White Rodgers Comfort-Set 1F95-371 Bedienungsanleitung

Thank you for purchasing

your new Comfort-Set 90

Series thermostat. Your new

White-Rodgers thermostat

uses solid state micro-

computer technology to

provide precise time/tem-

perature control. This ther-

mostat offers the flexibility

to design heating and cooling

programs that fit your needs.

Adaptable to most 24 volt

residential forced air, multi-

stage (1F95-377 or 1F95-371)

or heat pump systems with

electric or fossil fuel auxil-

iary (1F95-377 or 1F94-371).

You will find information

about thermostat buttons and

display in the component

section beginning on page 2.

Instructions for optional

thermostat configuration

begin on page 4. Program-

ming information begins on

page 7. Descriptions of the

thermostat's features begin

on page 13.

We have also added thumb

tabs to help you find sections

of the manual.

THE THERMOSTAT BUTTONS

See inside front cover for illustration

showing button locations.

O(Blue arrow) Lowers temperature

setting (45°F or 7°C minimum)

O(Red arrow) Raises temperature

setting (99°F or 37°C maximum)

O The multi-color indicator glows:

green for 1st stage, yellow for 2ndstage,

red for emergency heat and flashing

red for malfunction condition in

system.

This button (on top of the cover)

lights the display.

OUsed to initiate or review thermo-

stat programming or advance to next

program period in programming mode.

OUsed with TIME _/TIME

to set the clock.

Used to adjust the time backward,

or to select the previous menu item.

Used to adjust the time forward, or

to select the next menu item.

0Used with TIME _/TIME

to set the current day.

_) Used to advance operation to the

next program period or advance to the

next day in programming mode.

Used to manually override

programming to hold at a selected

temperature.

Used to enter and configure the

VACATION mode.

_} Selects tan operation (see The

Display _ ). This button is also used

to program the ['an to mn continuously

during a program period.

Used to set the filter change-out

time, or to reset the filter change timer.

_} Sets the system mode (HEATing,

EMERgency (Heat Pump models

only), OFF, COOLing, or AUTO-

matic changeover).

_} Used to adjust the clock one hour

[brward or back.

Used to start or return to program

operation.

THE DISPLAY

(_) Displays system mode (HEAT,

EMER, OFF, COOL, AUTO,

HOLD, or VACA). During program-

ming displays the time period (MOR,

DAY, EVE, NHT) being pro-

gramme&. In the configuration menu,

the menu item name is shown, one

word at a time (PRGM MODE,

EMR, COOL FAN DELA OFF, etc.).

_) CHECK STAT appears when the

thermostat detects certain problems

within itsel£ CHECK SYSTEM

appears when the thermostat detects

certain problems in heating or cooling

the system.

i_) Indicates the length of time

remaining in a temporary hold

condition. Also indicates the length of

time remaining in VACATION mode.

i_ Displays FAN ON when the tan is

operating continuously. Displays FAN

AUTO when the tan cycles with the

heating or cooling system. Displays

PRG FAN ON when t:an is pro-

grammed to be on during a period.

i_ Displays the setpoint temperature.

i_ Alternately displays room

temperature and time of clay.

I_ Shows the current day of the week.

When programming, shows the day(s)

being programmed.

I_) The word HEAT or COOL will

appear above or below the setpoint if

area _) is needed to display other

information.

Figure 1. The Display

[IIIN!I_I!I_I

The configuration menus allow you to

set certain thermostat operating

characteristics to your system or

personal requirements.

To enter the User Configuration menu,

press PROGRAM _ to make sure

the thermostat is in the run program

mode, then press TIME _ and

TIME _ at the same time. The

display will show the first item in the

configuration menu.

The following charts (pages 5 & 6)

describe each item on the menus. Press

TIME _ to move forward to the

next item in the menu or TIME

to move backward to the previous

item. Set these according to your

personal preference using _ or

. To enter the Keypad Lock

menu, while in the User Menu, press

and hold TIME _ and TIME

for at least two seconds.

