Xantrex 806-1020 Bedienungsanleitung

Freedom HF Inverter/Chargers

Owner’s Guide

Product image shown may vary from actual product. See features for comparisons.

Model Product Numbers

806-1020

806-1054, 806-1054-01

806-1055, 806-1055-02

806-1544

806-1840

806-1840-01 G2 TDN8853

806-1840-01, 806-1840-02

806-1840-03, 806-1840-04

Freedom HF InvChg Owners Guide.book Page i Wednesday, September 13, 2017 6:20 PM

Freedom HF InvChg Owners Guide.book Page ii Wednesday, September 13, 2017 6:20 PM

975-0390-01-01 i

owned by Schneider Electric Industries SAS or its affiliated companies.

Exclusion for Documentation

UNLESS SPECIFICALLY AGREED TO IN WRITING, SELLER

(A)MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY

TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION;

(B)ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR EXPENSES,

WHETHER SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE

OUT OF THE USE OF SUCH INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY

AT THE USER’SRISK; AND

(C)REMINDS YOU THAT IF THIS MANUAL IS IN ANY LANGUAGE OTHER THAN ENGLISH,

ALTHOUGH STEPS HAVE BEEN TAKEN TO MAINTAIN THE ACCURACY OF THE TRANSLATION, THE

ACCURACY CANNOT BE GUARANTEED. APPROVED CONTENT IS CONTAINED WITH THE ENGLISH

LANGUAGE VERSION WHICH IS POSTED AT WWW.XANTREX.COM.

Document Part Number

975-0390-01-01

Date and Revision

September 2017 Rev F

Product Numbers

1000-watt Models:

806-1020 (Freedom HF 1000)

806-1055, 806-1054, 806-1054-01 (Freedom HF 1055)

806-1055-02 (Freedom HF 1055 EMS)

1500-watt Model:

806-1544 (Freedom HF 1500)

1800-watt Models:

806-1840 (Freedom HF 1800)

806-1840-01 G2 TDN8853, 806-1840-01,

806-1840-03, 806-1840-04 (Freedom HF 1800 T)

806-1840-02 (Freedom HF 1800 EMS)

Contact Information

Information About Your System

As soon as you open your product, record the following information and be sure to

keep your proof of purchase.

To view, download, or print the latest revision, visit the website shown under Contact

Information.

Telephone: +1 800 670 0707

+1 408 987 6030

Web: www.xantrex.com

Serial Number _________________________________

Product Number _________________________________

Purchased From _________________________________

Purchase Date _________________________________

Freedom HF InvChg Owners Guide.book Page i Wednesday, September 13, 2017 6:20 PM

ii Freedom HF Owner’s Guide

About This Guide

Purpose

The purpose of this Owner’s Guide is to provide explanations and

procedures for operating, maintaining, and troubleshooting a Freedom HF

Inverter/Charger for Recreational, Fleet Vehicle, or Marine installations.

For complete information to help in installing a Freedom HF Inverter/

Charger see the installation guide, part number 975-0395-01-01.

Scope

The Guide provides safety guidelines, as well as information about

operating and troubleshooting the installation. It does not provide details

about particular brands of batteries. You need to consult individual battery

manufacturers for this information.

Audience

The Guide is intended for users and operators of the Freedom HF Inverter/

Charger.

Conventions Used

The following conventions are used in this guide.

DANGER indicates an imminently hazardous situation, which, if not

avoided, will result in death or serious injury.

WARNING indicates a potentially hazardous situation, which, if not

avoided, can result in death or serious injury.

CAUTION indicates a potentially hazardous situation, which, if not

avoided, can result in moderate or minor injury.

NOTICE indicates a potentially hazardous situation, which, if not

avoided, can result in equipment damage.

IMPORTANT:

These notes describe things which are important for you

to know, however, they are not as serious as a caution or warning.

Freedom HF InvChg Owners Guide.book Page ii Wednesday, September 13, 2017 6:20 PM

975-0390-01-01 iii

Related Information

You can find more information about Xantrex products and services at

www.xantrex.com.

NOTE: The Installation Guide (Document Part Number: 975-0395-01-01)

is intended for qualified personnel. Qualified personnel have training,

knowledge, and experience in:

• Installing electrical equipment and PV power systems (up to 1000

volts).

• Applying all applicable installation codes.

• Analyzing and reducing the hazards involved in performing electrical

work.

• Selecting and using Personal Protective Equipment (PPE).

Freedom HF InvChg Owners Guide.book Page iii Wednesday, September 13, 2017 6:20 PM

iv Freedom HF Owner’s Guide

Important Safety Instructions

IMPORTANT: READ AND SAVE THIS OWNER’SGUIDE

FOR FUTURE REFERENCE.

This chapter contains important safety instructions for the Freedom HF

Inverter/Charger (Freedom HF). Each time, before using the Freedom HF,

READ ALL instructions and cautionary markings on or provided with the

inverter/charger, the batteries, and all appropriate sections of this guide.

NOTE: The Freedom HF contains no user-serviceable parts. See Warranty

Card for guidance.

NOTE: Turning off the inverter/charger using the on/off switch on the front

panel will not reduce an electrical shock hazard.

ELECTRICAL SHOCK HAZARD

• Do not expose the Freedom HF to rain, snow, spray, or bilge water.

This inverter/charger is designed for marine applications only when

additional drip protection is installed in certain orientations. See the

installation guide for information.

• Do not operate the inverter/charger if it has received a sharp blow,

been dropped, has cracks or openings in the enclosure including if the

fuse cover has been lost, damaged, or will not close, or otherwise

damaged in any other way.

• Do not disassemble the inverter/charger. Internal capacitors remain

charged after all power is disconnected.

• Disconnect both AC and DC power from the inverter/charger before

attempting any maintenance or cleaning or working on any circuits

connected to the inverter/charger. See note below.

• Do not operate the inverter/charger with damaged or substandard

wiring. Make sure that all wiring is in good condition and is not

undersized.

Failure to follow these instructions will result in death or serious

injury.

Freedom HF InvChg Owners Guide.book Page iv Wednesday, September 13, 2017 6:20 PM

975-0390-01-01 v

NOTES:

1. Follow these instructions and those published by the battery

manufacturer and the manufacturer of any equipment you intend to use

in the vicinity of the battery. Review cautionary markings on these

products and on the engine.

2. This inverter/charger contains components which tend to produce arcs

or sparks.

3. Locations include any space containing gasoline-powered machinery,

fuel tanks, as well as joints, fittings, or other connections between

components of the fuel system.

FIRE AND BURN HAZARD

• Do not cover or obstruct the air intake vent openings and/or install in

a zero-clearance compartment.

• Do not use transformerless battery chargers in conjunction with the

inverter/charger due to overheating.

Failure to follow these instructions will result in death or serious

injury.

EXPLOSION HAZARD

• Charge only properly rated (such as 12 V) lead-acid (GEL, AGM,

Flooded, or lead-calcium) rechargeable batteries because other

battery types may explode.

• Do not work in the vicinity of lead-acid batteries. Batteries generate

explosive gases during normal operation. See note #1.

• Do not install and/or operate in compartments containing flammable

materials or in locations that require ignition-protected equipment.

See notes #2 and #3.

Failure to follow these instructions will result in death or serious

injury.

Freedom HF InvChg Owners Guide.book Page v Wednesday, September 13, 2017 6:20 PM

vi Freedom HF Owner’s Guide

Precautions When Working With Batteries

NOTES:

1. Mount and place the Freedom HF Inverter/Charger unit away from

batteries in a well ventilated compartment.

2. Always have someone within range of your voice or close enough to

come to your aid when you work near a lead-acid battery.

3. Always have plenty of fresh water and soap nearby in case battery acid

contacts skin, clothing, or eyes.

4. If battery acid contacts skin or clothing, wash immediately with soap

and water. If acid enters your eye, immediately flood it with running

cold water for at least twenty minutes and get medical attention

immediately.

5. Use extra caution to reduce the risk or dropping a metal tool on the

battery. It could spark or short circuit the battery or other electrical

parts and could cause an explosion.

6. Batteries can produce a short circuit current high enough to weld a ring

or metal bracelet or the like to the battery terminal, causing a severe

burn.

7. When removing a battery, always remove the negative terminal from

the battery first for systems with grounded negative. If it is grounded

positive, remove the positive terminal first. Make sure all loads

connected to the battery and all accessories are off so you don’t cause

an arc.

BURN FROM HIGH SHORT-CIRCUIT CURRENT, FIRE

AND EXPLOSION FROM VENTED GASES HAZARDS

• Always wear proper, non-absorbent gloves, complete eye protection,

and clothing protection. Avoid touching your eyes and wiping your

forehead while working near batteries. See note #4.

• Remove all personal metal items, like rings, bracelets, and watches

when working with batteries. See notes #5 and #6 below.

• Never smoke or allow a spark or flame near the engine or batteries.

• Never charge a frozen battery.

Failure to follow these instructions can result in death or serious

injury.

Freedom HF InvChg Owners Guide.book Page vi Wednesday, September 13, 2017 6:20 PM

975-0390-01-01 vii

Precautions When Preparing to Charge

NOTES:

• Study and follow all of the battery manufacturer's specific precautions,

such as removing or not removing cell caps while charging, whether

equalization is acceptable for your battery, and recommended rates of

charge.

• For flooded non-sealed batteries, add distilled water in each cell until

battery acid reaches the level specified by the battery manufacturer.

This helps to purge excessive gas from cells. Do not overfill. For a

battery without removable cell caps, carefully follow manufacturer's

instructions.

Precautions When Placing the Inverter/Charger

EXPOSURE TO CHEMICALS AND GASES HAZARD

• Make sure the area around the battery is well ventilated.

• Make sure the voltage of the batteries matches the output voltage of

the inverter/charger.

• Be careful to keep corrosion from coming into contact with your eyes

and skin when cleaning battery terminals.

Failure to follow these instructions can result in death or serious

injury.

FIRE HAZARD

Do not install the inverter/charger or any part of its supplied wiring in

engine compartments.

Failure to follow these instructions can result in death or serious

injury.

RISK OF DAMAGE TO THE INVERTER/CHARGER

• Never allow battery acid to drip on the inverter/charger when reading

gravity, or filling battery.

• Never place the Freedom HF Inverter/Charger unit directly above

batteries; gases from a battery will corrode and damage the inverter/

charger.

• Do not place a battery on top of the inverter/charger.

Failure to follow these instructions can damage the unit and/or

damage other equipment.

Freedom HF InvChg Owners Guide.book Page vii Wednesday, September 13, 2017 6:20 PM

viii Freedom HF Owner’s Guide

Precautions for Using Rechargeable Appliances

Regulatory

The Freedom HF Inverter/Charger is certified to appropriate US and

Canadian standards. For more information see “Regulatory Approvals” on

page 45.

The Freedom HF Inverter/Charger is intended to be used for mobile or

commercial applications. This inverter/charger is designed for marine

applications only when additional drip protection is installed in certain

orientations. See the installation guide for information.

It is not intended for other applications as it may not comply with the

additional safety code requirements needed for those other applications. See

“Limitations On Use” below.

NOTE: The Freedom HF Inverter/Charger is a modified sine wave inverter/

charger. Please ensure your equipment or devices are compatible with

modified sine wave prior to usage.

RISK OF DAMAGE TO RECHARGEABLE APPLIANCES

Most rechargeable battery-operated equipment uses a separate charger or

transformer that is plugged into an AC receptacle and produces a low

voltage charging output.

Some chargers for small rechargeable batteries can be damaged if

connected to the Freedom HF. Avoid using the following with the

Freedom HF:

• Small battery-operated appliances like flashlights, razors, and night

lights that can be plugged directly into an AC receptacle to recharge.

• Some chargers for battery packs used in power hand tools. These

affected chargers display a warning label stating that dangerous

voltages are present at the battery terminals.

If you are unsure about using your rechargeable appliance with the

Freedom HF, contact the equipment manufacturer to find out if the

appliance is acceptable for use with an inverter that has a modified sine

wave output voltage.

Failure to follow these instructions can damage the unit and/or

damage other equipment.

LIMITATIONS ON USE

Do not use in connection with life support systems.

Failure to follow these instructions can result in death or serious

injury.

Freedom HF InvChg Owners Guide.book Page viii Wednesday, September 13, 2017 6:20 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Xantrex Akkuladegerät Handbücher

Xantrex

Xantrex truecharge 2 series Bedienungsanleitung

Xantrex

Xantrex Truecharge TC10 Bedienungsanleitung

Xantrex

Xantrex Truecharge TC10TB Bedienungsanleitung

Xantrex

Xantrex Freedom 458 Series Bedienungsanleitung

Xantrex

Xantrex XPLORE 120/12 Bedienungsanleitung

Xantrex

Xantrex Truecharge2 804-1220-02 Bedienungsanleitung

Xantrex

Xantrex Truecharge TC1012 Bedienungsanleitung

Xantrex

Xantrex Truecharge TC1012 Bedienungsanleitung

Xantrex

Xantrex Digital echo-charge Bedienungsanleitung

Xantrex

Xantrex 806-1054 Bedienungsanleitung

Xantrex

Xantrex Truecharge 40i Kurzanleitung

Xantrex

Xantrex Freedom Marine Series Bedienungsanleitung

Xantrex

Xantrex XC3012 Bedienungsanleitung

Xantrex

Xantrex Freedom SW 230V 815-3524-02 Bedienungsanleitung

Xantrex

Xantrex Truecharge 20+ Amp Bedienungsanleitung

Xantrex

Xantrex BC3012 Bedienungsanleitung

Xantrex

Xantrex XC Series Bedienungsanleitung

Xantrex

Xantrex Trace DR Series Administratorhandbuch

Xantrex

Xantrex Freedom EX 4000 Bedienungsanleitung

Xantrex

Xantrex XC1524 Bedienungsanleitung

Xantrex

Xantrex Truecharge TC20+ Bedienungsanleitung

Xantrex

Xantrex TrueCharge 2 Bedienungsanleitung

Xantrex

Xantrex Truecharge TC1012 Bedienungsanleitung

Xantrex

Xantrex Freedom XC PRO Series Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung