Xiaomi Mi True 2 Basic Bedienungsanleitung

Mi True Wireless Earphones 2 Basic User Manual ·01

Mi True Wireless Kopörer 2 Basic Benutzerhandbuch ·08

Manuel d'utilisation de Mi True Wireless Earphones 2 Basic ·14

Manual de usuario de Mi True Wireless Earphones 2 Basic ·20

Manuale utente Mi True Wireless Earphones 2 Basic ·26

РуководствопользователяПолностьюбеспроводныенаушники-вкладыши Mi 2Basic·32

Bezprzewodowe słuchawki douszne Mi 2 Basic Instrukcja obsługi ·39

Mi 트루 와이어레스 이어폰 2 Basic 사용 설명서 ·45

小米真無線藍牙耳機 2 SE 使用說明書 ·50

Mi 完全ワイヤレスイヤホン 2 Basic取扱説明書 ·55

60· ﻦﻣ ﺔﻴﻜﻠﺳﻼﻟا ﻚﻴﺴﻳﺎﺑ 2 وﺮﺗ نذأ تﺎﻋﺎﻤﺳ ـﻟ مﺪﺨﺘﺴﻤﻟا ﻞﻴﻟد Mi

Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Xiaomi Mi True Wireless

Earphones 2 Basic o cerca il tuo prodotto tra le migliori offerte di Cuffie e Microfoni

Read this manual carefully before use, and retain it for future reference.

Product Overview

Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary

due to product enhancements.

Charging Case

Charging Port

Indicator Light

Earphones

Primary Microphone

Secondary Microphone

Touch Area

Indicator Light

Instructions

Charging

●Charging the earphones

When the earphones are placed in the charging case, they will

automatically start charging.

●Charging the charging case

The indicator of the charging case is white during charging, and goes

oﬀ once it is fully charged.

Checking Baery Level

●Checking the baery level of the earphones

Aer connecting the earphones to a phone, you can check the

earphones' baery level on the phone's status bar.

Note: The phone's status bar always displays the baery level of the

earphone with the lowest baery level. This feature is not supported

by some phones.

●Checking the baery level of the charging case

Open the lid of the charging case, or place the earphones into the

charging case:

①When the indicator light of the charging case stays lit for 5

seconds, it means the baery is suﬃcient.

② The indicator of the charging case is blinking white, which

indicates that the baery level of the charging case is low.

Please charge it immediately.

●Checking the baery level by a Mi phone

Aer successfully connecting to a phone, place the earphones into

the charging case and close its lid. Make sure the Bluetooth function

is enabled on your Mi phone. Hold your phone close to the charging

case, then open the case's lid. A notiﬁcation will appear on the

phone, then you can check the baery level of the earphones and the

charging case.

Note: When checking the baery level on your phone, please update

your Mi phone to the latest stable version. This feature is currently

only supported by some Mi phones.

Turning On

When opening the charging case, the earphones will automatically

turn on.

Note: When using the earphones for the ﬁrst time, place them in the

charging case and close the lid to activate them.

Sleep Mode

Place the earphones back into the charging case and close the lid,

the earphones will disconnect and go into sleep mode automatically.

Wearing

Take the earphones out of the charging case, and insert them into

your ears according to the le (L) and right (R) marks.

Note: Aer using the earphones, place them back into the charging

case. This will extend their lifespan and help you avoid losing or

misplacing them.

Connecting

Connecting the earphones to a new device

①Place the earphones into the charging case, press and hold the

touch area of either earphone for 3 seconds. The indicator of

the earphones is blinking white, and the earphones are waiting

for a connection.

②Enable the device's Bluetooth, then locate and connect to "Mi TW

Earphones 2 Basic". If a passcode is requested, enter "0000".

●Connecting the earphones with a Mi phone

Place the earphones into the charging case and close its lid. Make

sure the Bluetooth function is enabled on your Mi phone. Hold your

phone close to the charging case, then open the case's lid. Follow the

on-screen instructions of the phone to connect to the earphones.

Note: The feature of fast connection is currently only supported by

some Mi phones, please update your Mi phone to the latest stable

version.

●Connection interrupted

When your device is out of wireless range of the earphones or its

Bluetooth function is disabled, the earphones will automatically enter

the awaiting connection mode. If the earphones are not connected

to any device within ﬁve minutes, they will enter sleep mode.

●Automatic connection

When the earphones are in the charging case, opening the lid of the

charging case will automatically connect the earphones to the most

recently used Bluetooth device. If the earphones are not connected

to any device within ﬁve minutes, they will enter sleep mode.

Note: If the earphones cannot automatically connect to a device,

you will need to manually connect the earphones to the desired

device via the device's Bluetooth seings.

Due to the connection characteristics of the Bluetooth signal, in dense

environments with 2.4 GHz electromagnetic signal interferences, there

may be occasional disconnects or no sound.

Clearing connection history

① Place the le and the right earphone into the charging case.

②Simultaneously press and hold the touch areas of the le and the

right earphones for seven seconds, then release the touch areas once

the indicators of the earphones light up in white.

③The earphones have been reset and the connection history has

been cleared. The indicators of the earphones blink white, and the

earphones are waiting for a connection.

Function Overview

●Incoming calls

Gently tap either one of the

earphones twice: Answer/End calls

●Music and voice assistant

While wearing both earphones:

Gently tap the right (R) earphone

twice: Play/Pause music

Gently tap the le (L) earphone

twice: Access the voice assistant

Taking out an earphone: Pause

music

While wearing one earphone:

Gently tap the earphone twice:

Play/Pause music

Notes:

①The voice assistant function can be used only if your device

supports it, and this function needs to be granted permission on

the device.

②When only using the le earphone, place the right earphone into

the charging case and close the lid.

Hereby, Tiinlab declares that the radio equipment type

TWSEJ08WM is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the

following internet address:

hp://www.mi.com/global/service/support/declaration.html

Safety Caution

· Do not expose baeries or baery packs to excessive heat such as

sunshine, ﬁre or the like.

· Replacement of a baery with an incorrect type that can defeat a

safeguard (such as catching ﬁre, explosion, leakage of corrosive

electrolyte etc).

· Disposal of a baery into ﬁre or a hot oven, or mechanically crushing

or cuing of a baery, that can result in an explosion.

· Leaving a baery in an extremely high temperature surrounding

environment that can result in an explosion or the leakage of

ﬂammable liquid or gas.

· A baery subjected to extremely low air pressure that may result in

an explosion or the leakage of ﬂammable liquid or gas.

· Risk of explosion if baery is replaced by an incorrect type.

· Dispose of used baeries according to the instructions.

· The product operation maximum ambient temperature is 40°C.

Speciﬁcations

Model: TWSEJ08WM Net Weight: 48 g Input: 5 V 1 A

Charging Port: Type-C Impedance: 32 Ω Charging Time: Approx.1.5h

Wireless Connectivity: Bluetooth 5.0

Bluetooth Proﬁles: BLE/HFP/HSP/A2DP/AVRCP

Supported Audio Codecs: SBC/AAC

Wireless Range: 10 m (open space without obstacles)

Earphones' Baery Life (standalone): Approx. 5 h

Total Baery Life (with charging case): Approx. 20 h

Bluetooth Operation Frequency: 2402–2480 MHz (for EU)

Maximum Transmit Power for BT: 10 dBm (for EU)

Maximum Transmit Power for BLE: 10 dBm (for EU)

WEEE Information

All products bearing this symbol are waste electrical and

electronic equipment (WEEE as in directive 2012/19/EU)

which should not be mixed with unsorted household

waste. Instead, you should protect human health and the

environment by handing over your waste equipment to a designated

collection point for the recycling of waste electrical and electronic

equipment, appointed by the government or local authorities. Correct

disposal and recycling will help prevent potential negative

consequences to the environment and human health. Please contact

the installer or local authorities for more information about the

location as well as terms and conditions of such collection points.

To prevent possible hearing damage, do not listen at

high volume levels for long periods.

The symbol indicates DC voltage

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment oﬀ and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit diﬀerent from

that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modiﬁcations not expressly approved by the

party responsible for compliance could void the user’s authority to

operate the equipment.

This device complies with Industry Canada license-exempt RSS

standard(s).

Operation is subject to the following two conditions: (1) this device

may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired

operation of the device.

The device is too small to bear the label information, and we list the

label contents on package and user manual as well.

The marking information is located at the boom of apparatus.

FCC ID : 2ASDITWSEJ08WM

IC: 24662-TWSEJ08WM

HVIN: V7

CAN ICES-3(B)/NMB-3(B)

Manufactured for: Xiaomi Communications Co., Ltd.

Manufactured by: Tiinlab Acoustic Technology Limited

(a Mi Ecosystem company)

Address: Tianliao Building 1403, Tianliao Industrial Area A, Taoyuan

Street, Nanshan District, Shenzhen 518055, China

For further information, please go to www.mi.com

The Bluetooth® word mark and logos are registered trademarks

owned by Bluetooth SIG, Inc. and any use of such marks by Xiaomi Inc.

is under license. Other trademarks and trade names are those of

their respective owners.

Lesen Sie dieses Handbuch vor der Verwendung sorgfältig durch, und bewahren Sie es für die spätere Verwendung auf.

Produktübersicht

Abbildungen des Produkts, des Zubehörs und der Benutzeroberﬂäche in der Bedienungsanleitung dienen nur als Referenz. Die tatsächlichen

Produkte und Funktionen können aufgrund von Produktverbesserungen variieren.

Ladebehälter

Ladeanschluss

Anzeigeleuchte

Kopörer

Primäres Mikrofon

Sekundäres Mikrofon

Touch-Bereich

Anzeigeleuchte

Anweisungen

Laden

●Auﬂaden des Kopörers

Sobald der Ohrhörer auf den Ladebehälter platziert wird, beginnt die

Auﬂadung automatisch.

●Auﬂadung des Ladebehälters

Die Anzeige der Ladeschale ist während des Ladevorgangs weiß und

erlischt, sobald sie vollständig aufgeladen ist.

Akkuladestand überprüfen

●Überprüfung des Baeriestands des Ohrhörers

Nachdem Sie die Kopörer an ein Telefon angeschlossen haben,

können Sie den Akkustand der Kopörer in der Statusleiste des

Telefons überprüfen.

Hinweis: Die Statusleiste des Telefons zeigt immer den Akkustand

des Kopörers mit dem niedrigsten Akkustand an. Diese Funktion

wird von einigen Telefonen nicht unterstützt.

●Überprüfung des Baeriestands des Ladebehälters

Öﬀnen Sie den Deckel der Ladeschale oder legen Sie die Kopörer in

die Ladeschale:

①Auﬂeuchten der Anzeigeleuchte für 5 Sekunden bedeutet, dass

der Baeriestand ausreicht.

②Die Anzeige der Ladeschale blinkt weiß, sie zeigt an, dass der

Ladezustand der Ladeschale niedrig ist. Bie laden Sie sie sofort

wieder auf.

●Überprüfung des Akkuzustandes mit einem Mi-Telefon

Nach erfolgreicher Verbindung mit einem Telefon legen Sie die

Kopörer in die Ladeschale und schließen Sie den Deckel.

Vergewissern Sie sich, dass die Bluetooth-Funktion auf Ihrem

Mi-Telefon aktiviert ist. Halten Sie Ihr Telefon nahe an die Ladeschale

und öﬀnen Sie dann den Deckel der Ladeschale. Eine Benachrichti-

gung erscheint am Telefon, dann können Sie den Akkustand der

Kopörer und die Ladehülle überprüfen.

Hinweis: Wenn Sie den Akkustand Ihres Telefons überprüfen,

aktualisieren Sie bie Ihr Mi-Telefon auf die neueste stabile Version.

Diese Funktion wird derzeit nur von einigen Mi-Telefonen unterstützt.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Xiaomi Kopfhörer Handbücher

Xiaomi

Xiaomi Mi True Wireless Earbuds TWSEJ02LM Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 3 Pro Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 4 Bedienungsanleitung

Xiaomi

Xiaomi Mi True Wireless Earphones TWSEJ01JY Bedienungsanleitung

Xiaomi

Xiaomi Mi 2 Pro Bedienungsanleitung

Xiaomi

Xiaomi Mi In-Ear Headphones Pro 2 Bedienungsanleitung

Xiaomi

Xiaomi Mi True Wireless Earphones 2 Basic Bedienungsanleitung

Xiaomi

Xiaomi Mi True Wireless Earphones 2 Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 3 Bedienungsanleitung

Xiaomi

Xiaomi Mi Sports Bluetooth Earphones Bedienungsanleitung

Xiaomi

Xiaomi Mi Sports Bedienungsanleitung

Xiaomi

Xiaomi Mi Sports Bedienungsanleitung

Xiaomi

Xiaomi Mi AirDots Bedienungsanleitung

Xiaomi

Xiaomi Mi True Wireless Earbuds TWSEJ02LM Bedienungsanleitung

Xiaomi

Xiaomi Mi 2S Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 4 Lite Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 3 Pro Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 3 Lite Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 3 Bedienungsanleitung

Xiaomi

Xiaomi Mi In-Ear Headphones PRO Bedienungsanleitung

Xiaomi

Xiaomi Buds 3 Star Wars Edition Bedienungsanleitung

Xiaomi

Xiaomi MI Redmi Bud 3 Pro Bedienungsanleitung

Xiaomi

Xiaomi Mi True TWSEJ03WM Bedienungsanleitung

Xiaomi

Xiaomi Buds 3T Pro Bedienungsanleitung

Beliebte Kopfhörer Handbücher anderer Marken

Sony

Sony MDR-NC8 Bedienungsanleitung

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

Sony

Sony MDR-ED12LP Bedienungsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung