Xerox WorkCentre M24 Color Montageanleitung

Port Setup

Follow this procedure if you want to make any changes to the Port Settings.

If no changes are re-

quire, continue on Step 3.

1. Press “Access” button on the User Interface Control Panel.

2. Enter “System Administrator” Password. (Default – 11111)

3. Press “Confirm”

4. Press “System Settings”

5. Press “System Settings”

6. Press “Network Settings”

7. Select “Port Settings”

8. Select desired Port.

9. Select “Change Settings”

10. Follow Screen instructions to modify the port setting.

11. Select “Close” to return to the “Network Settings” screen and continue with item 7 in Step 3 “Protocol Setup”.

12. If no further changes are required, continue to select “Close” to exit the System Setup.

13. Continue on Step 4.



             

                          

              





Purpose: Refer to this guide to modify the printer network settings at the printer user interface screen if required. For complete instructions

refer to the Customer Documentation CD.

Note: A Network Administrator is required to ensure that the printer is configured properly.

To properly configure the printer, the Network Administrator must supply an IP Address, a Subnet Mask, and a Gateway Address if applicable.

For information to configure the printer on a Novell network refer to the System Administration Guide in the Customer Documentation CD.

Procedure: The WorkCentre M24 has been designed to connect to most networks with minimal changes. Connect the printer to the network

and review the Default Printer Settings. Continue with Steps 2-6 and make changes to the printer port / network settings if required to enable it

on your

network.

- These are the Default Printer Settings

Default Port Settings Default Network Settings

Parallel—Enabled IP Address: Get IP Address (DHCP)

LPD—Enabled Printer Name: FX-0D9496

Netware—Disabled Workgroup: “WORKGROUP”

SMB—Enabled Print Queue: fx-0d9496

IPP—Enabled

Ethertalk—Enabled

Salutation—Enabled

Port 9100—Enabled

SNMP—Enabled

FTP Client—Enabled

Internet Service—Enabled

IP Protocol Setup

Auto IP (DHCP) - No Action required

Follow this procedure if you want to make any changes to the Protocol Settings. If no changes are require, continue on Step 4.

Static IP Configuration

1. Press “Access” button on the User Interface Control Panel.

2. Enter “System Administrator” Password. (Default – 11111)

3. Press “Confirm”

4. Press “System Settings”

5. Press “System Settings”

6. Press “Network Settings”

7. Press “Protocol Settings”

8. Select setting to be changed.

9. Select “Change Settings”

10. Make desired changes

11. Press “Save”

12. Repeat steps 8-11 to make any other changes.

13. Select “Close” to exit.

Print a Settings List

1. Press “Machine Status” button on the User Interface Control Panel.

2. Select Billing Meter / Print Report

3. Select “Print Report / List”

4. Select “Print Mode Settings”

5. Select “Settings List (Common Items)”

6. Press “Start” Button to print a Settings List.

7. Refer to Sample Settings List on opposite page.

Web User Interface Instructions

A PC client connected to the network is required to complete the printer network set-up.

Follow this procedure if you want to make any other changes to the printer configuration.

Procedure

1. Open a web browser (Internet Explorer)

2. Verify that Proxy Servers are being bypassed for local web addresses.

3. Type the TCP/IP address assigned to the printer in the URL window. (Refer to the Settings List for the TCP/IP Address)

4. Select “Properties” Tab.

5. Make desired changes.

Note: Default User Name: admin / Default Password: admin

6. Reboot print server.

7. Print a new Settings List.

Sample

Settings List

Page

Communication Settings

Ethernet Setting

Connection Type Auto

Mac Address 08:xx:xx

TCP/IP

Get IP Address From DHCP / Manual

IP Address xxx.xxx.xxx.xxx

Subnet Mask xxx.xxx.xxx.xxx

Gateway Address xxx.xxx.xxx.xxx

Print Driver Installation information for printing using LPR

Load Print Drivers

Win 95 / 98 / Me

Requires third party Print Utility (Spooler) software to en-

able the creation of an LPR Port.

Windows NT

Add Printer wizard

Add LPR Port

Server Name or Address – Refer to IP Address on the

Settings List.

Name of Printer or Print Queue—”raw”

Windows 2000

Add Printer wizard

Local Printer

Create new port—LPR Port

Server Name or Address – Refer to IP Address on the

Settings List.

Name of Printer or Print Queue—”raw”

Windows XP

Add Printer wizard / Select Local Printer

Create New Port—Standard TCP/IP Port

Server Name / Address – Refer to IP Address on the Settings List.

Select Generic Network Card.

To install software select “Have Disk” and browse to CDROM / WinXP

drivers folder.

Follow screen instructions to complete installation.

SMB

Port Status Enabled

Print Mode Auto

PJL Enabled

Transport Protocol TCP/IP, NetBEUI

TBCP Filter Disabled

Workgroup WORKGROUP (Default)

Host Name FX-0D9496 (Default)

Auto Driver Download Enabled

Auto Master Mode On

Encript Password On

Print Driver Installation for Netware

Refer to the System Administration Guide in the User Documentation CD for complete instructions on loading drivers.

Print Driver Installation information for printing using AppleTalk

Printer Type: Adobe PS

Printer Name: WorkCentre M24

PPD Selection – Double-click the appropriate file in the MAC folder of the Driver

Software CD.

Use AdobePS Inst - 8.7.3 for OS 8.6 or later.

Use AdobePS Inst - 8.7.0 for OS 8.5

Use AdobePS Inst - 8.5.1 for OS 7.1 through 8.1

Follow the on-screen instructions, click “Install”, and restart workstation when prompted.

Open Chooser, select Adobe PS printer, and locate your printer in the displayed list.

Click “Create” for initial installations or “Setup” for all subsequent installations

Click “Select PPD”, highlight your Printer’s PPD, and click “ok”.

For Macintosh OSX

Double-click the MacOSX folder and copy the “.hqx file” to the desktop. Double-click the file to “un-stuff” it. Double-click

the installer file and follow the easy install instructions to install the printer software. Open the Print Center and click “Add

Printer” and follow the instructions to complete the installation.

Refer to the System Administration Guide in the User Documentation CD for complete instructions on loading drivers.

Print Driver Installation information for printing using SMB

Add Printer wizard

Network Printer

Browse Network for printer: Refer to the Settings List for workgroup / printer name.

For Client Server browse network for server / Queue.

Print Queue: “Printer Name”-p (Default: fx-0d9496-p)

For complete instructions on setting up the Printer in a Net BIOS over IP environment (also known as SMB), refer to the Sys-

tem Administration Guide in the User

Documentation CD.

Andere Handbücher für WorkCentre M24 Color

Inhaltsverzeichnis

Andere Xerox Drucker Handbücher

Xerox

Xerox Phaser 200E Bedienungsanleitung

Xerox

Xerox 265 DC Kurzanleitung zur Einrichtung

Xerox

Xerox FS-C8008DN Bedienungsanleitung

Xerox

Xerox Phaser 8560 Betriebsanleitung

Xerox

Xerox Phaser 4510 Betriebsanleitung

Xerox

Xerox 721 Bedienungsanleitung

Xerox

Xerox DocuColor 7000 Bedienungsanleitung

Xerox

Xerox WorkCentre3325 Handbuch

Xerox

Xerox Phaser 3052NI Bedienungsanleitung

Xerox

Xerox VersaLink C400 Bedienungsanleitung

Xerox

Xerox Phaser 3428 Bedienungsanleitung

Xerox

Xerox Synergix 8830 Bedienungsanleitung

Xerox

Xerox PHASER 7500 Bedienungsanleitung

Xerox

Xerox DocuPrint 180 Betriebsanleitung

Xerox

Xerox Phaser 6120N Schulungshandbuch

Xerox

Xerox DocuPrint 4890 IPS Leitfaden

Xerox

Xerox D95 Bedienungsanleitung

Xerox

Xerox DocuPrint P1202 Bedienungsanleitung

Xerox

Xerox Phaser EX7750 Bedienungsanleitung

Xerox

Xerox Phaser 3020 Betriebsanleitung

Xerox

Xerox B210 Bedienungsanleitung

Xerox

Xerox DocuColor 2060 Technisches Handbuch

Xerox

Xerox Phaser 6022 Betriebsanleitung

Xerox

Xerox Phaser 7100 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung