Xerox Phaser 6200N Bedienungsanleitung

Phaser®6200 Color Laser Printer

Specialty Printing

This section covers:

■Automatic 2-sided printing —see page 10.

■Manual 2-sided printing —see page 12.

■Transparencies —see page 15.

■Envelopes —see page 18.

■Labels, Business Cards, Greeting Cards, CD/DVD Inserts, and CD/DVD Labels —

see page 19.

For a list of the acceptable papers, transparencies, envelopes, and labels that can be used in each tray,

refer to the Supported Papers section of the Trays and Paper Guide on the Interactive Documentation

CD-ROM or print the Paper Tips page from the printer’s front panel.

Automatic 2-sided printing

To have the printer do automatic 2-sided printing (duplexing):

■The printer must be either a Phaser 6200 DP or Phaser 6200 DX model.

■The paper must be loaded in a tray. The printer will NOT do automatic 2-sided printing on paper

loaded in the Multi-Purpose Tray.

■Any supported paper size that is supported in the tray can be duplexed. Any supported paper type

(Plain Paper, Heavy Plain Paper, Letterhead, or Special) that can be loaded in the tray can be

duplexed.

■The paper must have a weight of 75-105 g/m2(20 - 28 lb. bond).

Caution

DO NOT use any specialty media (such as glossy coated paper), envelopes, or labels for

2-sided printing. Any damage caused by duplexing specialty media may not be covered

under your printer warranty.

For best results with automatic 2-sided printing, do not use heavy toner coverage on the even-numbered

pages of your print job.

When you print any job, you can use the printer driver to select the orientation of the images on the

page: Portrait or Landscape. When you print 2-sided jobs, you also select the binding preference,

which determines how the pages turn; refer to the table on page 12 for the wording used in the printer

drivers for binding preference.

Specialty Printing

Phaser®6200 Color Laser Printer 11

To do automatic 2-sided printing:

1. Insert a stack of paper into the tray. For more information, refer to the Trays section of the

Trays and Paper Guide on the Interactive Documentation CD-ROM. Place the side to be

printed with the odd-numbered pages facedown with the top of the page at the back of the tray. If

using paper with pre-punched holes, place the holes toward the right side of the tray.

2. In the printer driver:

■Select the tray containing the paper.

■Select the orientation.

■Select 2-sided printing, as described in the following table.

3. Send the job to the printer.

Portrait

Bind on Side Edge

Flip on Long Edge

Portrait

Bind on Top Edge

Flip on Short Edge

Landscape

Bind on Side Edge

Flip on Short Edge

Landscape

Bind on Top Edge

Flip on Long Edge

6200-58

Specialty Printing

Phaser®6200 Color Laser Printer 12

Manual 2-sided printing

If the printer doesn’t have a duplex unit, you can still have the printer print on both sides of the paper.

However, you must have the printer print all of the odd-numbered pages first, reinsert the printed pages

in the tray, then have the printer print the even-numbered pages.

You can use Trays 1-3 or the Multi-Purpose Tray for manual 2-sided printing.

Paper specifics

■When using the Multi-Purpose Tray, the paper must have a weight of 75 - 216 g/m2(20 - 58 lb.

bond).

■When using the trays, the paper must have a weight of 75 - 105 g/m2(20 - 28 lb. bond).

■For the best opacity and feed reliability, use Plain Paper that is 90 g/m2(24 lb. bond) paper.

■2-sided printing on specialty paper can shorten the life of printer components.

■For best results, do not use heavy toner coverage on side 1 of a manual 2-sided print. Increase the

top margin on side 1 to at least 12 mm (0.48 in.).

■Print quality may be degraded on the second side of manual 2-sided prints.

Setting the printer driver for two-sided printing

Macintosh

LaserWriter 8.6

LaserWriter 8.7

1. From the File menu, select Print.

2. In the Print dialog box, click after General and select Layout from the

pull-down menu.

3. Select Print on Both Sides.

4. Select a binding preference.

Windows 95,

Windows 98, or

Windows Me

1. From the File menu, select Print.

2. Click the Properties button.

3. On the Setup tab, select Print on 2 Sides.

4. Check or uncheck Bind on Top Edge.

Windows 2000

Windows XP

1. From the File menu, select Print.

2. Click the Properties button.

3. On the Layout tab for Print on Both Sides (Duplex), select either

Flip on Long Edge or Flip on Short Edge.

Windows NT 1. From the File menu, select Print.

2. Click the Properties button.

3. On the Page Setup tab for Print on Both Sides (Duplex Printing),

select either Long Edge or Short Edge.

Specialty Printing

Phaser®6200 Color Laser Printer 13

Manual 2-sided printing using Trays 1-3

Printing side 1

1. Insert a stack of paper into the tray. For more information, refer to the Trays section of the

Trays and Paper Guide on the Interactive Documentation CD-ROM. Place the side to be

printed faceup with the top of the page at the front of the tray.

2. In the printer driver, select the tray containing the paper.

3. Send the job to the printer so that the odd-numbered pages (side 1) are printed.

Printing side 2

1. Insert the paper printed with side 1 into the tray. Place the printed side 1 facedown with the top of

the page at the front of the tray; (the side to be printed is faceup).

