Winmate W10FA3S-GCH1 Bedienungsanleitung

Please read these instructions carefully before using this product, and save this manual for future use.

7~15”G-WIN Front IP65

P-Cap Panel PC

Freescale® Cortex® A9 i.MX6 Dual Core,1 GHz

Tailor Made for Your Heavy Duty Needs Model No. W07FA3S-GCO1

W10FA3S-GCH1(HB)

R10FA3S-GCT2(HB)

R12FA3S-GCM2(HB)

R15FA3S-GCC3(HB)

User Manual

Document Version 1.0

Document Part No. 9152111I102G

GC-Series Panel PC User Manual

Contents

Preface 4

About This User Manual 8

Chapter 1: Introduction 9

1.1 Overview 10

1.2 Features 10

1.3 Package Content 10

1.4 Product Overview 11

Chapter 2: Getting Started 17

2.1 Turning on/ off Your Device 18

2.2 Connector Description 19

2.2.1 Power Connector 19

2.2.2 Serial Port Connector 19

2.2.3 RJ45 Connector 19

2.2.4 USB 2.0 Connector 19

2.2.5 USB OTG Connector 20

2.2.6 Micro SD Card Slot 20

2.2.7 CANBus Connector 20

Chapter 3: Mounting 21

3.1 Cable Mounting Considerations 22

3.2 Safety Precautions 22

3.3 Mounting Guide 22

3.3.1 RAM Mount 23

3.3.2 VESA Mount 24

3.3.3 Panel Mount 25

Chapter 4: Operating the Device 26

4.1 Operating System 27

4.2 Multitouch 27

4.3 Home Screen 28

4.4 Quick Settings 29

4.5 Ethernet 29

4.5.1 Configuring Ethernet 30

4.5.2 Checking Ethernet Settings 31

4.6 Winmate® Home Manager (WHM) 31

4.6.1 How to Lock Applications 31

4.6.2 How to Unlock Applications 34

4.6.3 How to Change Password 35

4.7 Configuring Serial Port Setting 36

Chapter 5: Software Installation 39

5.1 Android Debug Bridge (ADB) Driver Installation 40

Preface

5.1.1 Disabling Driver Signature on Windows 8 40

5.1.2 ADB Driver Installation 45

5.2 Installing Android Debug Bridge (ADB) 48

5.2.1 Installing Android Debug Bridge (ADB) 48

5.2.2 Using Android Debug Bridge (ADB) 49

5.3 Downloading Image Tool 49

5.4 OTA Update Guide 49

5.5 OS Image Update Guide 53

Chapter 6: Technical Support 54

6.1 About Technical Support 55

6.2 Problem Report Form - 55 -

Appendix 56

Appendix A: Product Specifications 56

Appendix B: Cleaning the Monitor 58

Appendix C: Winmate Software Development Kit 59

GC-Series Panel PC User Manual

Preface

No part of this document may be reproduced, copied, translated, or transmitted in any form or

by any means, electronic or mechanical, for any purpose, without the prior written permission

of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits and/or

software described or contained in this manual in order to improve design and/or performance.

We assume no responsibility or liability for the use of the described product(s) conveys no

license or title under any patent, copyright, or masks work rights to these products, and make

no representations or warranties that these products are free from patent, copyright, or mask

work right infringement, unless otherwise specified. Applications that are described in this

manual are for illustration purposes only. We make no representation or guarantee that such

application will be suitable for the specified use without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and workmanship

defects for a period of one year from the invoice date. If the customer discovers a defect, we

will, at his/her option, repair or replace the defective product at no charge to the customer,

provide it is returned during the warranty period of one year, with transportation charges

prepaid. The returned product must be properly packaged in its original packaging to obtain

warranty service. If the serial number and the product shipping data differ by over 30 days, the

in-warranty service will be made according to the shipping date. In the serial numbers the third

and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g.,

with A for October, B for November and C for December).

For example, the serial number 1W18Axxxxxxxx means October of year 2018.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

Product serial number

Software (OS, version, application software, etc.)

Description of complete problem

The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

Preface

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or

to alert you to the potential for hardware damage or personal injury. These are Notes,

Important, Cautions, and Warnings. The following is an example of each type of advisory.

Note:

A note is used to emphasize helpful information

Important:

An important note indicates information that is important for you to know.

Caution/ Attention

A Caution alert indicates potential damage to hardware and explains how to avoid

the potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et explique

comment éviter le problème potentiel.

Warning!/ Avertissement!

An Electrical Shock Warning indicates the potential harm from electrical hazards

and how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des

emplacements électriques et comment éviter ces problèmes.

Alternating Current Mise à le terre !

The Protective Conductor Terminal (Earth Ground) symbol indicates the potential

risk of serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc électrique grave

à la terre incorrecte.

GC-Series Panel PC User Manual

Safety Information

Warning!/ Avertissement!

Always completely disconnect the power cord from your chassis whenever you

work with the hardware. Do not make connections while the power is on. Sensitive

electronic components can be damaged by sudden power surges. Only

experienced electronics personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous travaillez

sur celui-ci. Ne pas brancher de connections lorsque l’alimentation est présente.

Des composantes électroniques sensibles peuvent être endommagées par des

sauts d’alimentation. Seulement du personnel expérimenté devrait ouvrir ces

chassis.

Caution/ Attention

Always ground yourself to remove any static charge before touching the CPU

card. Modern electronic devices are very sensitive to static electric charges. As a

safety precaution, use a grounding wrist strap at all times. Place all electronic

components in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique avant

de toucher la carte CPU. Les équipements électroniques moderns sont très

sensibles aux décharges d’électricité statique. Toujours utiliser un bracelet de

mise à la terre comme précaution. Placer toutes les composantes électroniques

sur une surface conçue pour dissiper les charge, ou dans un sac anti-statique

lorsqu’elles ne sont pas dans le chassis.

For your safety carefully read all the safety instructions before using the device. Keep this user

manual for future reference.

Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid or

spray detergents for cleaning. Use a damp cloth.

For pluggable equipment, the power outlet must be installed near the equipment and must

be easily accessible.

Keep this equipment away from humidity.

Put this equipment on a reliable surface during installation. Dropping it or letting it fall

could cause damage.

The openings on the enclosure are for air convection and to protect the equipment from

overheating.

Do not cover the openings.

Before connecting the equipment to the power outlet make sure the voltage of the power

source is correct.

Position the power cord so that people cannot step on it. Do not place anything over the

power cord.

If the equipment is not used for a long time, disconnect it from the power source to avoid

damage by transient over-voltage.

Never pour any liquid into an opening. This could cause fire or electrical shock.

Never open the equipment. For safety reasons, only qualified service personnel should

open the equipment.

All cautions and warnings on the equipment should be noted.

*Let service personnel to check the equipment in case any of the following

problems appear:

oThe power cord or plug is damaged.

oLiquid has penetrated into the equipment.

oThe equipment has been exposed to moisture.

oThe equipment does not work well or you cannot get it to work according to

Preface

the user manual.

oThe equipment has been dropped and damaged.

oThe equipment has obvious signs of breakage.

Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the

equipment.

Caution/Attention

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque de

blessure.

Warning!/ Avertissement!

Only use the connection cords that come with the product. When in doubt,

please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le produit. Si vous

doutez de leur provenance, contactez le manufacturier.

Warning!/ Avertissement!

Always ground yourself against electrostatic damage to the device.

Toujours vérifier votre mise à la terre afin que l’équipement ne se décharge

pas sur vous.

Cover workstations with approved anti-static material. Use a wrist strap connected

to a work surface and properly grounded tools and equipment.

Use anti-static mats, heel straps, or air ionizer for added protection.

Avoid contact with pins, leads, or circuitry.

Turn off power and input signals before connecting test equipment.

Keep the work area free of non-conductive materials, such as ordinary plastic

assembly aids and Styrofoam.

Use filed service tools, such as cutters, screwdrivers that are conductive.

Always put drivers and PCB’s component side on anti-static foam.

Important Information

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at him own expense.

GC-Series Panel PC User Manual

EC Declaration of Conformity

This equipment is in conformity with the requirement of the

following EU legislations and harmonized standards. Product also

complies with the Council directions.

Electromagnetic Compatibility Directive (2014/30/EU)

EN55024: 2010 EN 55022: 2010 Class B

oIEC61000-4-2: 2009

oIEC61000-4-3: 2006+A1: 2007+A2: 2010

oIEC61000-4-4: 2012

oIEC61000-4-5: 2014

oIEC61000-4-6: 2013

oIEC61000-4-8: 2010

oIEC61000-4-11: 2004

EN55022: 2010/AC:2011

EN61000-3-2:2014

EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

About This User Manual

This User Manual provides information about using the Winmate® G-WIN GC-Series Panel

PC. This User Manual applies to the G-WIN GC-Series Panel PC - W07FA3S-GCO1,

W10FA3S-GCH1(HB), R10FA3S-GCT2(HB), R12FA3S-GCM2(HB), R15FA3S-GCC3(HB).

