Winix ZERO+ AUS-1250AZPU Bedienungsanleitung
User Manual
Model
Use & Care
Guide
WINIX AIR CLEANER
ZERO+ (AUS-1250AZPU)
ˍPlease read and follow all safety rules and instructions
in this manual before operating.
ˍThe product warranty is printed on the back of this
guide, so please keep it in a safe place for future use.
ZERO+
English
CONTENTS
▶This product is suitable for 220 - 240 V only.
5-STAGE AIR PURIFICATION3
CONTROLS4
WHERE TO USE5
INSTALLING THE FILTERS6
SAFETY AND CAUTIONS8
INITIAL OPERATION9
AUTO AND SLEEP10
MANUAL MODE, TIMER AND PLASMAWAVE
®
11
CHILD LOCK, AIR QUALITY LED LIGHT12
FILTER CARE13
CLEANING THE DUST SENSOR17
CLEANING CARE18
FREQUENTLY ASKED QUESTIONS19
UNIT SPECIFICATIONS21
SAFETY INSTRUCTIONS22
PRODUCT WARRANTY 23
English ZERO+
5-STAGE AIR PURIFICATION
PlasmaWave
Deodorization lter
Pre-lter
True HEPA lter
Pet lter
1
2
3
4
5
Product User ManualPre-lter/
Deodorization lter/
True HEPA lter
Pet lter
English ZERO+
CONTROLS
Air Outlet Vent
PLASMAWAVE
Light Sensor
Detects the amount
of ambient light within
the environment,
to adjust the brightness
of the LED indicators.
Mode / Fan Speed Button
Every time the Mode button
is pressed, the Mode LED light
will cycle through the settings.
(Auto, Sleep, Low, Medium,
High, Turbo)
Child Lock Button
Press and hold for 3 seconds
to enable or disable
the Child Lock mode.
Timer Indicator
If timer has been set,
the LED light Indicates
the set time of operation.
Timer / Air Quality Button
Press to cycle through and set
desired length of operation
(1hr, 4hr, 8hr, [NO TIMER]).
Smart Sensor
Automatically
detects indoor
air quality.
Reset Button
After replacing a lter,
press the RESET button
for at least 5 seconds.
Power Button
Turns the unit on
or o.
Child Lock Indicator
LED light indicates whether
Child Lock mode is
enabled or disabled.
Check Filter Indicator
LED light indicates when it is
time to change the lter.
PlasmaWave
Indicator
Indicates whether
PlasmaWave® is
enabled or disabled.
PLASMAWAVE
PlasmaWave Button
Enables or disables
PlasmaWave®.
Press and hold for 3 seconds
to enable or disable the
Air Quality light.
English ZERO+
WHERE TO USE
Allow 30 ~ 45 cm of space between TVs, radios, and other electronic products
electromagnetic interference from certain electronics may cause product malfunction.
Place indoors away from direct sun light
direct exposure may cause product malfunction or failure.
Only place on hard, flat surfaces
flimsy or slanted surfaces may result in abnormal noise and vibrations.
30~45cm 10cm
WARNING Follow these instructions to reduce the risk of serious injury
or death and to reduce risk of damaging the unit.
Do not use around mist or fumes from
industrial oil or around large quantities of
metallic dust
Do not place around heating elements
Do not install in any sort of motor or
transport vehicle (trucks, boats, ships, etc.)
Do not place in an area with excessive
amounts of noxious gases
Do not place near any flammable
materials (aerosols, fuel, gases etc.) Do not have unit facing into wind or draft
Do not place below any electrical outlet Do not place in excessively humid areas
where unit may become wet
English ZERO+
This product comes with all of the required filters. The protective plastic wrap must be
removed from the filters before use.
※Operating the unit without removing the plastic wrap may result in product failure.
※Unplug and make sure the unit is turned off before installing filters.
※The unit will automatically power off when front panel is opened.
① Remove the front panel by grasping its
upper edge and gently pulling towards
yourself.
ˍTo remove the front panel, the latch at
the lower edge of the panel must be
released from its position.
Latch
② Remove the filters from the unit, they are
protected inside a plastic wrap.
③ Remove filters from protective plastic wrap.
ˍOperating the unit without removing
filters from plastic may cause abnormal
noise, deformation, or fire as a result of
overheating.
NOTE
ˍRefer to pages 13 - 16 for detailed information on filter care
and how to replace them.
INSTALLING THE FILTERS
English ZERO+
INSTALLING THE FILTERS
④ Install the filters until they fit securely in
place.
Filters must be installed in this order:
3 True HEPA filter (rear)
2 Deodorization filter (middle)
1 Pre-filter (front)
ˍTo install the pre-filter, insert bottom tabs
into the slots on either side of the lower part
of the unit, then rotate upward to insert the
upper tabs into the slots at the top part of
the unit until both sides audibly click into
place.
Deodorization
lter
True
HEPA lter
Pre-lter
⑤ Replace the front panel by first inserting
the latch at the bottom edge into the
base of the unit, then rotate the panel
upward toward the top of the unit until it
magnetically snaps closed.
Latch
⑥ When to service and replace filters:
Filter Indicator Light When to service When to replace
1 Pre-filter none Clean once every
14days Permanent
2 Deodorization filter
Can NOT be
WASHED
Lasts up to
12months
3 True HEPA filter
※ Intervals between filter replacement may vary depending on environment.
※For optimal use, Pre-filter can be cleaned every 14 days which can extend the life of
other filters.
※ Pet filter replacement guide separately mentioned on the Pet filter package board.
To purchase replacement Winix filters :
contact our authorized distributor
‘Ausclimate’ or visit the below web site.
ˍTEL : 1800 122 100
ˍwww.ausclimate.com.au
ˍwww.winixaustralia.com.au
this unit
is compatible
with this
filter
FILTER
item : 1712-0092-01
GJ
this unit
is compatible
with this
filter
FILTER
item : 1712-0095-01
GU
English ZERO+
SAFETY AND CAUTIONS
Before operating this equipment, carefully read and follow these safety cautions and
instructions to avoid damage and ensure safe use.
Ensure filters are inserted before running unit
running unit without filters can shorten the units life and cause electric shock or injury.
Be sure foreign objects are NOT inserted into the vents on the unit
objects can include pins, rods, and coins.
Do not touch any part of the interior of the unit with wet hands
the high voltage may cause electric shock.
Ensure unit intake and outlet vents do not become blocked
blockage may lead to increased internal temperatures causing product failure and
deformation.
Do not use the unit as a step stool or place heavy objects on it
personal injury may occur or product failure and deformation.
WARNING Follow these instructions to reduce the risk of serious
injury or death and to reduce risk of damaging the unit.
Do not pull on the power cord when
unplugging the unit
Do not tie or knot power cord when unit
is in operation
If the unit becomes submerged in water,
unplug it and contact customer service
Do not unplug or move the unit while in
operation
Do not plug additional appliances into
the same outlet or power supply Do not touch the plug with wet hands
Unplug unit when not in operation for
extended periods of time
Cord can become damaged by forcefully
bending, pulling, twisting, bundling,
pinching or placing heavy objects on it
※If the supply cord is damaged, it must be replaced by a special cord or assembly
available from the manufacturer or its service agent.
※This appliance is not intended for use by a person (including children) with reduced
physical sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety.
※Children should be supervised to ensure that they do not play with the appliance.
English ZERO+
INITIAL OPERATION
① Insert the unit plug into an electrical outlet.
ˍThe Control Panel lights will turn on and
off.
② Press the 'Power' button.
NOTE
ˍDuring the first 4 minutes of power up, the Air Quality light
will flash as the Smart Sensors measure the air quality in the
environment, after which normal operation will begin.
③ By default, when the unit first powers on, the
mode will be set to Auto with PlasmaWave
®
enabled.
ˍWhen in Auto Mode the fan speed will
be automatically adjusted according to
the environments air quality.
ˍPlasmaWave
®
works to remove harmful
airborne contaminants.
NOTE
ˍIn Auto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
ˍWhen the unit is running, you may hear a chirping or buzzing
sound. The sound is from large particles passing through
PlasmaWave
®
, it is normal and does not signify product
failure. To disable PlasmaWave
®
, see page 11.
English ZERO+
AUTO AND SLEEP
Every time the Mode button is pressed, the Mode LED light will cycle through the
settings. (Auto, Sleep, Low, Medium, High, Turbo)
1. Auto Mode
Enables Auto operation based on the unit's air quality Smart Sensors.
① Press the Mode button to select Auto mode.
ˍThe mode LED light will indicate when
‘Auto’ mode has been selected, and
operation will begin.
ˍEach time the Mode button is pressed,
the modes will be cycled. (Auto, Sleep,
Low, Medium, High, Turbo).
NOTE
ˍWhen in Auto Mode the fan speed is automatically adjusted
according to the indoor air quality. As the indoor air quality
improves, the fan speed will automatically be reduced. If the
indoor air quality decreases the fan speed will automatically
be increased.
ˍWhen unit is first started, Auto Mode is enabled and set to
Low fan speed.
2. Sleep Mode
① Press the Mode button to select Sleep mode.
ˍThe mode LED light will indicate when
‘Sleep’ mode has been selected, and
operation in that mode will begin.
NOTE
ˍWhen Sleep mode is selected, the fan speed is automatically
set to Low. Fan speed can be changed by pressing the Fan
Speed (Mode) Button.
ˍWhen Sleep Mode is enabled, the Air Quality light is disabled.
Inhaltsverzeichnis
Andere Winix Luftreiniger Handbücher
Winix
Winix A231 Bedienungsanleitung
Winix
Winix 5500-2 Bedienungsanleitung
Winix
Winix C535 Bedienungsanleitung
Winix
Winix 2020EU Bedienungsanleitung
Winix
Winix Zero AUS-1050AZBU Bedienungsanleitung
Winix
Winix ZERO-N Bedienungsanleitung
Winix
Winix ZERO AZBU330-HWE Bedienungsanleitung
Winix
Winix AZNU230-HWE Bedienungsanleitung
Winix
Winix HEPA 5500 Bedienungsanleitung
Winix
Winix C545 Bedienungsanleitung
Winix
Winix HR1000 Bedienungsanleitung
Winix
Winix NK305 Bedienungsanleitung
Winix
Winix 6300 Bedienungsanleitung
Winix
Winix PlasmaWave 5300 Bedienungsanleitung
Winix
Winix AM90 Bedienungsanleitung
Winix
Winix NK300 Bedienungsanleitung
Winix
Winix AZSU350-JWB Bedienungsanleitung
Winix
Winix NK100 Bedienungsanleitung
Winix
Winix 5300-2 Bedienungsanleitung
Winix
Winix 5500-2 Bedienungsanleitung
Beliebte Luftreiniger Handbücher anderer Marken
AtmosAir
AtmosAir P2002 Bedienungsanleitung
Friedrich
Friedrich C-90A Bedienungs- und Montageanleitung
Surgically Clean Air
Surgically Clean Air JADE2.0 Bedienungsanleitung
Base aire
Base aire 555 Pro Bedienungsanleitung
Champion
Champion CP25 Bedienungsanleitung
vollara
vollara Air & Surface Pro+ Bedienungsanleitung