2. In the printer driver, select the tray containing the paper.

3. Send the job to the printer so that the even-numbered pages (side 2) are printed.

6200-77

6200-78

Specialty Printing

Phaser®6200 Color Laser Printer 14

Manual 2-sided printing using the Multi-Purpose Tray

Printing side 1

1. Insert a stack of paper into the Multi-Purpose Tray. For more information, refer to the Trays

section of the Trays and Paper Guide on the Interactive Documentation CD-ROM. Load the

side to be printed facedown with the top of the page entering the printer first.

2. In the printer driver, select the Multi-Purpose Tray as the paper source.

3. Send the job to the printer so that the odd-numbered pages (side 1) are printed.

Printing side 2

1. Insert the paper printed with side 1 into the Multi-Purpose Tray. Place the printed side 1 faceup

with the top of the page entering the printer first.

2. In the printer driver, select the Multi-Purpose Tray as the paper source.

3. Send the job to the printer so that the even-numbered pages (side 2) are printed.

PHASER6200

6200-56

Specialty Printing

Phaser®6200 Color Laser Printer 15

Transparencies

Transparencies can be printed from Tray 1 or the Multi-Purpose Tray. Handle transparencies by the

edges and with both hands to avoid fingerprints and creases, which can cause poor print quality.

Xerox Phaser® 6200 Transparencies

Xerox recommends that you use Phaser®6200 Transparencies, which have been specifically developed

for use with this type of printer fuser.

To order supplies and accessories, contact your local reseller or visit the Xerox web site at:

www.xerox.com/officeprinting/6200supplies

Using non-Phaser 6200 transparency film

The printer features a unique oil-less fuser. Phaser 6200 Transparency film is designed specifically to

work with the printer's fuser. If you want to use non-Phaser 6200 transparency film, you must use a film

that meets the following specifications:

■Compatible with oil-less fuser systems

■Fusing temperature: 178 degrees C

■Electrical surface resistivity: greater than 7 x 10exp11 ohm/square

Any overhead transparency materials used with this printer must be compatible with the heat and

pressure of the oil-less fusing process. The materials must not discolor, melt, offset, or release

hazardous emissions when heated to 178 degress C for 0.2 seconds.

Overhead transparency materials that do not meet these specifications can produce poor image quality,

produce a jam in the printer, wrap around the fuser rollers and even melt on the fuser rollers. Some

non-Phaser 6200 transparencies have paper tape on the edge that can separate in the heat of the fuser,

leading to damage. Using non-Phaser 6200 transparencies may damage the fuser. Damage caused by

using non-Phaser 6200 transparencies is not covered under the warranty, service agreement, or Total

Satisfaction Guarantee.

Videos are available with instructions for loading transparencies. Videos are located on the

Interactive Documentation CD-ROM and on the Xerox web site at:

www.xerox.com/officeprinting/6200support/

Xerox Phaser®6200 Premium Transparency Film

Size Description Part Number

A/Letter (U. S.)

8.5 x 11 in.

50 sheets 016-1948-00

A4 (Metric Letter)

210 x 297 mm

50 sheets 016-1949-00

Specialty Printing

Phaser®6200 Color Laser Printer 16

Note

Xerox and Xerox Phaser transparency films developed for other Xerox printers and copiers

are not meant to be used with this printer. Using non-Phaser 6200 transparencies may

damage the fuser and might not be covered under the warranty.

Printing transparencies from Tray 1

1. Fan the transparencies to release sheets that are stuck together.

2. Insert the transparencies into the tray. For more information, refer to the Trays section of the

Trays and Paper Guide on the Interactive Documentation CD-ROM.

3. Do not load transparencies above the transparency fill line, because it may cause a jam.

4. When the front panel prompts you to confirm or change the selected paper type:

a. Press the Down Arrow key to scroll to Change, then press the OK key.

b. Scroll to Transparency and press the OK key to save your selection.

5. In the printer driver, select either Tray 1 as the paper source or Transparencies as the paper type.

MAX

6200-59

MAX

Specialty Printing

Phaser®6200 Color Laser Printer 17

Printing transparencies from the Multi-Purpose Tray

1. Fan the transparencies to release sheets that are stuck together.

2. Insert the transparencies into the Multi-Purpose Tray; (maximum capacity is 50 sheets). For more

information, refer to the Trays section of the Trays and Paper Guide on the Interactive

Documentation CD-ROM.

3. When the front panel prompts you to confirm or change the selected paper type and size:

a. Press the Down Arrow key to scroll to Change, then press the OK key.

b. Scroll to Transparency and press the OK key to save your selection.

c. Scroll to the correct paper size and press the OK key to save your selection.

4. In the printer driver, select either Multi-Purpose Tray as the paper source or Transparencies as

the paper type.

6200-54

Specialty Printing

Phaser®6200 Color Laser Printer 18

Envelopes

Guidelines for envelope printing

■Envelopes can only be printed from the Multi-Purpose Tray.

■Use only paper envelopes.

■Do not print on the back of the envelope.

■Keep unused envelopes in their packaging to avoid the effects of moisture and dryness,

which can affect print quality and cause wrinkling. Excessive moisture causes the envelopes

to seal before or during printing.

■Many applications include a tool for creating an envelope document. For example, Microsoft

Word includes an Envelopes and Labels feature in the Tools menu. Be sure to:

■Select facedown.

■Select the feed method with the image centered.

■Clear Clockwise Rotation.

■Load a maximum of 10 envelopes at a time. This printer is not designed to handle

high-capacity production envelope printing.

■Envelopes may wrinkle depending on the weight and stiffness of the envelope. Envelopes

with short flaps work best; longer flaps are more likely to wrinkle.

Caution

Never use envelopes with windows or metal clasps; they can damage the printer. Damage

caused by using unsupported envelopes is not covered by your printer’s warranty.

Printing envelopes

1. Insert the envelopes short-edge feed into the Multi-Purpose Tray. For more information, refer to

the Trays section of the Trays and Paper Guide on the Interactive Documentation CD-ROM.

■Place envelopes with the flap side up and top of the envelope towards the right of the printer.

(For A7 envelopes, place the flap side up but have the top of the envelope enter the printer

first.)

■Maximum capacity is 10 envelopes.

6200-10

Specialty Printing

Phaser®6200 Color Laser Printer 19

2. When the front panel prompts you to confirm or change the selected paper type and size:

a. Press the Down Arrow key to scroll to Change, then press the OK key.

b. Scroll to Envelopes and press the OK key to save your selection.

c. Scroll to the correct envelope size and press the OK key to save your selection.

3. In the printer driver, select either Multi-Purpose Tray as the paper source or Envelopes as the

paper type.

4. Make a test print from your application to confirm that the orientation of your envelope is correct.

Note

The heat from the printing process can melt certain types of envelope glue. If the envelope

flap sticks shut after printing the test print, tuck the flaps inside the envelopes when printing

the remaining envelopes.

Labels, Business Cards, Greeting Cards,

CD/DVD Inserts, and CD/DVD Labels

Labels, business cards, greeting cards, CD/DVD inserts, and CD/DVD labels can only be printed from

the Multi-Purpose Tray. The number of sheets that can be loaded depends on the item.

Refer to the Supplies section of the Support Guide on the Interactive Documentation CD-ROM for

information on part numbers for ordering these items. To order supplies and accessories, contact your

local reseller or visit the Xerox web site at: www.xerox.com/officeprinting/6200supplies

Guidelines

■Do not use vinyl labels.

■If any of the labels, cards, or inserts on a sheet are missing, do not use that sheet; it may

damage printer components.

■Store unused labels, cards, and inserts flat in their original packages.

■Do not store labels, cards, or inserts in extremely dry or humid conditions or extremely hot or

cold conditions. Storing them in extreme conditions may cause them to jam in the printer or

cause print quality problems.

■Rotate stock frequently. Long periods of storage in extreme conditions can cause the labels,

cards, and inserts to curl and jam the printer.

■Print only on one side of the sheet of labels and inserts.

Item Maximum number of sheets

Labels 25

Business cards 25

Greeting cards 25

CD/DVD labels 25

CD/DVD inserts 25

Andere Handbücher für Phaser 6200N

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Xerox Drucker Handbücher

Xerox

Xerox DocuPrint 900 Bedienungsanleitung

Xerox

Xerox DocuPrint 180 NPS Series Technisches Handbuch

Xerox

Xerox VersaLink B400 Bedienungsanleitung

Xerox

Xerox Phaser 3250 Bedienungsanleitung

Xerox

Xerox WorkCentre C2424/DX Bedienungsanleitung

Xerox

Xerox Phaser 6500 Betriebsanleitung

Xerox

Xerox PHASER 3500 Bedienungsanleitung

Xerox

Xerox DocuColor 5252 Stücklistenhandbuch

Xerox

Xerox WorkCentre 5638 Betriebsanleitung

Xerox

Xerox Phaser 3450 Bedienungsanleitung

Xerox

Xerox Phaser 8400 Bedienungsanleitung

Xerox

Xerox 8500N - Phaser Color Solid Ink Printer Bedienungsanleitung

Xerox

Xerox Phaser 4620 Bedienungsanleitung

Xerox

Xerox PHASER 7500 Bedienungsanleitung

Xerox

Xerox 3150 - Phaser B/W Laser Printer Bedienungsanleitung

Xerox

Xerox VersaLink C71 Series Bedienungsanleitung

Xerox

Xerox PHASER 7500 Series Bedienungsanleitung

Xerox

Xerox Docutech 128 Handbuch

Xerox

Xerox DocuColor 7000 Bedienungsanleitung

Xerox

Xerox PHASER 7500 Bedienungsanleitung

Xerox

Xerox 1235/DX - Phaser Color Laser Printer Montage- und Wartungsanleitung

Xerox

Xerox 8080 Installationsanleitung

Xerox

Xerox Phaser 380 Bedienungsanleitung

Xerox

Xerox COLORQUBE 8570 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung