Workzone Titanium+ AG36 Bedienungsanleitung

Xfinity Li-ION 20V

Instruction Manual

IMPORTANT

Read carefully before use

Keep for future reference

MODEL NUMBER

AG36

Version number: 003

Cordless Angle Grinder

1300 889 028

[email protected]m

1 x 20V Angle Grinder

Skin

1 x Side Handle

1 x Pin Wrench

5 x Assorted Cutting

Discs

1 x Instruction Manual

1 x Warranty Certicate

MODEL: AG36 PRODUCT CODE: 8290 06/2019

AFTERSALESSUPPORT

1300 889 028 (toll free) e-mail:

MODEL No.:

[email protected]

AG36 • 8290 • 06/2019

Welcome

Congratulations in choosing to buy a Workzone® Titanium 20V Li-Ion

Cordless Angle Grinder (battery / charger not included).

All products bought to you by Workzone® Titanium are manufactured

to the highest standards of performance and safety and, as part of our

philosophy of customer service and satisfaction, are backed by our

comprehensive 5 Year Warranty. We hope you will enjoy your purchase

for many years to come.

When you open your packaging, rst remove all items and check there

are no parts damaged or missing. If you nd anything wrong, do not

operate the product until the parts have been replaced or the fault has

been rectied. Failure to do so could result in serious personal injury.

AFTERSALESSUPPORT

1300 889 028 (toll free) e-mail:

MODEL No.:

[email protected]

AG36 • 8290• 06/2019

Contents

Application 4

Package Content List 4

Parts description 5

Description of symbols 6

General safety warnings 7

Important information-Product care 16

Assembly 17

Operation 22

Maintenance 24

Warranty 25

Environmental protection 26

Accessories and After Sales Parts 27

FAQ/Troubleshooting 28

Technical Specications 30

AFTERSALESSUPPORT

1300 889 028 (toll free) e-mail:

MODEL No.:

[email protected]

AG36 • 8290 • 06/2019

1. Application

20V Li-ion Cordless Angle Grinder

2. Package Content List

First time users or inexperienced operators pay particular attention to

the operation of the 20V Li-ion Cordless Angle Grinder, including details

of starting and stopping and correct use of the 20V Li-ion Cordless Angle

Grinder on pages 22-23, as well as the maintenance instructions on pages 24.

Intended use of 20V Li-ion Cordless Angle Grinder (battery / charger not

included)

NOTE: This product is for private domestic DIY use only. It is not suitable for

commercial or trade use.

This 20V Li-ion Cordless Angle Grinder is used for general purpose grinding

tasks on metal and stone.

The tool is to be used only for its prescribed purpose. Any other use is

deemed to be a case of misuse.

1 x 20V Li-Ion Cordless Angle Grinder Skin

1 x Carry Case

1 x Auxiliary handle with pin wrench

5 x Grinding discs

1 x Wheel guard for grinding

1 x Instruction manual

1 x Warranty Card & Certicate

• Remove all packing materials

• Ensure all parts on the contents

list are present

•

Check the appliance, and all

accessories for transportation

Damages

WARNING! Please read and understand this instruction manual

before use and keep it for your future reference. Your power tool

should only be passed on together with this instruction manual.

WARNING! To reduce risk of injury, only use the ALDI Xnity Plus

range of 20V Li-Ion battery packs. Other type of battery packs

may burst causing personal injury and damage. The battery pack

must be charged using with ALDI Xnity Plus 20V Li-Ion battery

chargers.

AFTERSALESSUPPORT

1300 889 028 (toll free) e-mail:

MODEL No.:

[email protected]

AG36 • 8290• 06/2019

3. Parts description

1. Spindle lock button

2. Auxiliary handle position x 3

3. On/o switch

4. Main handle

5. Battery release button*

6. Battery pack*

7. Auxiliary handle

8. Pin wrench

9. Grinding disc x 5

10. Wheel guard for grinding

11. Outer ange

12. Inner ange

13. Carry case

* Battery not included. Shown only for instructional purposes.

12 3 4

AFTERSALESSUPPORT

1300 889 028 (toll free) e-mail:

MODEL No.:

[email protected]

AG36 • 8290 • 06/2019

4. Description of symbols

The instruction manual, rating plate, or on the product itself, may

show these symbols. These represent important information about

the product or instructions on its use.

Warning

To reduce the risk of injury, user must read instruction manual

Wear ear protection

Wear eye protection

Wear breathing protection

Not permitted for face grinding with abrasive cutting o

wheels

Do not use broken grinder

Wear protective gloves

Not permitted for wet grinding

Conforms to relevant standards for electrical safety and

electromagnetic compatibility.

60 Months Warranty

AFTERSALESSUPPORT

1300 889 028 (toll free) e-mail:

MODEL No.:

[email protected]

AG36 • 8290• 06/2019

5. General safety warning

General Power Tool Safety Warnings

WARNING Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may

result in electric shock, ﬁre and/or serious injury.

SAFETY INSTRUCTIONS

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless) power

tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas

invite accidents.

b) Do not operate power tools in explosive atmospheres,

such as in the presence of ﬂammable liquids, gases or

dust. Power tools create sparks which may ignite the dust or

fumes.

c) Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodiﬁed plugs and

matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators. There

is an increased risk of electric shock if your body is earthed or

grounded.

c) Do not expose power tools to rain or wet conditions. Water

AFTERSALESSUPPORT

1300 889 028 (toll free) e-mail:

MODEL No.:

[email protected]

AG36 • 8290 • 06/2019

entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension

cord suitable for outdoor use. Use of a cord suitable for

outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD) protected

supply. Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power

tool while you are tired or under the inﬂuence of drugs,

alcohol or medication. A moment of inattention while

operating power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in

the off-position before connecting to power source and/

or battery pack, picking up or carrying the tool. Carrying

power tools with your ﬁnger on the switch or energising power

tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the

power tool on. A wrench or a key left attached to a rotating

part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in

unexpected situations.

AFTERSALESSUPPORT

1300 889 028 (toll free) e-mail:

MODEL No.:

[email protected]

AG36 • 8290• 06/2019

f) Dress properly. Do not wear loose clothing or jewellery.

Keep your hair, clothing and gloves away from moving

parts. Loose clothes, jewellery or long hair can be caught in

moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of these devices can reduce

dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the job

better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it

on and off. Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the

battery pack from the power tool before making any

adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach of children and do

not allow persons unfamiliar with the power tool or these

instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding

of moving parts, breakage of parts and any other

condition that may affect the power tool’s operation. If

damaged, have the power tool repaired before use. Many

accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind and

are easier to control.

AFTERSALESSUPPORT

1300 889 028 (toll free) e-mail:

MODEL No.:

[email protected]

AG36 • 8290 • 06/2019

g) Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into account

the working conditions and the work to be performed. Use

of the power tool for operations different from those intended

could result in a hazardous situation.

5) Battery tool use and care

a) Recharge only with the charger speciﬁed by the

manufacturer. A charger that is suitable for one type of battery

pack may create a risk of ﬁre when used with another battery

pack.

b) Use power tools only with speciﬁcally designated battery

packs. Use of any other battery packs may create a risk of injury

and ﬁre.

c) When battery pack is not in use, keep it away from other

metal objects, like paper clips, coins, keys, nails, screws

or other small metal objects, that can make a connection

from one terminal to another. Shorting the battery terminals

together may cause burns or a ﬁre.

d) Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally occurs,

ﬂush with water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the battery may cause

irritation or burns.

6) Service

a) Have your power tool serviced by a qualiﬁed repair person

using only identical replacement parts. This will ensure that

the safety of the power tool is maintained.

Safety instructions for all operations

Safety Warnings Common for Grinding or Abrasive Cutting-

Off Operations:

Inhaltsverzeichnis

Andere Workzone Schleifer Handbücher

Workzone

Workzone Titanium BGS700 Bedienungsanleitung

Beliebte Schleifer Handbücher anderer Marken

Parkside

Parkside PWS 230 C3 Bedienungsanleitung

SUHNER ABRASIVE

SUHNER ABRASIVE ASC 9 Technisches Handbuch

PTA

PTA P1322 Bedienungsanleitung

Crown

Crown CT13313 Bedienungsanleitung

Parkside

Parkside 280250 Bedienungsanleitung

Climax

Climax VM2150 Series Bedienungsanleitung

Jet

Jet JPSG-618M1 Service-Handbuch

Makita

Makita GA4030 Bedienungsanleitung

DeWalt

DeWalt DWEN202 Bedienungsanleitung

Grizzly

Grizzly G2790 Bedienungsanleitung

Fein

Fein MSf843-1a Bedienungsanleitung

Bosch

Bosch GWS 14,4 V PROFESSIONAL Bedienungsanleitung

RAMSET

RAMSET CBAGR18 Bedienungsanleitung

Bosch

Bosch 8-115 Z Bedienungsanleitung

STEELE PRODUCTS

STEELE PRODUCTS SP-PB008 Bedienungsanleitung

MW TOOLS

MW TOOLS ME15W Bedienungsanleitung

Caravaggi

Caravaggi SP 20 Betriebsanleitung

SUHNER ABRASIVE

SUHNER ABRASIVE UWK 10-R125 Technisches Handbuch