To exit either menu and retum to

normal operation, press PROGRAM

_. To re-enter to the User menu at

any time press PROGRAM _,

then press TIME _ and TIME

at the same time. While in the

menus, if you do not press any buttons

for two minutes, the thermostat will

revert to normal operation.

User Menu

Step Press Button(s) Displayed Press _ or _ to select: COMMENTS Ref

(Factory Default) Page

1TIME _ 0 °F 5 LO to Adjusts temperature display higher or lower. 13

and TIME _ (room temperature) 5 HI

at same time

for 2 seconds

2TIME _ EMR OFF Selects EMR option ON or OFF or L ON. 13

(ON) or ON L

3 TIME _ (°F) °C Adjusts temperature display to °F or °C. 14

4TIME _SET FAN 0 - 6 HRS Set Fan (one shot) option. Set the duration of a 14

(0) temporary fan option.

5TIME _ BEEP OFF Turns keypad beeper ON or OFF. 14

(ON)

6TIME _ HEAT FAST ON OFF delays starting second stage for economy. 14

(OFF) ON eliminates delay to energize second stage.

7TIME _ COOL FAST ON OFF delays starting second stage for economy. 14

(OFF) ON eliminates delay to energize second stage.

8 TIME _ TEMP OUT ON Enables outdoor temperature sensor. Requires

(OFF) optional remote sensor connected to terminal OT 14

and remote thermistor probe.

User Menu (Continued)

9 TIME _ FORE (icon) ON Telephone RUN program feature. Requires optional 15

(OFF) X10 system.

l0 TIME _ COMP RUN TIME (Compressor run time Shows accumulated time compressor has run. 15

(00) in hours) To reset to 00, press _ and _.

ii TIME ! AUX RUN TIME (AUXILIARY run time Shows accumulated time AUXILIARY has run. 15

(00) in hours) To reset to 00, press _ and _.

12 PROGRAM _Returns to normal operation.

Keypad Lockout Menu (access from User Menu)

Step Press Button(s) Displayed Press _ or _to select: (OMMENTS Ref

(Factory Default) Page

lTIME _ PART LOCK ON Partial Keypad lockout OFF or ON. 15

and TIME _(OFF)

(hold for two

seconds)

2TIME _LOCK ON Total Keypad lockout OFF or ON. 15

(OFF)

3PROGRAM _Returns to normal operation.

MANUAL OPERATION

Your Comfort-Set III thermostat can be

used to control temperature manually

(without programming). For manual

operation, press _ to select

HEAT or COOL, then press PRO-

GRAM _. Use _ or _ to

set the temperature as desired.

PROGRAMMED OPERATION

Planning Your Program

The sample schedule (page 9) shows

the factory installed programs tbr

heating and cooling. The heating and

cooling programs are separate, and

must be programmed individually. To

use the factory program, set the clock

and press PROGRAM _ with the

thermostat _ set to Heat, Cool,

or Auto.

Fill out the blank schedule (page 10)

with the time and temperatures you

want in your program. Fill in every

space for your program.

The same temperature can be repeated

more than once if you do not want the

temperature to change over several

time periods.

Entering Your Program

To Set the Clock:

1. Press PROGRAM _.

2. Press SET _. The display will

show the hour. Use TIME _ or

TIME _ to set to the current hour

and AM/PM designation.

3. Press SET _ again. The

display will show minutes. Use TIME

or TIME _ to set to the

current minutes.

4. Press PROGRAM _.

To Set the Day:

5. Press SET _. The display will

indicate a day of the week. Use TIME

or TIME _ to set to the

current day of the week.

6. Press PROGRAM _.

To Set the Program:

7. Press _to select HEAT (for

heating program) or COOL (for

cooling program).

8. Press PROGRAM _ one time.

The display will show MOR, the

settings for time and temperature and

MON.

9. If you program Monday the first

time you press PROGRAM _ it

will be copied to the rest of the week.

To program the other days of the week

press _/DAY to until you reach

the day you wish to change and follow

Steps 10, 11 & 12. You can also copy

the program from one day to another.

To copy, press _/COPY. The

display will show COPY, and all the

other days of week will be flashing.

Press _/COPY again to copy the

day in to the rest of the week or press

TIME _ or TIME _ until

you reach the day you want to copy to

and press _/COPY.

10.Press TIME O or TIME

to set the time on the display as

selected in your HEATING or

COOLING SCHEDULE. Be sure to

check the AM or PM on the display.

11. Press the red _ or blue

key to adjust the temperature to match

your schedule. If you want the fan ON

continuously during this period, press

time and temperature for this period.

13.Press PROGRA_M _ to

continue through the entire schedule,

entering time and temperature for each

period. When you are satisfied that

your program matches your schedule,

press PROGRAM _. Program-

ming is now complete [br this mode

and your program is running.

14.To program the other mode, repeat

the procedure from step 6.

12.Press PROGRAM _ one time.

NOR on the display will change to

DAY. Repeat steps 10 and 11 to enter

7-Day Sample HEAT Program Schedule

(Shows factory programming)

MON 6:00 AM

TUE 6:00 AM

WED 6:00 AM

THU 6:00 AM

FRI 6:00 AM

SAT 6:00 AM

SUN 6:00 AM

OMorning (MOR)

ODay (DAY)

Evening (EVE)

_]} Night (NHT)

Start Time

Temperature

OOOO

O O O O O O O O

70°F (21°C) 8:00 AM 62°F (16°C) 5:00 PM 70°F (21°C) 10:00 PM 62°F (16°C)

7-Day Sample COOL Program Schedule

(Shows factory programming)

MON 6:00 AM

TUE 6:00 AM

WED 6:00 AM

THU 6:00 AM

FRI 6:00 AM

SAT 6:00 AM

SUN 6:00 AM

OMorning (MOR)

ODay (DAY)

Evening (EVE)

_]} Night (NHT)

Start Time

Temperature

OOOO

O O O O O O O O

78°F (25°C) 8:00 AM 85°F (29°C) 5:00 PM 78°F (25°C) 10:00 PM 82°F (27°C)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere White Rodgers Thermostat Handbücher

White Rodgers

White Rodgers 179 Bedienungsanleitung

White Rodgers

White Rodgers UP310 Bedienungsanleitung

White Rodgers

White Rodgers 1C20 Bedienungsanleitung

White Rodgers

White Rodgers 37-1406-1 Bedienungsanleitung

White Rodgers

White Rodgers Astro Stat Bedienungsanleitung

White Rodgers

White Rodgers 1F90W-51 Bedienungsanleitung

White Rodgers

White Rodgers 1F97W-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F97-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F92W-71 Bedienungsanleitung

White Rodgers

White Rodgers 1E30-373 Bedienungsanleitung

White Rodgers

White Rodgers 1F57-312 Bedienungsanleitung

White Rodgers

White Rodgers UP400 Verdrahtungsschema

White Rodgers

White Rodgers 1F90W-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F89-11 Bedienungsanleitung

White Rodgers

White Rodgers TYPE 152 Bedienungsanleitung

White Rodgers

White Rodgers 1F97-1277 Bedienungsanleitung

White Rodgers

White Rodgers 1F92 Bedienungsanleitung

White Rodgers

White Rodgers 1F96 Series Bedienungsanleitung

White Rodgers

White Rodgers 1F58 Bedienungsanleitung

White Rodgers

White Rodgers 1F95-71 Bedienungsanleitung

White Rodgers

White Rodgers 1E78-140 Bedienungsanleitung

White Rodgers

White Rodgers 1D56 Bedienungsanleitung

White Rodgers

White Rodgers 1E78 Bedienungsanleitung

White Rodgers

White Rodgers 1F81-261 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung