Xiaomi Mi True Wireless Earphones 2 Basic Bedienungsanleitung

Mi True Wireless Earphones 2 Basic

User Manual

Read this manual carefully before use, and retain it for future reference.

Product Overview

Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary

due to product enhancements.

Charging Case

Indicator Light

Touch area

Earphones

Charging Port

Primary Microphone

Secondary Microphone

Instructions

Charging

Charging the earphones

When the earphones are placed in the charging case, they will

automatically start charging.

Charging the charging case

The indicator of the charging case is white during charging and goes

off once it is fully charged.

Checking battery level

Checking the battery level of the earphones

After connecting the earphones to a phone, you can check the

earphone’s battery lever on the phone’s status bar.

Note: The phone’s status bar always displays the battery level of the

earphone with the lowest battery level. This feature is not supported

by some phones.

Checking the battery level of the charrging case

Open the lid of the charging case, or place the earphones into the

charging case:

1) When the indicator light of the charging case stays lit for 5

seconds, it means the battery is suﬃcient.

2) The indicator of the charging case is blinking white, which indicates

that the level of the charging case is low. Please charge immediately.

Checking the battery level by a Mi phone

After successfully connecting to a phone, place the earphones into the

charging case and close its lid. Make sure the Bluetooth function is

enabled on your Mi phone. Hold your phone close to the charging case,

the open the case’s lid. A notiﬁcation will appear on the phone, then you

can check the battery level of the earphones and the charging case.

Note: When checking the battery level on your phone, please update your

Mi phone to the latest stable version. This feature is currently only

supported by some Mi phones.

Turning on

When opening the charging case, the earphones will automatically turn

on.

Note: When using the earphones for the ﬁrst time, place them in the

charging case and close the lid to activate them.

Sleep Mode

Place the earphones back into the charging case and close the lid,

the earphones will disconnect and go into sleep mode automatically.

Wearing

Take the earphones out of the charging case and insert them into

your ears according to the left (L) and right (R) marks.

Note: After using the earphones, place them back into the charging

case. This will extend their lifespan and help you avoid losing or

misplacing them.

Connecting

Connecting the earphones to a new device

1) Place the earphones into the charging case, press and hold the

touch area of either earphone for 3 seconds. The indicator of the

earphones is blinking white and the earphones are waiting for a

connection.

2) Enable the devices Bluetooth, then locate and connect to “Mi TW

Earphones 2 Basic”. If a passcode is requested, enter “0000”.

Connecting the earphones with a Mi phone

Place the earphones into the charging case and close its lid. Make

sure the Bluetooth function is enables on your Mi phone. Hold your

phone close to the charging case, then open the case’s lid. Follow the

on-screen instructions of the phone to connect to the earphones.

Note: The feature of fast connection is currently only supported by some

Mi phones, please update your Mi phone to the latest stable version.

Connection interrupted

When your device is out of wireless range of the earphones or its

Bluetooth function is disabled, the earphones will automatically enter the

awaiting connection mode. If the earphones are not connected to any

device within ﬁve minutes, they will enter sleep mode.

Automatic connection

When the earphones are in the charging case, opening the lid of the

charging case will automatically connect the earphones to the most

recently used Bluetooth device. If the earphones are not connected to

any device within ﬁve minutes, they will enter sleep mode.

Note: If the earphones cannot automatically connect to a device, you will

need to manually connect the earphones to the desired device via the

device’s Bluetooth settings.

Due to the connection characteristics of the Bluetooth signal, in

dense environments with 2.4 GHz electromagnetic signal

interferences, there may be occasional disconnects or no sound.

Clearing connection history

1) Place the left and the right earphone into the charging case.

2) Simultaneously press and hold the touch areas of the left and the

right earphones for seven seconds, then release the touch areas

once the indicators of the earphones light up in white.

3) The earphones have been reset and the connection history has

been cleared. The indicators of the earphones blink white and the

earphones are waiting for a connection.

Function overview

Incoming calls

Gently tap either one of the

earphones twice: Answer/End

calls

Music and voice assistant

While wearing both earphones:

Gently tap the right (R) earphone

twice: Play/Pause Music

Gently tap the left (L) earphone

twice: Access the voice assistant

Taking out the earphone: Pause

music

While earing one earphone: Gently

tap the earphone twice:

Play/Pause music

Notes:

1) The voice assistant can be used only if your device supports

it and this function needs to be granted permission on the

device.

2) When only using the left earphone, place the right earphone

into the charging case and close the lid.

Speciﬁcations

Model: TWSEJ08WM Net Weight: 48 g Input: 5 V 1 A

Charging Port: Type-C Impedance: 32 Ω

Charging Time: Approx. 1,5 h Wireless Connectivity: Bluetooth 5.0

Bluetooth Proﬁles: BLE/HFP/HSP/A2DP/A|VRCP

Supported Audio Codecs: SBC/AAC

Wireless Range: 10 m (open space without obstacles)

Earphone’s Battery Life (standalone): Approx. 5 h

Total Battery Life (with charging case): Approx. 20 h

Bluetooth Operation Frequency: 2402-2480 MHz (for EU)

Maximum Transmit Power for BT: 10 dBm (for EU)

Maximum Transmit Power for BLE: 10 dBm (for EU)

WEEE Information

All products bearing this symbol are waste electrical and

electronic equipment (WEEE as in directive 2012/19/EU)

which should not be mixed with unsorted household

waste. Instead, you should protect human health and the

environment by handing over your waste equipment to a designated

collection point for the recycling of waste electrical and electronic

equipment, appointed by the government or local authorities. Correct

disposal and recycling will help prevent potential negative

consequences to the environment and human health. Please contact

the installer or local authorities for more information about the

location as well as terms and conditions of such collection points.

Hereby Tiinlab declares that the radio equipment type

TWSEJ08WM is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available

at the following internet address:

http://www.mi.com/global/service/support/declaration.html

Safety Caution

• Do not expose batteries or battery packs to excessive heat such as

sunshine, ﬁre or the like.

• Replacement of a battery with an incorrect type that can defeat a

safeguard (such as catching ﬁre, explosion, leakage of corrosive

electrolyte etc.).

• Disposal of a battery into ﬁre or a hot oven, or mechanically crushing

or cutting of a battery, that can result in an explosion.

• Leaving a battery in an extremely high temperature surrounding that

can result in an explosion or the leakage of ﬂammable liquid or gas.

• A battery subjected to extremely low air pressure that may result in an

explosion or the leakage of ﬂammable liquid or gas.

• Risk of explosion if battery is replaced by an incorrect type.

• Dispose of used batteries according to the instructions.

• The product operation maximum ambient temperature is 40°C.

To prevent possible hearing damage, do not listen at high

volume levels for long periods.

The symbol indicates DC voltage

The Bluetooth® word mark and logos are registered trademarks

owned by Bluetooth SIG, Inc. and any use of such marks by Xiaomi

Inc. is under licence. Other trademarks and tradde names are those

of their respective owners.

Manufactured for: Xiaomi Communications Co., Ltd.

Manufactured by: Tiinlab Acoustic Technology Limited (a Mi

Ecosystem company)

Address: Tianliao Building 1403, Tianliao Industrial Area A, Taoyuan

Street, Nanshan District, Shenzhen 518055, China

For further information, please go to www.mi.com

Andere Handbücher für Mi True Wireless Earphones 2 Basic

Inhaltsverzeichnis

Andere Xiaomi Kopfhörer Handbücher

Xiaomi

Xiaomi Redmi Buds 3 Pro Bedienungsanleitung

Xiaomi

Xiaomi Mi True Wireless Earbuds TWSEJ02LM Bedienungsanleitung

Xiaomi

Xiaomi Redmi AirDots 2 Bedienungsanleitung

Xiaomi

Xiaomi Mi 2S Bedienungsanleitung

Xiaomi

Xiaomi Mi True Wireless Earbuds TWSEJ02LM Bedienungsanleitung

Xiaomi

Xiaomi Redmi AirDots Bedienungsanleitung

Xiaomi

Xiaomi Mi True Wireless Earphones TWSEJ01JY Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 3 Lite Bedienungsanleitung

Xiaomi

Xiaomi Mi AirDots Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 3 Pro Bedienungsanleitung

Xiaomi

Xiaomi Mi True Wireless Earphones 2 Basic Bedienungsanleitung

Xiaomi

Xiaomi Mi True Wireless Earphones 2 Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 4 Lite Bedienungsanleitung

Xiaomi

Xiaomi Mi Quantie Pro Bedienungsanleitung

Xiaomi

Xiaomi Mi In-Ear Headphones Pro 2 Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 3 Bedienungsanleitung

Xiaomi

Xiaomi Buds 3 Star Wars Edition Bedienungsanleitung

Xiaomi

Xiaomi Redmi Earbuds S Bedienungsanleitung

Xiaomi

Xiaomi Mi Sports Bluetooth Earphones Bedienungsanleitung

Xiaomi

Xiaomi Mi Sports Bedienungsanleitung

Xiaomi

Xiaomi Mi In-Ear Headphones PRO Bedienungsanleitung

Xiaomi

Xiaomi Mi True TWSEJ03WM Bedienungsanleitung

Xiaomi

Xiaomi Mi Sports Bedienungsanleitung

Xiaomi

Xiaomi Mi 2 Pro Bedienungsanleitung

Beliebte Kopfhörer Handbücher anderer Marken

Sony

Sony MDR-NC8 Bedienungsanleitung

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

Sony

Sony MDR-ED12LP Bedienungsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung