Wohler M 603 Bedienungsanleitung

The Measure of Technology

Operation Manual

Pressure Meter

Part 2

Best.-Nr. 25178 2023-01-18

Wöhler M 603

Customer menu

Table of Content

1Customer menu.....................................3

1.1 Set up a new customer.................................. 3

1.2 Search function: customer, project, customer

number, project number ................................ 4

1.3 Delete customer ............................................ 6

1.4 Delete all ....................................................... 6

1.5 Select customers before measurement......... 6

2Save data in the Readings Menu.........7

2.1 Delete measurement data ............................. 7

2.2 Print measurement data ................................ 8

2.3 Save measurement data in the customer

menu ............................................................. 8

3Menu „Settings“....................................9

3.1 Device ........................................................... 9

3.2 Smart Connects .......................................... 13

3.3 Calibration ................................................... 13

4Menu “Device Check“ ........................14

4.1 Device information....................................... 14

4.2 Tightness test.............................................. 14

4.3 Smart Connect Info ..................................... 14

5Troubleshooting..................................15

6Maintenance ........................................15

6.1 Maintenance list .......................................... 15

7Warranty and Service .........................16

7.1 Warranty...................................................... 16

7.2 Service ........................................................ 16

8Declaration of Conformity..................17

Customer menu

1 Customer menu

The customer menu offers the possibility to create customer folders, to select custom-

ers, to display and print already stored measured values or to transfer them.

Fig.

1: Customer Menu

Measurement data can be assigned to different

customers and projects in the device. The assign-

ment

is done via the corresponding customer and

project numbers.

1.1 Set up a new customer

NEW CUSTOMER

•Click on the NEW CUSTOMER icon to

create a new customer.

Customer menu

Fig.

2: create a new customer file

•One after the other, enter the customer

name, the corresponding customer number,

the project name and the project number

and confirm each with the check mark.

1.2 Search function: customer, project, customer number, project

number

FIND CUSTOMER

•In the customer menu click on the “Find

customer” icon.

Customer menu

Fig.

3: customer search

•Enter any known part of the customer

name. You do not need to be case-

sensitive.

The first matches are now displayed. With the

scroll bar you can scroll through the matches

and select the desired customers.

PROJECT SEARCH

After selecting the customer, you can search

the project in the same way.

•

Click on the icon PROJECT SEARCH.

Search by customer number and

project number

NOTE!

In the settings menu, you have the possibility to

set that the search should always be carried out

with the customer number or the plant number,

cf. chapter 3.1.

Customer menu

1.3 Delete customer

In the customer menu it is possible to cancel a

selected customer.

•

Click on a customer to select him.

•

Click on the DELETE CUSTOMER icon.

1.4 Delete all

•To delete all customers with the stored data,

click the DELETE ALL icon in the customer

menu.

1.5 Select customer before

measurement

You have the possibility to select a customer

before a measurement and then save the

measured data under this customer after the

measurements.

•

Click on the customer in the customer menu

The customer symbol will appear in the top right

of the header in all menus, submenus and in the

results display. The customer symbol does not

appear during active measurements.

Customer menu

2 Save data in the Readings Menu

Readings

Icon

If the user accepts a record, the analyzer will en-

ter the readings menu automatically. It is also

possible to enter the readings menu by clicking on

the readings icon in the main menu.

•

Open a customer in the customer menu and

go to a project.

•

Click on the Measurement data icon.

Fig.

4: Measurement Data

The data can be managed in the measurement

data menu. A list of all possible measurements is

displayed here. Measurements already carried

out, the result of which has been printed but not

saved, are marked with a “tick”. Saved measure-

ments are marked with a lock. Only the data of the

marked or saved measurements can be deleted,

printed or saved.

The fields “Logo” and “Measurement representa-

tive” (bottom field) are marked with a check mark

according to the factory setting.

•

If you do not want the logo and the field for the

measurement representative to appear on the

printout, remove the corresponding check

mark by tapping the button. This setting will be

retained even after the device is switched off

and on again.

2.1 Delete measurement

data

Delete

Icon

•Click on the Delete icon to delete all selected

measurement data.

NOTE!

If you do not want to delete a record, mark it be-

forehand by tapping on the corresponding lock

behind the measurement.

Customer menu

2.2 Print results

Icon

•Click on the Print icon to print all stored rec-

ords on the Wöhler TD 100 printer.

NOTE!

If you do not want to print a record, select it be-

forehand by tapping the corresponding lock be-

hind the measurement.

A print preview is displayed in the display.

•

Click on the print icon if you want to start the

printout on the Wöhler TD 100 thermal printer.

NOTE!

When the measurement is stopped, you can also

print the records directly from the measurement

view without saving them first.

NOTE!

Position the printer so that there is no obstacle

between the infrared interfaces of the printer and

the Wöhler M 603.

2.3 Save measurement data

in the customer menu

•Click on the Save icon to assign all selected

measurements to a customer or an installa-

tion. The view now changes to the customer

menu. Here you can create new customer

folders or assign the measured values to an

existing customer.

Customer menu

3 Menu „Settings“

3.1 Device

Fig.

5: Device Settings

In the submenu “Device” all necessary settings for

the device and the measurements can be made.

Only 7 of the 14 parameters are displayed in the

display view.

•

Swipe your finger across the display to view

additional sub-items.

•

To change the settings, click the correspond-

ing field.

Fig.

6: Input field

An input or selection field opens.

The active input field is highlighted in light blue.

•

Enter your input using the number field. The

existing entries are overwritten automatically.

•

Click on an input field to activate or deactivate

it.

•

To save the changed settings and exit the

settings menu, click on the check mark in the

footer.

Customer menu

Factory settings

•If you want to reload the factory default set-

tings, tap the Factory Settings icon in the

footer.

Date

Enter the date with day, month and year.

Time

Enter the time in 24h format with hour and

minutes.

Pressurization

Switch between normal pressure measurement

(1 new measured value per second) and fast

pressure measurement (4 measured values per

second)

Brightness

Adjustment of brightness from 1 - 100 %.

NOTE!

A bright display will increase the power con-

sumption.

Buzzer

Possibility to turn the beep quiet, loud or off.

The beep sounds when the user gives commands

via the touch screen.

Bluetooth

The Bluetooth module can be activat-

ed/deactivated here.

NOTE!

Pressure testing on water pipes with the Wöhler

SC 660 is only possible when the Bluetooth mod-

ule is activated.

Customer choice

Selection whether the search criterion in the cus-

tomer menu should be the customer name or the

customer number.

Project selection

Selection whether the search criterion for the pro-

jects should be the project name or the project

number.

Andere Handbücher für M 603

Inhaltsverzeichnis

Andere Wohler Messgerät Handbücher

Wohler

Wohler FA 320 Bedienungsanleitung

Wohler

Wohler WA 335 Bedienungsanleitung

Wohler

Wohler TA 420 Bedienungsanleitung

Wohler

Wohler IR Temp 210 Bedienungsanleitung

Wohler

Wohler HF 300 Bedienungsanleitung

Wohler

Wohler KM 410 Bedienungsanleitung

Wohler

Wohler CM 220 Bedienungsanleitung

Wohler

Wohler DC 2000 Bedienungsanleitung

Wohler

Wohler VE Bedienungsanleitung

Wohler

Wohler FA 430 Bedienungsanleitung

Wohler

Wohler LM25 Analog Series Bedienungsanleitung

Wohler

Wohler SP 22 Bedienungsanleitung

Wohler

Wohler HBF 420 Bedienungsanleitung

Wohler

Wohler DC 410FLOW Bedienungsanleitung

Wohler

Wohler CM 220 Bedienungsanleitung

Wohler

Wohler BC 600 Bedienungsanleitung

Wohler

Wohler A 400 Bedienungsanleitung

Wohler

Wohler A 400 Bedienungsanleitung

Wohler

Wohler A 400 Bedienungsanleitung

Wohler

Wohler AMP2-16V Series Bedienungsanleitung

Wohler

Wohler Smart Connect SC 660 Bedienungsanleitung

Wohler

Wohler DM 2000 Bedienungsanleitung

Wohler

Wohler 3343 Bedienungsanleitung

Wohler

Wohler DC 2000PRO Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung