Winegard HD7080P Bedienungsanleitung
Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601-2000
WARNING
INSTALLATION OF THIS ANTENNA NEAR POWER LINES IS DANGEROUS.
FOR YOUR SAFETY, FOLLOW THE INSTALLATION INSTRUCTIONS.
High Denition (HD)
Platinum Antennas
Winegard Company warrants this Winegard product against any defects in materials or work-
manship within 90 (ninety) days from date of purchase. No warranty claim will be honored unless
at the time the claim is made, you present proof of purchase to an authorized Winegard dealer (if
unknown, please contact Winegard Company, 3000 Kirkwood Street, Burlington, IA 52601-2000,
Telephone 800-288-8094).
Winegard Company (at its option) will either repair or replace the defective product at no charge
to you. This warranty covers parts, but does not cover any costs incurred in removal, shipping or
reinstallation of the product. This limited warranty does not apply if the product is damaged, deterio-
rates, malfunctions or fails from: misuse, improper installation, abuse, neglect, accident, tampering,
modication of the product as originally manufactured by Winegard, usage not in accordance with
product instructions or acts of nature such as damage caused by wind, lightning, ice or corrosive
environments such as salt spray and acid rain.
The 90 Day Warranty is provided on the condition that the equipment is properly delivered with all
handling and freight charges prepaid to your Winegard dealer for return to our factory for repair or
replacement. Winegard dealers will arrange for the replacement or repair and return to you without
charge the product which failed due to defective material or workmanship.
WINEGARD COMPANY WILL NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES,
EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY ARE
LIMITED TO THE 90-DAY PERIOD OF THIS WARRANTY.
The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort or
otherwise, and Winegard shall not be liable for incidental or consequential damage or commercial
loss, or from any other loss or damage except as set forth above.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of
limitation of incidental or consequential damages, so the above limitations or exclusions may not
apply to you.
This warranty gives you specic legal rights and you may also have other rights which vary from
state to state.
Printed in U.S.A. © Winegard Company 2002 1450167 Rev1 10/10
INSTRUCTIONS
VHF/UHF MODELS
HD7080P, HD7082P
Rev. 2/08
POINT THIS END TOWARDS
STATIONS
POINT THIS END TOWARDS
STATIONS
VHF/UHF
MODEL HD7080P
VHF/UHF
MODEL HD7082P
HOW TO PROVIDE LIGHTNING
PROTECTION FOR TV ANTENNA
AND SET
Step 1. Mount the lightning arrestor
or 75 ohm coaxial grounding block
as close as possible to where the 75
ohm coaxial cable downlead enters
the house. See Figure 9.
Step 2. The ground wires for both
the mast and the downlead should
be copper or aluminum wire, number
eight (8) or larger. See Figure 9.
Step 3. The downlead wire from the
antenna to the lightning arrestor and
the mast ground wire should be se-
cured to the house, spaced from four
(4) to six (6) feet apart. See Figure 9.
NOTE: In the case of a “ground up”
antenna installation, it may not be
necessary to ground the mast if the
mast extends four or more feet int the
earth. Consult a TV serviceman for
the proper depth in your location.
Fig. 9
HD7080P
HD7080P
90 DAY LIMITED WARRANTY
Antenna Lead
In Wire
Ground
Clamp
Electric
Service
Equipment
Antenna
Discharge Unit
(NEC Section 810-20)
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
Ground
Clamps
Grounding Conductors
(NEC Section 810-21)
NEC - National Electrical Code
Example of antenna grounding as per
National Electrical Code, ANSI/NFPA 70
(May substitute a 75 ohm
Coax Grounding Block)
CARTRIDGE HOUSING
RECEPTACLE
75 OHM COAXIAL
CABLE (DOWNLEAD)
BOOT
COLLAR
CARTRIDGE
HOUSING
DOWNLEAD
JACK
WEATHER BOOT
For Model HD7082P See Fig. 4
STEP 5. Unfold the elements of the
front section of the antenna. The
elements should be on the top side
of the front section of the antenna.
Remove the bolt, hex nut, and ele-
ment from the tapered end of the
front boom and slide the tapered end
into the front of the rear boom. The
cartridge housing receptacle on rear
section of the antenna is attached to
the bottom of the rear boom at the
factory. Replace bolt, hex nut, and
element, tighten securely.
Fig. 8
Fig. 6
Fig.5
STEP 8. To attach the cartridge hous-
ing to the antenna, align the snaps
on the cartridge housing with the
snap holes on the cartridge housing
receptacle on the antenna and push
the housing into the receptacle until it
snaps into place. See Figure 7.
STEP 9. Attach the 75 ohm coaxial
downlead cable to the “downlead”
connection on the cartridge housing.
See Figure 7. Slide weather boot
over connectors and boot collar.
STEP 10. Loosen nuts on the mast
clamp, slide the antenna over the end
of the mast. Point the front of
the antenna (small end) towards sta-
tions and tighten mast clamp secure-
ly. See Figure 8.
STEP 11. The 75 ohm coaxial cable
downlead may be secured to the
mast by taping or by using plastic
wire ties. MASTING
2" OD MAX.
MAST CLAMP
MAST CLAMP
INSERT
HEX NUT
U-BOLT
Fig. 7
STEP 6. Unfold UHF directors. See
Figure 5.
STEP 7. Unfold the reector booms
slowly until they lock in place. Then
unfold the elements on the reector
booms. See Figure 6.
NOTE:
To prevent damage in shipping, the second set of elements from the rear of the
boom are folded to the opposite side.
STEP 1. Remove the rear section of antenna from carton (long elements). Lay
it on the ground with the end with the plug pointing toward you. Starting with the
element nearest you, unfold the rst element CLOCKWISE about 80° and click to
lock position. See Figure 1.
STEP 2. Grasp both ends of the second element from the rear of the boom. Lift
the ends of the element just enough to slide over the other elements and ROTATE
ABOUT 100° COUNTER CLOCKWISE to lock position. See Figure 1.
STEP 3. Unfold the rest of the elements on this side of the antenna to the lock
position, being sure to alternate the elements. See Figure 2.
STEP 4. Turn the antenna over and repeat steps 1, 2 and 3. Again lift and rotate
the second element just enough to slide over the other elements. See Figure 3.
Fig. 1 Model HD7080P
Antenna shown from top
side with front of rear sec-
tion pointing away from you.
Antenna shown from under-
side with front of rear section
pointing away from you.
Fig. 4
FRONT
BOOM
REAR
BOOM
MAIN
BOOM
REFLECTOR
BOOM
REFLECTOR
BOOM
ENDS OF CLIPS
SHOULD POINT AWAY FROM MAIN BOOM
Lift and
Rotate
Fig. 3 Model HD7080P
Fig. 2 Model HD7080P
Fig. 1 Model HD7082P Fig. 2 Model HD7082P Fig. 3 Model HD7082P
Antenna shown from top
side with front of rear sec-
tion pointing away from you.
Antenna shown from under-
side with front of rear section
pointing away from you.
Lift and
Rotate
Dieses Handbuch passt für folgende Modelle
1
Andere Winegard Antenne Handbücher
Winegard
Winegard Movin' View MV3500A Bedienungsanleitung
Winegard
Winegard HD-9095P Bedienungsanleitung
Winegard
Winegard SK-1000 Bedienungsanleitung
Winegard
Winegard TRAV'LER Series Bedienungsanleitung
Winegard
Winegard HD7000R Bedienungsanleitung
Winegard
Winegard Carryout G2+ Bedienungsanleitung
Winegard
Winegard YA-1713 Bedienungsanleitung
Winegard
Winegard Pathway X2 Bedienungsanleitung
Winegard
Winegard Rayzar.Air RVRZ25W Bedienungsanleitung
Winegard
Winegard SENSAR III ANTENNA Bedienungsanleitung
Winegard
Winegard MA1000W Bedienungsanleitung
Winegard
Winegard Movin' View MV-1111 Bedienungsanleitung
Winegard
Winegard RAYZAR RV-RZ20 Bedienungsanleitung
Winegard
Winegard YA-6260 Bedienungsanleitung
Winegard
Winegard Movin' View MV-4005 Bedienungsanleitung
Winegard
Winegard Movin' View MV-0500 Bedienungsanleitung
Winegard
Winegard A3-2000 Betriebsanleitung
Winegard
Winegard Carryout PM-2000 Bedienungsanleitung
Winegard
Winegard PR-8800 Bedienungsanleitung
Winegard
Winegard WX980 Bedienungsanleitung
Beliebte Antenne Handbücher anderer Marken
Alfa Network
Alfa Network APA-L01 Bedienungsanleitung
Naval
Naval PR-422CA Bedienungsanleitung
Feig Electronic
Feig Electronic ID ISC.ANTH200/200 Series Bedienungsanleitung
TERK Technologies
TERK Technologies TV44 Bedienungsanleitung
Directive Systems & Engineering
Directive Systems & Engineering DSE2324LYRMK Bedienungsanleitung
HP
HP J8999A Bedienungsanleitung
CommScope
CommScope CMAX-OMFX-43M-I53 Bedienungsanleitung
Ramsey Electronics
Ramsey Electronics DAP25 Bedienungsanleitung
COBHAM
COBHAM SAILOR 800 VSAT Gebrauchs- und Pflegehandbuch
Trango Systems
Trango Systems AD900-9 Bedienungsanleitung
Steren
Steren ANT-100 Bedienungsanleitung
Proxim
Proxim 5054-PA-23 Bedienungsanleitung