Windrock 6400 Bedienungsanleitung

6400 Portable Analyzer

Reference Manual

Rev. 1.3

7/24/2017

Windrock, Inc. 1832 Midpark Road, Suite 102 Knoxville, TN 37921

Phone: 865.330.1100

Fax: 865.330.1101

www.windrock.com

Table of Contents

Why an Analysis Program? ........................................................................................................................2

Goals..........................................................................................................................................................2

Engine Data Collection Locations...............................................................................................................3

Compressor Data Collection Locations.......................................................................................................4

Batteries and Charging...............................................................................................................................7

6400 Analyzer ............................................................................................................................................8

Adjusting Analyzer Screen Brightness......................................................................................................10

Adjusting Analyzer Date/Time ..................................................................................................................11

Encoder / Wireless Transmitter.................................................................................................................12

Encoder / Wireless Transmitter Functions ................................................................................................14

Selecting a Wireless Transmitter Channel................................................................................................20

Magnetic Pickup / Optical Sensor.............................................................................................................21

Cables......................................................................................................................................................22

Strobe (Timing) Light................................................................................................................................23

Engine Pressure Transducer....................................................................................................................24

Compressor Pressure Transducer............................................................................................................25

Pressure Transducer Calibration (Zeroing the Sensor).............................................................................26

Primary Ignition ........................................................................................................................................27

Secondary Ignition....................................................................................................................................28

Accelerometer..........................................................................................................................................29

Velocity Probe..........................................................................................................................................30

Ultrasonic / Infrared Temperature.............................................................................................................31

Ultrasonic Gain Adjustment......................................................................................................................32

Headphones.............................................................................................................................................34

/VA Kit Additional Items............................................................................................................................37

6400 Reference Manual

Why an Analysis Program?

The purpose of any Analysis Program is to assemble quality systems and personnel to perform regular

assessments of the condition and performance of the operation’s equipment assets.

Testing and analysis, when performed with consistency and regularity, can be a valuable tool for helping

predict and pinpoint mechanical or other problems that may be occurring within a process system to help

reduce costly down or offline time as well the repair or replacement of mechanical parts or components.

Goals

The analyzer is used to take measurements relating to vibration, ultrasonic, pressure, ignition, and temperature

for comparing the findings with predicted results to determine where problems may be, or about to be,

occurring on a machine. Things we are looking for might include:

Engine Assessments:

Condition Measurements and Items of Concern:

•Detonation

•Misfires

•Firing Pressure Imbalance

•Leaking Valves and Rings

•Worn or Scored Liners

•Primary and Secondary Ignition

•Turbo Charger Issues

Performance Measurements and Items of Concern:

•Combustion

•Fuel Consumption

•Horsepower

•Efficiency

Compressor Assessments:

Condition Measurements and Items of Concern:

•Leaking Valves and Rings and Packing

•Rider Band Wear

•Crosshead Wear

•Liner Damage

•Excessive Frame Vibration

•Lack of Rod Reversal

•Foundation or Grout Damage

•Looseness

Performance Measurements and Items of Concern:

•Horsepower

•Capacity

•Efficiency

•Valve Dynamics

•Gas Pulsations

6400 Reference Manual

Engine Data Collection Locations

Engine Data Collection Point Examples

6400 Reference Manual

Compressor Data Collection Locations

Compressor Pressure and Infrared Data

6400 Reference Manual

Compressor Vibration Data

6400 Reference Manual

Compressor Ultrasonic Data

6400 Reference Manual

Batteries and Charging

The 6400 analyzer kit comes standard with two different sized batteries. The analyzer uses the large battery,

while the encoder / wireless transmitter & strobe (timing) light use the smaller battery.

Note: Both batteries utilize the same battery charger that is provided with the 6400 analyzer kit.

6400 Analyzer Battery Removal and Installation:

•On the back of the analyzer use a coin to turn

the locking mechanism counterclockwise to

unlock the battery door.

•Replace the battery with a charged battery.

•Close the door and relock.

Note: Using the lowest analyzer screen brightness

level without making the screen hard to see for the

user will extend battery life.

Encoder / Wireless Transmitter Battery Removal

and Installation:

•Slide the door open on the side of the

encoder.

•Pull the tag on the battery to remove it.

•Replace with a charged battery.

•Close the door.

•Once a new battery is installed the encoder

will automatically turn on.

Note: To save battery life remove this battery while

the encoder is not in use.

Strobe (timing) light Battery Removal and

Installation:

•Unthread the back cover and pull the

connector straight out of the timing light.

•Pull tag to remove the battery from the

housing.

•Install a new battery.

•Replace plug and connector.

•Rethread on back cover. The cover does not

need to be extremely tight.

6400 Reference Manual

6400 Analyzer

The analyzer is used to measure voltage or mA signals coming from a sensor or transducer and translating it

into useful data by converting it into calculated values for determining the health and performance of the

machine being measured.

Windrock analyzers come in several configurations ranging in complexity depending upon the types of

machinery to be tested and data to be collected:

-6400 / CA 1-channel engine power cylinder balancer and ignition analyzer

-6400 / MA 2-channel reciprocating machinery maintenance analyzer

-6400 / DA 2-channel diesel engine analyzer

-6400 / PA 4-channel performance analyzer

-6400 / VA 4-channel vibration analyzer

Note: The MA, DA, and PA have the capability to add the VA (vibration) option to their current configuration

which provides additional vibration (FFT) data collection capabilities.

Note: The number of channels and options your analyzer has available will vary based on the specific model of

analyzer that you have.

6400 Reference Manual

Inhaltsverzeichnis

Andere Windrock Messgerät Handbücher

Windrock

Windrock Spotlight A3910 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung