Wilson Electronics BD800AM Bedienungsanleitung

Rev 1.1

11/26/2002

USER’S GUIDE

FOR THE

BD800AM: AMPS MOBIL

BI-DIRECTIONAL

AMPLIFER/REPEATER

MODEL: BD800AM

Rev 1.1 PAGE 2

The information provided by Wilson Electronics, Inc. is believed to be complete and

accurate. However, no responsibility is assumed by Wilson Electronics, Inc. for any

business or personal losses arising from its use, or for any infringements of patents or

other rights of third parties which may result from its use.

FCC ID: PWOBD800AM

Rev 1.1 PAGE 3

1. PACKAGE CONTENTS

1.1 Amplifier/Repeater

1.2 12V Car Adapter

1.3 Low Profile Antenna (Inside Antenna)

1.4 (Outside Antenna Sold Separately) 800 MHz Magnet Mount Shown

OUTSIDE ANTENN

NOT INCLUDED

Rev 1.1 PAGE 4

2. AMPLIFIER

2.1 About

The Amplifier greatly improves signal strength when using your portable

AMPS phone inside the car. The signal is received by the outside antenna

from the cell site. It is then AMPLIFIED/REPEATED and then transmitted to

your AMPS phone through the inside antenna. When the phone transmits it is

received by the inside antenna. It is then AMPLIFIED/REPEATED and then

transmitted to the cell site through the outside antenna.

2.2 Specifications:

FREQUENCY: 824-849 MHZ UPLINK 869-894 MHZ DOWNLINK

GAIN: 37 DB UPLINK 37 DB DOWNLINK

FLATNESS: + - 2DB

MAX RF OUTPUT POWER: UPLINK 1.86 W DOWNLINK 0.074W

NOISE FIGURE: 6DB @894MHZ

UPLINK DOWNLINK ISOLATION: > 90 DB

POWER CONSUMPTION: 12V, .5Amps

CONNECTOR: 2-FME-Male 50 OHMS

DIMENSIONS: 5.5 x 4.3 x 1.4 (INCHES) OR 14.0 x 10.8 x 3.5(CM)

WEIGHT: 1.32 POUNDS OR 600G

Rev 1.1 PAGE 5

3. AMPLIFIER/REPEATER INSTALLATION (REFER TO ILLUSTRATION)

3.1 Installing the Outside Antenna (800 MHz Magnet Mount) [Sold Separately]

3.1.1 Select a location on the roof: Try to keep Antenna centered on the car

roof.

3.1.2 The Outside Antenna should be located in an area with at least a 12”

(30cm) radius clear of obstructions, and other radiating elements.

NOTE: When using a magnet mount or trucker antenna, keep the

separation distance between the inside and outside antennas at least 4ft.

When using a glass mount antenna, keep the separation distance between

the inside and outside antennas at least 5ft.

WARNING: The outside antenna used with this amplifier must be

mounted with a separation distance of at least 8 inches from all persons

and must not be co-located or operating in conjunction with any other

antenna or amplifier.

ILLUSTRATION

4 ft of separation

Rev 1.1 PAGE 6

3.2 Installing The Amplifier/Repeater

3.2.1 Mount the AMPLIFIER/REPEATER under the dash or car seat.

3.2.2 Connect the Outside Antenna to the AMPLIFIER/REPEATER side

labeled “OUTSIDE ANTENNA”.

NOTE: The amplifier should be mounted to the selected location using

mounting screws.

3.3 Installing The Inside Antenna

3.3.1 Connect the Inside Antenna to the side labeled “INSIDE ANTENNA” on

the AMPLIFIER/REPEATER.

3.3.2 The Inside Antenna should be centered in the vehicle. It can be placed in

the seat back between the seat cushion and fabric or in the vehicle

headliner.

WARNING: The inside antenna used with this amplifier must be mounted

with a separation distance of at least 8 inches from all persons and must

not be co-located or operating in conjunction with any other antenna or

amplifier.

Rev 1.1 PAGE 7

Inhaltsverzeichnis

Andere Wilson Electronics Verstärker Handbücher

Wilson Electronics

Wilson Electronics U-Booster 2B5225 Bedienungsanleitung

Wilson Electronics

Wilson Electronics WilsonPro ENTERPRISE A8000 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 801230 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 801105 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 801306 Bedienungsanleitung

Wilson Electronics

Wilson Electronics PRO 710i Bedienungsanleitung

Wilson Electronics

Wilson Electronics 811101 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 271265 Bedienungs- und Wartungsanleitung

Wilson Electronics

Wilson Electronics 271245 Bedienungsanleitung

Wilson Electronics

Wilson Electronics Smart Technology 801201-A Bedienungsanleitung

Wilson Electronics

Wilson Electronics IoT 5-Band Bedienungsanleitung

Wilson Electronics

Wilson Electronics PRO 710i Bedienungsanleitung

Wilson Electronics

Wilson Electronics 271220 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 801247 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 814001 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 271247-75 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 271247-50 Bedienungsanleitung

Wilson Electronics

Wilson Electronics SIGNALBOOST 811210 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 271245 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 271245 Bedienungsanleitung

Wilson Electronics

Wilson Electronics SIGNALBOOST MobilePro Bedienungsanleitung

Wilson Electronics

Wilson Electronics WILSONPRO ENTERPRISE 1300 Bedienungsanleitung

Wilson Electronics

Wilson Electronics 271247-75 Bedienungsanleitung

Wilson Electronics

Wilson Electronics iDEN Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung