Winmate W10IB3S-PCH2AC Bedienungsanleitung

10.1” P-CAP Access Control

W10IB3S-PCH2AC & W10IB3S-PCH1AC

UserManual

Version 1.0

No part of this document may be reproduced, copied, translated, or transmitted in any

form or by any means, electronic or mechanical, for any purpose, without the prior

written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserves the right to make changes, without notice, to any product, including circuits

and/or software described or contained in this manual in order to improve design

and/or performance. We assume no responsibility or liability for the use of the

described product(s), conveys no license or title under any patent, copyright, or masks

work rights to these products, and makes no representations or warranties that these

products are free from patent, copyright, or mask work right infringement, unless

otherwise specified. Applications that are described in this manual are for illustration

purposes only. We make no representation or guarantee that such application will be

suitable for the specified use without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and

workmanship defects for a period of one year from the invoice date. If the customer

discovers a defect, we will, at his/her option, repair or replace the defective product at

no charge to the customer, provide it is returned during the warranty period of one year,

with transportation charges prepaid. The returned product must be properly packaged

in its original packaging to obtain warranty service. If the serial number and the product

shipping data differ by over 30 days, the in-warranty service will be made according to

the shipping date. In the serial numbers the third and fourth two digits give the year of

manufacture, and the fifth digit means the month (e. g., with A for October, B for

November and C for December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the

website of our distributor to find the update information about the product. Second,

contact with your distributor, sales representative, or our customer service center for

technical support if you need additional assistance. You may need the following

information ready before you call:

Product serial number

Software (OS, version, application software, etc.)

Description of complete problem

The exact wording of any error messages

In addition, free technical support is available from our engineers every business day.

We are always ready to give advice on application requirements or specific information

on the installation and operation of any of our products.

Safety Information

Warning!

Always completely disconnect the power cord from your chassis whenever you

work with the hardware. Do not make connections while the power is on.

Sensitive electronic components can be damaged by sudden power surges.

Only experienced electronics personnel should open the PC chassis.

Caution!

Always ground yourself to remove any static charge before touching the CPU card.

Modern electronic devices are very sensitive to static electric charges. As a safety

precaution, use a grounding wrist strap at all times. Place all electronic

components in a static-dissipative surface or static-shielded bag when they are not

in the chassis.

Safety Precautions

Please read these safety instructions carefully.

Please keep this user's manual for later reference.

Please disconnect this equipment from any AC outlet before cleaning. Do not use liquid or

spray detergents for cleaning. Use a damp cloth.

For pluggable equipment, the power outlet must be installed near the equipment and must be

easily accessible.

Keep this equipment away from humidity.

Put this equipment on a reliable surface during installation. Dropping it or letting it fall could

cause damage.

The openings on the enclosure are for air convection and to protect the equipment from

overheating.

DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source is correct before connecting the equipment to the

power outlet.

Position the power cord so that people cannot step on it. Do not place anything over the

power cord.

All cautions and warnings on the equipment should be noted.

If the equipment is not used for a long time, disconnect it from the power source to avoid

damage by transient over-voltage.

Never pour any liquid into an opening. This could cause fire or electrical shock.

Never open the equipment. For safety reasons, only qualified service personnel should open

the equipment.

If any of the following situations arises, get the equipment checked by service personnel:

oThe power cord or plug is damaged.

oLiquid has penetrated into the equipment.

oThe equipment has been exposed to moisture.

oThe equipment does not work well or you cannot get it to work according to the user’s

manual.

oThe equipment has been dropped and damaged.

oThe equipment has obvious signs of breakage.

Do not leave this equipment in an uncontrolled environment where the storage temperature

is below -20°C (-4°F) or above 60°C (140°F). It may damage the equipment.

CAUTION –Use the recommended mounting apparatus to avoid risk of injury.

WARNING –Only use the connection cords that come with the product. When in doubt,

please contact the manufacturer.

WARNING –Ground against electrostatic damage to the device by taking the following

preventive steps:

oCover workstations with approved anti-static material. Use a wrist strap connected to a work

surface and properly grounded tools and equipment.

oUse anti-static mats, heel straps, or air ionizer for added protection.

oHandle electrostatic-sensitive components, PCB’s and assemblies by the case or the edge of

the board.

oAvoid contact with pins, leads, or circuitry.

oTurn off power and input signals before inserting and removing connectors or test equipment.

oKeep the work area free of non-conductive materials, such as ordinary plastic assembly aids

and Styrofoam.

oUse filed service tools, such as cutters, screwdrivers, and vacuum cleaners that are conductive.

oAlways lay drivers and PCB’s with the component side down on anti-static foam.

Important Information

Federal Communications Commission Radio Frequency Interface Statement –For USA

This device complies with part 15 FCC rules. Operation is subject to the

following two conditions:

This device may not cause harmful interference.

This device must accept any interference received including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "A" digital device,

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at him own expense.

Declaration of Conformity (DoC)

[English]

The object of the declaration described above [A] is in conformity with the requirement of the

following EU legislations [B] and harmonized standards [C].

Product also complies with the Council directions [D].

[German]

Das oben beschriebene Objekt [A] entspricht den Anforderungen der nachfolgend aufgeführten

EU-Vorgben [B] und den harmonisierten Normen [C].

Das Produkt entspricht außerdem den EU-Direktiven [D].

Contents

Copyright Notice...................................................................................................................................................5

Trademark Acknowledgement .............................................................................................................................5

Disclaimer.............................................................................................................................................................5

Warranty...............................................................................................................................................................5

Customer Service..................................................................................................................................................6

Safety Information................................................................................................................................................6

Safety Precautions................................................................................................................................................7

Important Information .........................................................................................................................................8

Declaration of Conformity (DoC)..........................................................................................................................9

Introduction........................................................................................................................................................13

Features..............................................................................................................................................................13

PackageContents ................................................................................................................................................13

ProductOverview................................................................................................................................................14

Drawing Input / OutputInstruction...............................................................................................................14

Mechanical Dimensions......................................................................................................................................16

GETTING STARTED..............................................................................................................................................18

Jumpers ..........................................................................................................................................................18

Jumper list ..................................................................................................................................................18

Jumper settings ..........................................................................................................................................18

Connectors and Pin assignments....................................................................................................................21

COM1: RS232/422/485...............................................................................................................................22

USB 1/2: USB 3.0 (Lower)/USB2.0 (Upper)Ports ........................................................................................23

HDMI: HDMI Connector..............................................................................................................................23

LAN1 (LAN2): Intel®LAN Ports (RJ-45) ........................................................................................................23

1394b (optional).........................................................................................................................................24

SPK: 2W External Speaker ..........................................................................................................................24

Audio: Line_in / Line_out / Mic_in.............................................................................................................24

VGA: VGA Internal Wafer ...........................................................................................................................25

LVDS: LVDS Port..........................................................................................................................................25

SATA II: SATA 2.0 Port.................................................................................................................................26

SATA Power ................................................................................................................................................26

CPU Fan.......................................................................................................................................................26

GPIO: General Purpose I/O.........................................................................................................................27

USB 3/4 (USB 5/6): USB 2.0 Wafer .............................................................................................................27

COM2 (COM3 / COM4): RS232...................................................................................................................28

Using the AC power adapter. .............................................................................................................................28

Perform the following to connect the Panel PC to AC to DCAdapter: ...........................................................28

AC adapter components.................................................................................................................................29

Tips for using the AC power adapter..............................................................................................................29

About the Adapter..........................................................................................................................................29

How to turn on the device..................................................................................................................................30

Connecting to Power Supply ..........................................................................................................................30

Perform the following to connect the Panel PC to AC to DCAdapter: ...........................................................30

Turning off the device ........................................................................................................................................30

Software Utilities................................................................................................................................................31

“Utilities”-.......................................................................................................................................................31

“Brightness”....................................................................................................................................................31

“Volume” ........................................................................................................................................................31

“LED Light Bar” ...............................................................................................................................................32

“Performance”................................................................................................................................................32

“Touch lock” Using touch lock button to lock / unlock the touch function...................................................32

LED Light Bar SDK Porting Guide ........................................................................................................................32

Projected CapacitiveTouch..................................................................................................................................33

Driver Installation...............................................................................................................................................34

Installation of Chipset Driver..........................................................................................................................34

Installation of Graphic Driver .........................................................................................................................37

Panel Resolution Setting.....................................................................................................................................41

Installation of Ethernet Driver............................................................................................................................43

Audio Driver Introduction ..................................................................................................................................46

Installation of Audio Driver.............................................................................................................................46

USB 3.0 Driver Installation..................................................................................................................................47

Mounting Installation.........................................................................................................................................51

PCAP Series Mounting Guide..........................................................................................................................51

VESA Mount................................................................................................................................................51

Flush Mount / Panel Mount: ......................................................................................................................51

Winmate VESA Bracket Mount (Optional): ................................................................................................52

SPECIFICATIONS..................................................................................................................................................53

Hardware Specifications.................................................................................................................................53

W10IB3S-PCH2AC.......................................................................................................................................53

W10IB3S-PCH1AC.......................................................................................................................................54

Restoring Operating System...............................................................................................................................55

UsingRecoveryWizardtoRestorePanelPC.........................................................................................................55

Introduction

Interactive and smart display system of an intelligence building is in a fast growing phase. Winmate

Multi Touch Flat Panel PC and Display are suitable for home automation and room management

systems. By connecting to centralized database, it can provide real time update for booking status

and available schedule, or perform as a synchronous display in meetings.

Features

•10.1” 1280 x 800 Resolution with P-Cap Multi-touch Screen (W10IB3S-PCH2AC)

•10.1” 1204 x 600 Resolution with P-Cap Multi-touch Screen (W10IB3S-PCH1AC)

• Low-Power System with Intel® Celeron® N2930 Processor

•Fanless Cooling System and Ultra-low Power Consumption

• Dual Gigabit Ethernet

• Front IP65 Water and Dust Proof

•LED Light Bar Indicator (Optional)

•Built-in HF RFID (Optional)

PackageContents

Before using this Panel PC, please make sure that all the items listed below are present in your

package

10.1” Panel PC

Power Cord

AC to DC Power Adapter

Terminal Block 3 pin

External USB cable

Driver CD & Manual

VESA Mounting Screw

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Winmate IP-Zugriffskontrollsysteme Handbücher

Winmate

Winmate W05TA3S-PCT3 Bedienungsanleitung

Beliebte IP-Zugriffskontrollsysteme Handbücher anderer Marken

ZKTeco

ZKTeco SpeedFace-V5L Bedienungsanleitung

Jantar

Jantar REX A-1-9 Bedienungsanleitung

2N Access Unit Merkblatt

Kedacom

Kedacom KSCA120 Series Bedienungsanleitung

H3C

H3C WX2880X Bedienungsanleitung

G4S

G4S S870-EX Leitfaden

PRASTEL

PRASTEL M2000PE Bedienungsanleitung

Allegion

Allegion interflex IF-281 Cylinder Bedienungsanleitung

TECOM

TECOM TS1067E Bedienungsanleitung

Fermax

Fermax Memokey 100C Benutzerhandbuch

Fermax

Fermax CITYLINE MEMOKEY Bedienungsanleitung

Software House

Software House iSTAR Pro 2U RM Bedienungsanleitung

AKCP

AKCP SP+ Bedienungsanleitung

Bpt

Bpt HNA/102 Bedienungsanleitung

Civintec

Civintec CV9601T-T-1F Bedienungsanleitung

BioMax

BioMax N-X90W Bedienungsanleitung

ZKTeco

ZKTeco OP-200 Bedienungsanleitung

FingerTec

FingerTec s-Kadex Bedienungsanleitung