use sharp instruments, rubbing

alcohol, flammable fluids or abrasive cleaners.

These can damage the material. See “Important

Safety Instructions” on page 3.

NOTE: Do not remove any permanent instruction

labels inside your refrigerator. Do not remove the

Tecl Sheet fastened under the refrigerator at the

front.

Thank you for buying a Whirlpool appliance.

Please complete and mail the Owner Registra-

tion Card provided with this product. Then

complete the form below. Have this information

ready if you need service or call with a question.

. Copy model and serial numbers from label (see

diagram on front cover) and purchase date from

sales slip.

Keep this book and sales slip together in a

handy place.

Model Number

Serial Number

Purchase Date

Service Company Phone Number

ImportantSafetyInstructions

To reduce the risk of fire, electrical shock, or injury when using your

refrigerator, follow basic precautions including the following:

Read all instructions before using the

refrigerator.

Child entrapment and suffocation are not

problems of the past. Junked or aban-

doned refrigerators are still dangerous ...

even if they will “just sit in the garage a

few days.”

If you are getting rid of your old refrigera-

tor, do it safely. Please read the enclosed

safety booklet from the Association of

Home Appliance Manufacturers. Help

prevent accidents.

Never allow children to operate, play with,

or crawl inside the refrigerator.

Never clean refrigerator parts with

flammable fluids. The fumes can create a

fire hazard or explosion.

* FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE OR

OTHER FLAMMABLE VAPORS AND

LIQUIDS IN THE VICINITY OF THIS OR ANY

OTHER APPLIANCE. THE FUMES CAN

CREATE A FIRE HAZARD OR EXPLOSION.

It is your responsibility to be sure your

refrigerator:

is installed and leveled on a floor that will

hold the weight, and in an area suitable for its

size and use.

is connected only to the proper kind of outlet,

with the correct electrical supply and ground-

ing. (Refer to the Electrical Requirements

and Grounding Instruction Sheet.)

is used only to do what home refrigerators

are designed to do.

is not near an oven, radiator or other heat

source.

is properly maintained.

is out of the weather.

is used in an area where the room tempera-

ture will not fall below 55°F

(13°C).

is not used by anyone unable to operate it

properly.

is not loaded with food before it has time to

get properly cold.

- SAVE THESE INSTRUCTIONS -

BeforeUsingYourRefrigerator

3-prong grounding

type wall receptacle

Flefrigerato

power cord

3-proAg

grounding plug

Right to raise;

left to lower

Use screwdriver

Clean it

Clean your refrigerator before using it. See

cleaning instructions on page 12.

Plug it in

Recommended Grounding Method

115

Volt, 60 Hz., AC only 15 or 20 ampere

fused and properly grounded electrical supply is

required. It is recommended that a separate

circuit serving only this appliance be provided.

Use a receptacle which cannot be turned off with

a switch or pull chain. Do not use an extension

cord.

See Electrical Requirements and Grounding

Instructions Sheet in your Literature Package.

Install properly

Allow l/2 inch (1.25 cm) space on each side

and at the top of the refrigerator or ease of

installation.

2. If the refrigerator is to be against a wall, you

might want to leave extra space on the hinge

side closest to the wall so the door can be

opened wider.

3. The refrigerator back can be flush against the

wall.

4. If your refrigerator has an ice maker, make

sure ice maker water supply has been

connected. Refer to Installation Instructions.

Level refrigerator-freezer

Remove the base grille. (See page 9.)

2. To raise front, turn screw in direction shown.

3. To lower front, turn screw in direction shown.

4. Check with level.

5. Replace base grille. (See page 9.)

Leveling screw

UsingYourRefrigerator

Setting the controls

Controls for the refrigerator and freezer are in the

refrigerator. To adiust a control, turn knob. When

the refrigerator is plugged in for the first time:

1. Set the refrigerator Control to 3.

2. Set the Freezer Control to B.

Give the refrigerator time to cool down com-

pletely before adding food. (This may take

several hours.)

These settings should be right for normal

household refrigerator usage.

The controls will be set about right when milk

or juice is as cold as you like and when ice

cream is firm.

Refrigerator Control adjustments range from

1 to 5. Freezer Control adjustments range from

AtoC.

Changing the control settings

If you need to adjust temperatures in refrigerator

or freezer, use the settings listed in the chart

below as a guide. If you have questions, call our

Consumer Assistance Center number. (See

page 16.)

Adjust the Refrigerator Control first.

Wait at least 24 hours between adjustments.

Then adjust the Freezer Control if needed.

RECOMMENDED

CONDITION: REASON: CONTROL SElTINGS:

If Refrigerator

Section is

TOO WARM

If Freezer

Section is

TOO WARM

Door opened often

Large amount of food added

Room temperature too warm

Door opened often

Large amount of food added

Very cold room temperature

(can’t cycle often enough)

Refrigerator 4

Freezer A

Refrigerator

Freezer

If Refrigerator

Section is

TOO COLD

Controls not set correctly Refrigerator 2

for your conditions Freezer B

If ICE isn’t

MADE FAST

ENOUGH

If BOTH

SECTIONS

are TOO WARM

Heavy ice usage

Very cold room temperature

(can’t cycle of-ten enough)

Door opened often

Large amount of food added

Very warm or very cold room

temperatures

Refrigerator 3

Freezer C

Refrigerator 4

Freezer B

Using Your Refrigerator

Contmued

Exterior moisture control

The Exterior Moisture Control on the Control

Console operates electric heaters around the

door openings. These heaters help keep

moisture from forming on the outside of the

refrigerator.

1. Use the OFF setting when humidity is low.

2. Use the ON setting if moisture forms on the

outside of the refrigerator.

Adjusting the refrigerator shelves

Shelves can be adjusted to match the way you

use your refrigerator. Glass shelves are strong

enough to hold bottles, milk and other heavy food

items.

To remove the glass shelves:

1. Remove items from shelf.

2. Slide shelf out with an even, constant pull to

the stop.

Be careful when

handling glass items.

3. Lift front and slide out the rest of the way.

To move shelf guides to new position:

1. Lift front of guide. Pull guide forward off rear

support. Repeat for other guide.

2. To replace guide, push guide onto rear

support. Push front of guide down onto

support.

To replace the glass shelves:

1. Guide rear of shelf info shelf guide.

2. Slide shelf into place.

Adjusting the door bins

To remove the door bins:

1. Lift bin up.

2. Pull bin straight out.

To replace the door bins:

1. Slide bin in above desired support button.

2. Push bin down until it stops.

NOTE: Large bins are designed to fit in the top

portion of refrigerator door only.

Adjusting the door bin glides

The door bin glides can be used to secure odd

shaped items or to separate other items.

1. Grasp glide.

2. Slide glide along bin.

Pull out to the stop,

lift the front

and pull again.

Removing the crisper and crisper cover

To remove the crispers:

1. Slide the crisper straight out to the stop.

2. Lift the front.

3. Slide out the rest of the way.

4. Replace in reverse order.

To remove the cover:

1. Remove full-width crisper.

2. Lift front of cover off supports.

3. Lift cover out by pulling up and out.

To replace the cover:

1. Fit back of cover into notch supports on walls

of refrigerator.

2. Lower into place.

3. Replace full-width crisper.

NOTE: Glass cover will fit above full-width crisper

only. Crisper(s) must be removed before remov-

ing cover.

Lift the cover

fror

it, then

the back.

Pull out to the stop,

lift the front and

pull again.

Adjusting the crisper humidity control

You can control the amount of humidify in the

moisture-sealed crispers.

The control can be adjusted to any setting

between LOW and HIGH.

LOW (open) lets moist air out of the crisper for

best storage of fruits and vegetables with

skins.

HIGH (closed) keeps moist air in the crisper

for best storage of fresh, leafy vegetables.

Removing the meat drawer and cover

To remove the meat drawer:

1. Slide the meat drawer out to the stop.

2. Lift the front.

3. Slide out the rest of the way.

4. Replace in reverse order.

To remove the cover:

1. Remove meat drawer and crispers.

2. Lift front of cover off supports.

3. Lift cover out by pulling up and out.

To replace the cover:

1. Fit back of cover into notch supports on walls

of refrigerator.

2. Lower into place.

3. Replace meat drawer and crispers.

Using Your Refrigerator

Contmued

Use

control to

adjust meat drawer

temperature.

Adjusting the meat drawer temperature

Cold air flows against the meat drawer through

an opening between the freezer and the refrig-

erator. This helps keep the meat drawer colder

than the rest of the refrigerator.

Slide the control to let more cold air through.

Removing the snack bin

To remove the snack bin:

1. Slide snack bin straight out to the stop with an

even, constant motion.

2. Lift the front.

3. Slide bin out the rest of the way.

4. Replace in reverse order.

Pull out to the stop,

lift the front and pull

again.

- Removing the freezer shelves

The freezer shelves can be removed for easier

cleaning.

To remove the shelves:

1. Lift right side of shelf off supports.

2. Slide shelf out of shelf support holes.

3. Replace in reverse order.

Removing the freezer bin

For proper air movement, keep the freezer bin in

place when the refrigerator is operating.

To remove the bin:

1. Slide bin out to the stop.

2. Lift the front to clear the stop.

3. Slide out the rest of the way.

To replace the bin:

Place bin on the slides.

2. Make sure the stops clear the front of the

slides.

3. Slide bin in.

Refrigerator light

Condenser coils

Changing the light bulbs

Electrical Shock Hazard

Before removing a light bulb, either unplug

the refrigerator or disconnect the electric-

ity leading to the refrigerator at the main

power supply. Failure to do so could result

in electrical shock or personal injury.

To change the refrigerator light:

1. Disconnect refrigerator from power supply.

2. Reach behind the Control Console to find

bulb.

3. Remove bulb.

4. Replace with a 40.watt tubular appliance bulb.

5. Reconnect power supply.

To change the crisper light:

1. Disconnect refrigerator from power supply.

2. Pull top of light shield forward until it snaps

free.

3. Lower light shield to clear bottom supports.

4. Pull light shield straight out to remove.

5. Replace with a 40.watt appliance bulb.

6. Replace light shield in reverse order.

7. Reconnect power supply.

To change the freezer light:

1. Disconnect refrigerator from power supply.

2. Push in sides of light shield until it snaps free.

3. Replace bulb with a 40-watt appliance bulb.

4. Replace the light shield.

5. Reconnect power supply.

NOTE: Not all appliance bulbs will fit your

refrigerator. Be sure to replace bulb with one of

the same size and shape.

Removing the base grille

To remove the grille:

1. Open the doors.

2. Pull grille out.

3. Do not remove Tech Sheet fastened behind

grille.

To replace grille:

1. Line up grille support tabs with metal clips.

2. Push firmly to snap into place.

3. Close the doors.

See cleaning instructions for defrost pan and

condenser coils on page 12.

Using Your Refrigerator

Contmued

Raise

signal

arm to

stop ice.

Lower

signal

arm to

start it.

Ice cube trays

If cubes are not used, they may shrink. The

moving cold atr starts a slow evaporation. The

longer cubes are stored, the smaller they get.

To remove ice:

1. Hold tray at both ends.

2. Twist slightly.

Optional automatic ice maker

If you have the automatic ice maker accessory

(Part No. ECKMF-90), or if you plan to add one

later, there are a few things you will want to

know:

The ON/OFF lever is a wire signal arm.

Down for making ice automatically.

Up to shut off the ice maker.

NOTE: Do not turn ice maker on until it is

connected to the water supply. Instructions

for ice maker water su~plv hook-up are

attached to the back of the refriaerator

cabinet.

The dial or lever on the side of the ice maker

changes the size of the cubes.

Shake the bin occasionally to keep cubes

separated, and to obtain increased storage

capacity.

9 It is normal for ice crescents to be attached by

a corner. They will break apart easily.

. You will hear water running when ice maker is

working. You’ll hear ice fall into the bin. Don’t

let these sounds bother you.

. The ice maker will not operate until the freezer

is cold enough to make ice. This can take

overnight.

Because of new plumbing connections, the first

ice may be discolored or off-flavored. Discard

the first few batches of ice.

If ice is not being made fast enough and more

ice is needed, turn the Refrigerator Control

toward a higher number. Wait a day and, if

necessary, turn the Freezer Control toward C.

If you remove the ice bin, raise the signal arm

to shut off the ice maker. When you return the

bin, push it all the way in and lower the arm to

the ON position.

If cubes are stored too long, they may develop

an off flavor like stale water. Throw them

away. Ice maker will make new ice. Cubes in

the ice bin can also become smaller by

evaporation.

Good water quality is important for good ice

quality. It is not recommended that the ice

maker be connected to a softened water

supply. Water softener chemicals such as salt

from a malfunctioning softener can damage the

ice maker mold and lead to poor quality ice. If a

softened water supply cannot be avoided, then

it is important that the water softener be well

maintained and operating properly.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Whirlpool Kühlschrank Handbücher

Whirlpool

Whirlpool EDI9MT Bedienungsanleitung

Whirlpool

Whirlpool ETl4CC Bedienungsanleitung

Whirlpool

Whirlpool GB2FHDXW - 7-27-09 Bedienungsanleitung

Whirlpool

Whirlpool WF2B220RPS Installationsanleitung

Whirlpool

Whirlpool GC5SHGXKB00 Bedienungsanleitung

Whirlpool

Whirlpool GC3SHAXVS - 23.1 cu. ft Montageanleitung

Whirlpool

Whirlpool W8TXNGZBB Montageanleitung

Whirlpool

Whirlpool ED5FHAXVA00 Bedienungsanleitung

Whirlpool

Whirlpool TT14DKXEW13 Montageanleitung

Whirlpool

Whirlpool ARC 1872 IX Bedienungsanleitung

Whirlpool

Whirlpool ET1MHKXMB03 Bedienungsanleitung

Whirlpool

Whirlpool WNF8 Series Bedienungsanleitung

Whirlpool

Whirlpool ES5DVAXW Bedienungsanleitung

Whirlpool

Whirlpool ETl2EC Bedienungsanleitung

Whirlpool

Whirlpool ARG 733/A+ Technische Daten

Whirlpool

Whirlpool ART 889 H Bedienungsanleitung

Whirlpool

Whirlpool Gold GI0FSAXV Stücklistenhandbuch

Whirlpool

Whirlpool ARC 4020 Bedienungsanleitung

Whirlpool

Whirlpool GX2FHDXVB - 22.0 cu. Ft. Refrigerator Montageanleitung

Whirlpool

Whirlpool WSR25D2RYY00 Bedienungsanleitung

Whirlpool

Whirlpool SideKicks EL88TRRWQ Bedienungsanleitung

Whirlpool

Whirlpool WT1020Q Bedienungsanleitung

Whirlpool

Whirlpool ET6WSKXSQ01 Bedienungsanleitung

Whirlpool

Whirlpool ET8AHKXRQ01 Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung