Wren 1000 Tall Bedienungsanleitung

WALL UNIT

1000 Tall 2 Door

Assembly Guide

For Internal Use: FI.WR.INS.047_WKIN00132_WALL_1000_2Dr_Tall_Rev3.indd

1000 Tall

WALL UNIT

1000 Tall 2 Door

Assembly Guide

For Internal Use: FI.WR.INS.047_WKIN00132_WALL_1000_2Dr_Tall_Rev3.indd

Page 1

BEFORE YOU START

INSTALLATION

SHOULD BE

PERFORMED BY A

COMPETENT

PERSON ONLY.

THIS PRODUCT COULD

BE DANGEROUS

IF INCORRECTLY

INSTALLED

Panel A

x1 Back Panel

HANGING BRACKET

x2 Inc Screws

(F) x8

Wooden Dowel

REQUIRED TOOLS

NOT to be used

with CAM DOWEL

& CAM LOCK

(G) x8

Cam Dowel

(Expanding)

(H) x8

Cam Lock

(K) x4

30mm

Screw

(P) x4

45mm

Screw

(L) x8

15mm

Screw

(S) x4

20mm

Screw

(M) x4

Cover Cap

(N) x2

Door

Buer

(Z) x10

Shelf Peg

Plastic

(T) x12

Back Panel

Support Clip

HANGING BRACKET PLATE

x2 (Screws NOT included)

HINGE MOUNTING PLATE

x4 Inc Screws

HINGE

x4 Inc Screws

CORNER

GUSSET

HANGING BRACKET

COVER CAP

Panel B

x2 End Panel

Panel C

x2 Base Panel

Frontal

(packed separately)

Muntin D

Loose Shelf

WALL UNIT

1000 Tall 2 Door

Assembly Guide

For Internal Use: FI.WR.INS.047_WKIN00132_WALL_1000_2Dr_Tall_Rev3.indd

Page 2

Step 1.

Seat dowel (F) into holes in

end panel (B) as shown.

Step 2.

Seat cam dowel (G)

into holes in end panel

(B) as shown.

Step 3.

Attach panels x2 (C) to panel

(B), using cam dowels (G)

& cam locks (H) (in blue),

and also using dowels (F)

(in orange) in positions as

shown.

Step 4.

Slide panel (A) into the

groove of panels (B) and

x 2 (C).

NB. All Cam Locks (H) are to be positioned facing the

outside of the unit carcass, for ease of tightening.

Do not use power tools with

cam dowel (G) or cam lock (H)

Dowel (F)

& Cam Dowel (G)

location detail

Seat (G)

cam dowel

into hole as

shown.

View from underside

Step 5.

Insert cam lock (H).

Hand tighten all cam locks

(H), this will expand the

cam dowels (G) and tighten

the unit together.

WALL UNIT

1000 Tall 2 Door

Assembly Guide

For Internal Use: FI.WR.INS.047_WKIN00132_WALL_1000_2Dr_Tall_Rev3.indd

Page 3

Step 6.

Seat dowel (F)

into holes in

both panels (B)

as shown.

Step 7.

Seat cam dowel (G)

into holes in

both end panels (B)

as shown.

Step 8.

Attach panel (B) to panels

& cam lock (H) (in blue)

and also using dowels (F)

(in orange) in positions as

shown. Ensure panel (A) is

seated into the groove of

panel (B).

Step 9.

Insert cam lock (H).

Hand tighten all cam locks

(H), this will expand the

cam dowels (G) and tighten

the unit together.

NB. All Cam Locks (H) are to be positioned facing the

outside of the unit carcass, for ease of tightening.

Dowel (F)

& Cam Dowel (G)

location detail

Do not use power tools with

cam dowel (G) or cam lock (H)

Seat (G)

cam dowel

into hole as

shown.

View from underside

WALL UNIT

1000 Tall 2 Door

Assembly Guide

For Internal Use: FI.WR.INS.047_WKIN00132_WALL_1000_2Dr_Tall_Rev3.indd

Page 4

Step 10.

Ensure carcass is square.

Step 10.

Join muntin panel (D), Both

panels (C) using 4 x 45mm

screws (P) as shown.

126mm

94mm

from base

from top

Step 13.

Attach hinge mounting plates onto end

panels (B) in locations shown

using 4 x screws (L)

Hinge side to be mounted in

accordance to customer kitchen plan.

Step 11.

Slide the back panel clips (T)

into the groove of both panels (B) & (A).

The back panel clips (T) should be evenly

spaced as shown and positioned to allow

the hanging bracket and corner gussets

to be tted. Once in place, tighten screw.

Step 12.

Join muntin

panel (D), to

both panels (C)

using 4 x 45mm

screws (P) as

shown.