The documentation set for the G-WIN GC-Series Panel PC provides information for specific

user needs, and includes:

G-WIN GC-Series Panel PC I User Manual –contains detailed description on how

to use the HMI device, its components and features.

G-WIN GC-Series Panel PC Quick Start Guide –describes how to get the HMI up and

running.

Note:

Some pictures in this guide are samples and can differ from actual product.

Document Revision History

Version

Date

Note

1.0

11-Jul-2019

Initial document release

Chapter 1: Introduction

This chapter gives you product overview, describes features and hardware

specification. You will find all accessories that come with the panel PC in

the packing list. Mechanical dimensions and drawings included in this

chapter.

Chapter 1: Introduction

1.1 Overview

Congratulations on purchasing Winmate® GC65 Panel PC. The elegantly designed, yet rugged,

industrial grade G-WIN GC series is designed for heavy duty applications.

With rugged construction, ultimate computing power, GC65 series are guaranteed to meet

"heavy duty" needs. This series feature high computing power and user-friendly interface with

projected capacitive multi-touch (P-CAP) technology and support Android operating system.

Rugged housing provides front IP65 protection against outer dust and water splash.

1.2 Features

Winmate® GC65 Panel PC features:

7”, 10.1'', 10.4”, 12.1” and 15” P-Cap touchscreen

Freescale® Cortex® A9 i.MX6 Dual Core

Android 6.0

Fanless cooling system and ultra-low power consumption

Front IP65 for protection against water and dust

A true flat, easy-to-clean front surface with edge-to-edge design

Plenty of I/O, including 1 x LAN, 1 x RS232, 1 x USB 2.0, 1 x USB OTG, 1 x CANBus

1.3 Package Content

Carefully remove the box and unpack your device. Please check if all the items listed below are

inside your package. If any of these items are missing or damaged contact us immediately.

Standard factory shipment list:

Panel PC

Quick Start Guide

(Hardcopy)

Driver CD & User Manual

Varies by product

specifications

Part No. 9152111I102G

Part No. 9171111I103L

AC Adapter

(12V/ 50W)

Power Cable

Terminal Block 2 Pin

Part No. 922D050W12VA

Varies by country

Part No. 94J602G020K0

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Winmate Touchscreen Handbücher

Winmate

Winmate W05TA3S-PCT3AC Bedienungsanleitung

Winmate

Winmate G-WIN Slim IP65 Bedienungsanleitung

Winmate

Winmate R15IH3S-MRA3FP Bedienungsanleitung

Winmate

Winmate P-CAP SERIES Bedienungsanleitung

Winmate

Winmate G-WIN GC Series Bedienungsanleitung

Winmate

Winmate W10IB3S-PCH2AC-PoE S-Series Bedienungsanleitung

Winmate

Winmate R15ID3S-65A1FTE Bedienungsanleitung

Winmate

Winmate R15IB7T-POC3 Bedienungsanleitung

Winmate

Winmate W07RK3S-PCO1-POE Bedienungsanleitung

Winmate

Winmate R15IK3S-POC3 Bedienungsanleitung

Winmate

Winmate R15FA3S-PCC3-PoE Bedienungsanleitung

Winmate

Winmate R17IB3S-RKA1ML Bedienungsanleitung

Winmate

Winmate R15IH3S-MRA3FP Bedienungsanleitung

Winmate

Winmate G-WIN W07RK3S-GCT1 Bedienungsanleitung

Winmate

Winmate G-WIN Slim IP65 Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Winmate

Winmate W10IE3S-MRH2FP Bedienungsanleitung

Winmate

Winmate GC Series Bedienungsanleitung

Winmate

Winmate R05FA3S-OFD1HMHB Bedienungsanleitung

Winmate

Winmate G-WIN AMD Rugged Series Bedienungsanleitung

Winmate

Winmate R05FA3S-IPD1HMHB Bedienungsanleitung

Winmate

Winmate 7'' S-Series Bedienungsanleitung

Winmate

Winmate R15IH3S-SPC3 Bedienungsanleitung

Winmate

Winmate E-Series Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung