1
DateCode Number: Series Model number Draft
TVLink RS868 T387.01 21-09-09
TVRRL868A02PMR
DIGITAL RADIO CONTROL SYSTEM TVRRL868A02P
EN
ATTENTION!
The subject appliance must be installed only by qualied technical
personnel in compliance with the standards. All connections must be
rated for a single-phase power supply of 230V. For the disconnection from
the power line, use an all-pole switch with contact with an opening of at
least 3,5mm. Only suitable materials for the connections must be used to
guarantee insulation that complies with current standards on the subject
of electrical safety. The programmer carries out movement commands by
radio; all the necessary safety devices are to be seen to separately.
Thedevice’ssignalreceptioncouldbedisturbedbyseveralfactorssuchas:
-thepresenceofelectricalfrequencynoisebeingtransmittedbyother
appliancesworkinginthesameenvironmentandonthesamefrequency.
-appliancesinstalledincontainerswithmetalparts;onlyusecontainersmade
ofplastic.
1- GENERAL DESCRIPTION
Receiverfortheremotecontrolofappliancesuptoamaximumresistive
powerof1000WwithON/OFForimpulsivefunctionandcompatiblewiththe
TVLinksystem.
Thecommandswhicharesentbytransmittercanbe:
-single(everychannelactivatesanddeactivatestheload,ON/OFFor
impulsive)
-inpairs:
Channelpair1,2:channel1-ONandchannel2OFF
Channelpair3,4:channel3-ONandchannel4OFF
Channelpair6,7:channel6-ONandchannel7OFF
ThespecicTVLINKcodesareencodeddirectlybythemanufacturerinside
anEEprommemorymodulethatmaintainstheinformationevenincaseof
blackouts.Theyarealsoprintedontheproductlabelsotheycanbeinsertedinto
theTVLINKdevice.Thesecodescannotbecancelledormodiedastheyarean
integralpartofthereceiver.
Thestandardradiocontrolcodescanbeinserted(memorized)orcancelledin
thereceiverbypressingabuttonthroughasmallholelocatedtoonesideofthe
aerial(seepicture1)
Thecodetransmissiontypeis“Rolling-code”.Thecodeischangedforevery
transmissionthroughtheuseofanalgorithmthatonlythereceiverisableto
recognize.
Themaximumnumberofmemorisationsthatcanbeexecutedis42.
1.1- How to modify the function of the receiver (ON/OFF, impulsive)
InordertomodifythefunctionofthereceiverfromON/OFFtoimpulsive(and
vice-versa),itisnecessarytocarryoutthefollowingprocedure:
1)switchoffthepowersupplyofthereceiver
2)pushandkeeppushedtheinternalpush-buttonP1,switchonthepower
supply(thebuzzerwillemitacontinuoussound).After5seconds,an
intermittentsoundwillindicatethatthefunctionofthereceiverhasbeen
changed.
2- Transmitters
Thetransmittersareencodedinthefactoryandeachtransmitterhasitsown
uniquecode.
Caution!Ifyoukeepachannelbuttonpresseddownformorethan30seconds
thetransmitterwillautomaticallyswitchoff.
ThereceiveriscompatiblewithalltransmittersoftheTVLinkrange:TVTXV,
TVTXP,TVTXC,TVTXK,TVTXQ,TVTXL,TVTXS,TVTXW,TVTXM.
3- ATTENTION: The rst transmitter can only be memorized using
the receiver (you are advised to cancel the entire memory content at the
beginning of each installation by pressing the P1 button).
3.1- Memorisation single channel
Thechannelsch1,ch2,ch3,ch4...willbememorisedonebyone.
1-PressandholddownthepushbuttonP1ofthereceiver,thebuzzerwillsound
continuously.
2-Transmitthechannelwhichistobememorised,oncethechannelis
memorised,thebuzzerwillsoundintermittently,releasethepushbutton.
Repeatpoints1and2tomemoriseulteriorchannelsfromreceiver.
Seeparagraph4tomemoriseulteriorchannelsfromtransmitter.
3.2- Memorisation couple of channels
Thechannelsch1,ch2andch3,ch4andch6,ch7willbememorisedincouple.
1-Presstwo timesandholddownthepushbuttonP1ofthereceiver,thebuzzer
willsoundcontinuously.
2-Transmitoneofthecoupleofchannelwhichistobememorised,once
thechannelismemorised,thebuzzerwillsoundintermittently,releasethe
pushbutton.
Repeatpoints1and2tomemoriseulteriorchannelsfromreceiver.
Seeparagraph4tomemoriseulteriorchannelsfromtransmitter.
WiseHouse,21LyddenRoad,Wandsworth,London,SW184LT
Telephone:02088742234 Fax:02088712262
WISE
CONTROLS
4- How to insert a transmitter via radio without having to access the
receiver by means of an already memorized transmitter (memory indexing
procedure)
Thetypeofmemorisationofthechannels(single,couple)dependsonhowthe
channel,whitchisusedinpoint2,hasbeenmemorized.
1)PressthebuttonP3locatedinsidethealreadymemorizedtransmitter.The
enabledreceiversoundcontinuouslyfor5seconds.
2)Transmitachannelpresentinthememoryofthereceiver,inwhichthenew
codeistobememorized,within5secondsandthebuzzerwillinterruptthe
soundfor1sec,andthencarryonforanother5seconds.
3)Transmitthenewchanneltobememorizedwithin5secondsandonce
memorizedthebuzzerwillsoundintermittently.
Toinsertothertransmittersanothercoderepeatoperations1,2and3
Ifthereceiver’smemoryisfullitcannotbeenabledandthiswillbeindicated
bythebuzzerB1soundingintermittently.
5- To cancel a code from the receiver:
1)pressthreetimesandthenholddownthebuttonP1andthebuzzerwillsound
intermittentlyandslowly.
2)pressthechannelwhichistobecancelled,onceithadbeencancelledthe
buzzerwillsoundcontinuously.Inthecase,thechannelhasbeenmemorizedin
pairs,thisoperationcancelsbothchannels.
5.1- To cancel a code from via radio:
1)pressthreetimesandthenholddownthebuttonP3within5secondsandthe
buzzerwillsoundintermittentlyandslowly.
2)pressthechannelwhichistobecancelled,onceithadbeencancelledthe
buzzerwillsoundcontinuously.Inthecasethechannelhasbeenmemorizedin
pairs,thisoperationcancelsbothchannels.
5.2- To cancel all codes in memory:
1)pressthebuttonP1fourtimesandholddownforatleast10seconds(during
thisperiodthebuzzerwillsoundintermittentlyandrapidly)untilthebuzzerwill
soundcontinuously.Releasethebutton.
6- Full or empty memory
Ifthememoryofthereceiverisfullorempty,thebuzzerwillmake3bipboth
duringthememorisationandaftertheresetofthereceiver.
6.1- Errors during the memorising or deleting
Ifthecodehasn’tbeenmemoriseditcouldbeduetothefollowingreasons:
-thememoryisfull.Inthiscasethebuzzerwillsoundintermittentlyandslowly
for3secondseachtimeitisswitchedon,
-theindexingprocedurehasnotbeencorrectlystartedup,
-thecodealreadyexistsinmemory.
Ifthecodehasn’tbeencancelleditcouldbeduetothefollowingreasons:
-thecodedoesn’texistinmemory.
7- TECHNICAL SPECIFICATIONS
Receptionfrequency 868.3MHz
Intermediatefrequency 10.7MHz
Sensitivity(nelytunedsignal) 1µV
Powersupply 230Vac
Consumption 0.5W
Maximumcommutablepowerattherelay:
withresistiveload 8A250Vac
8A30Vdc
Operatingtemperaturerange -20°÷+60°C
Intheviewofaconstantdevelopmentoftheirproducts,themanufacturer
reservestherightforchangingtechnicaldataandfeatureswithoutpriornotice.