WALL UNIT

1000 Tall 2 Door

Assembly Guide

For Internal Use: FI.WR.INS.047_WKIN00132_WALL_1000_2Dr_Tall_Rev3.indd

Page 5

Step a

Insert Hanging

Bracket into pre-drilled holes

Step 14.

Hanging Brackets steps a,b & c to be carried out on both sides as shown

Step c

Secure with provided

2 x 20mm screws (S) per bracket

Step b

Rotate locking

lever 180 degrees

Detail A Detail A Detail A

Step 15.

Secure Corner Gussets

to the bottom left and

right hand side of the

wall unit using

4 x 15mm screws (L)

per plate.

Detail B

Step 16.

Drill a small pilot hole through the centre of the Corner Gussets.

Use this hole at the end of the process to screw through and

into the wall. Cover the screw heads using the cover caps (M)

provided.

Screws for xing to walls are not provided as these vary

depending on your wall material and construction. Ensure

appropriate xings for wall constructions are used.

Pilot

hole

Detail B

View through

back paanel

WALL UNIT

1000 Tall 2 Door

Assembly Guide

For Internal Use: FI.WR.INS.047_WKIN00132_WALL_1000_2Dr_Tall_Rev3.indd

Page 6

Step 17.

Measure appropriately and attach the 2 x hanging bracket plates onto the

wall screwing through the provided holes into your wall.

Screws for xing to walls are not provided as these vary depending

on your wall material and construction. Ensure appropriate xings for

wall construction are used.

Step 18.

Hang the cabinet using

the brackets to hook

onto the plate as shown

Hanging Bracket

Plate

Step 19.

Using points a, b & c adjust the Cabinet to suit.

Step a.

Rotate the screw clockwise

to move the cabinet up.

Anti-clockwise for down.

Step b.

Adjust the depth

using centre

screw.

Step c.

Screw the red screw until it

touches the plate to lock

in position.

Hanging

Bracket

viewed though

Back Panel

C c

Step 20.

Screw into any side units using the

provided 2x 30mm screws (K) to

secure the unit. Screw just to the

rear of the hinge plate then place a

cover cap on the head to conceal it.

WALL UNIT

1000 Tall 2 Door

Assembly Guide

For Internal Use: FI.WR.INS.047_WKIN00132_WALL_1000_2Dr_Tall_Rev3.indd

Page 7

Step 20.

Insert hinge in top & bottom

holes as shown.

Step 21.

Secure hinges by tightening

2 x screws with hinge dowels

attached. These are already

positioned within the hinges.

Step 22.

Attach the door to unit

where required.

To attach door

clip hinge onto hinge

plate and click to secure.

Hinge Cover Caps

Step 24.

Fit cover caps to hinge.

Adjust Softclose to suit.

Step 23.

Adjust hinge to suit. As shown below.

Hinge Plates

View from Inside of Carcass

To adjust hinge using a screw

driver, tighten or loosen as

required at points 1& 2.

Point 1- In - Out

Point 2- side - side

FRONTAL HINGE

ADJUSTMENT

To Release door

Pull catch as shown,

to release hinge

from the hinge

plate.

The top and bottom

hinges MUST be

adjusted to the SAME

STRENGTH.

Inhaltsverzeichnis

Andere Wren Inneneinrichtung Handbücher

Wren

Wren FEATURE CHEST 1 Bedienungsanleitung

Wren

Wren TOWER UNIT Bedienungsanleitung

Wren

Wren FI.PK.FIT.010 Montageanleitung

Wren

Wren 972 L Corner Bedienungsanleitung

Wren

Wren TOWER UNIT 2070 Bedienungsanleitung

Wren

Wren Feature Robe Bedienungsanleitung

Wren

Wren 800 2 Drawer Bedienungsanleitung

Wren

Wren 600 Bedienungsanleitung

Wren

Wren INFINITY PLUS Bedienungsanleitung

Wren

Wren TOWER UNIT Bedienungsanleitung

Wren

Wren TOWER UNIT Bedienungsanleitung

Wren

Wren CHEST 2 Montageanleitung

Wren

Wren FRONTALS INFINITY Bedienungsanleitung

Wren

Wren PEBBLE FI.PK.BED.222.002 Montageanleitung

Wren

Wren 600 Bedienungsanleitung

Wren

Wren UNDER ROBE 1 Montageanleitung

Wren

Wren PEBBLE FI.PK.BED.222.005 Montageanleitung

Wren

Wren 600 Bedienungsanleitung

Wren

Wren INFINITY PLUS FI.PK.BED.111.010 Bedienungsanleitung

Wren

Wren Wall unit Bedienungsanleitung

Wren

Wren INFRAMED KITCHEN Bedienungsanleitung

Wren

Wren FRONTALS Bedienungsanleitung

Wren

Wren 2070 Bedienungsanleitung

Wren

Wren WALL Series Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung