Xiaomi Redmi Buds 3 Pro Bedienungsanleitung

Redmi Buds 3 Pro

User Manual

Read this manual carefully before use, and retain it for future reference.

Product Overview

Charging

Charging the earbuds

When the earbuds are placed in the charging case, they will automatically start charging.

Charging the charging case

Use the included type-C charging cable to charge the charging case, or place it on a

compatible wireless charger with the indicator facing upwards. The indicator is white

while charging, and turns off when charging is completed.

Note: Please use a power adapter that meets the local certification requirements, or a

wireless charger that supports charging at 5 W or higher.

How to Use

Secondary Microphone

Primary Microphone

Earbud

Function Button

Charging Case

Charging Port

Indicator

The center of the wireless charger must be aligned with the center of the charging case in

order to charge, which is about 8 mm above the Redmi logo on the back of the charging

case. The charging case's indicator will be lit while charging.

Note: Illustrations of the product, accessories, and user interface in the user manual are for

reference purposes only. The actual product and functions may vary due to product

enhancements.

Checking the battery level

Checking the battery level of the earbuds

After connecting the earbuds to a phone, you can check the earbuds' battery level on the

phone's status bar.

Note: Only the battery level of the earbud with the lowest battery level of the two is

displayed on the phone's status bar. This feature is not supported by some phones.

Type-C Wireless ChargingType-C Wired Charging

This logo is for location

indication only.

Checking the battery level of the charging case

When the lid of the charging case is closed, press the function button or open the lid of

the charging case to check the battery level:

1. When the charging case's indicator is white for about 5 seconds, it indicates the battery

level is sufficient.

2. When the charging case's indicator light is blinking white, it indicates its battery level is

low and it should be charged immediately.

Checking the battery level with a Mi phone

After successfully connecting to a phone, place the earbuds into the charging case and

close its lid. Ensure the Mi phone is unlocked and its Bluetooth is enabled, and hold it

close to the charging case, then open the case's lid. A popup to check the battery levels

of the earbuds and the charging case will appear on the phone.

Note: To use the feature to quickly check the battery level, the phone's system needs to be

updated to the latest stable version. Currently, only some Mi phones support this feature.

Turning on the earbuds

Opening the charging case will automatically turn on the earbuds.

Sleep mode

Place the earbuds back into the charging case and close the lid, then the earbuds will

disconnect and enter sleep mode automatically.

Wearing the earbuds

Take the earbuds out of the charging case, and insert them into your ears according to the

left (L) and right (R) marks.

Note: After using the earbuds, place them back into the charging case. This will extend their

service life and helps to avoid losing or misplacing them.

Connecting to a new device

1. Place the earbuds into the charging case, then press and hold the function button for

about two seconds. The charging case's indicator light will start blinking white to indicate

that the earbuds are awaiting a connection.

2. Enable the device's Bluetooth, then search for and connect to the "Redmi Buds 3 Pro".

If a passcode is requested, enter "0000".

Using quick pairing to connect to a Mi phone

Place the earbuds into the charging case and close its lid. Ensure the Mi phone is unlocked

and its Bluetooth is enabled, and hold it close to the charging case, then open the case's lid

and follow the instructions on the phone to connect to the earbuds.

Note: To use the feature to quickly connect, the phone's system needs to be updated to the

latest stable version. Currently, only some Mi phones support this feature.

Connecting to two devices

The earbuds can be connected to two different Bluetooth devices simultaneously. After

connecting the earbuds to the first device, put them in the charging case and open the lid.

Press and hold the function button on the charging case for two seconds, then the indicator

will start blinking white, and the earbuds are ready to be paired with a second device.

How to Connect

Disconnecting

When a device's Bluetooth is disabled, or if the earbuds are out of range, the earbuds will

automatically enter awaiting connection mode. If the earbuds remain disconnected from

the device for 10 minutes, they will enter sleep mode. Wearing the earbuds again will wake

them up and they will enter awaiting connection mode.

Automatic connection

When the earbuds are in the charging case, opening the lid of the charging case will

automatically connect the earbuds to the most recently used Bluetooth device. If no

connection history is detected, or if the earbuds cannot successfully connect to any

Bluetooth device, the earbuds will automatically enter the awaiting connection mode.

Note: If the earbuds cannot automatically connect to a device, you will need to manually

connect the earbuds to the desired device via the device's Bluetooth settings.

Restoring factory settings

1. Place the earbuds into the charging case.

2. Press and hold the function button for at least ten seconds until the indicator turns white,

then release the button.

3. The factory settings of the earbuds have been restored, the connection history has

been cleared, the charging case's indicator blinks white, and the earbuds are in pairing

mode again.

Note: Due to the technical characteristics of Bluetooth, there may be occasional

intermittent loss of connection or sound in areas with dense electromagnetic signal

interference at 2.4 GHz.

Specifications

Name

Model

HVIN

Charging Port

Net Weight

Impedance

Earbud Input

Wireless Earphones

TWSEJ01ZM

TWSEJ01ZM-L

TWSEJ01ZM-R

Type- C

Approx. 55 g

32 Ω

5.25 V=120 mA Max. (per earbud)

Functions

During calls

Gently tap either earbud twice: Answer call

Gently tap either earbud three times: Reject/End call

Music

Gently tap either earbud twice: Play/Pause

Gently tap either earbud three times: Next song

Take out either earbud: Pause music

Noise cancellation

Press and hold either earbud to switch between:

Enable noise cancellation <> Transparency mode

To prevent possible hearing loss, do not use this product at high volume for long

periods of time.

Earbud Battery Capacity/Energy

Charging Case Battery Capacity/Energy

Charging Case Input

Wireless Connectivity

Bluetooth Profiles

Operating Range

Bluetooth Operation Frequency

Maximum Output Power for BT

Maximum Output Power for for BLE

Wireless Charging Operating Frequency

Operating Temperature

Charging Time (Charging Case)

35 mAh/0.13 Wh (per earbud)

470 mAh/1.78 Wh

Wired Input: 5 V=500 mA Max.

Wireless Input: Supports wireless chargers of 5 W or

higher

Bluetooth 5.2

Bluetooth® Low Energy/HFP/A2DP/AVRCP

10 m (in an obstacle-free environment)

2400–2483.5 MHz(for EU)

≤13 dBm (for EU)

110–148K Hz

5°C to 40°C

Approx. 2.5 hours (by charging cable)

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,

Inc. and any use of such marks by Xiaomi inc. is under license. Other trademarks and trade

names are those of their respective owners.

The Qi logo is a registered trademark of the Wireless Power Consortium.

Do not attempt to disassemble, repair or modify the product, as this may cause fire or

even completely damage the product.

Do not expose the product to environments with a temperature that is too low or too high

(below 0°C or above 45°C).

Keep the product's indicator away from the eyes of children and animals while the product

is in use.

Do not use this product during thunderstorms. Thunderstorms may cause the product

to malfunction and increase the risk of electric shocks.

Do not clean this product with alcohol or other volatile liquids.

Avoid any contact with liquids.

Do not disassemble, puncture or crush the product nor expose it to fire.

Stop using the product immediately if there is any swelling.

To prevent possible hearing loss, do not use high volume for long periods of time.

Do not use the earbuds while driving, and comply with the relevant regulations in your

region or country.

These earbuds and their accessories may contain small parts. Please keep them out of

the reach of children.

Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a

battery, that can result in an explosion.

Leaving a battery in an extremely high temperature surrounding environment that can

result in an explosion or the leakage of flammable liquid or gas.

A battery subjected to extremely low air pressure that may result in an explosion or the

leakage of flammable liquid or gas.

Product information and certification marks are located in the Charging Case.

Warning

Hereby, Zimi Corporation declares that the radio equipment type TWSEJ01ZM

is in compliance with Directive 2014/53/EU. The full text of the EU declaration

of conformity is available at the following internet address:

http://www.mi.com/global/service/support/declaration.html

EU Declaration of Conformity

All products bearing this symbol are waste electrical and electronic equipment

(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted

household waste. Instead, you should protect human health and the

environment by handing over your waste equipment to a designated collection

point for the recycling of waste electrical and electronic equipment, appointed

by the government or local authorities. Correct disposal and recycling will help

prevent potential negative consequences to the environment and human health.

Please contact the installer or local authorities for more information about the

location as well as terms and conditions of such collection points.

WEEE Information

Do not put the battery in trash that is disposed of in landfills. When disposing of the

battery, comply with local laws or regulations.

Replacement of a battery with an incorrect type that can defeat a safeguard (such as

catching fire, explosion, leakage of corrosive electrolyte etc).

This equipment complies with RF radiation exposure limits set forth for an uncontrolled

environment.

The symbol indicates DC voltage

Andere Handbücher für Redmi Buds 3 Pro

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Xiaomi Kopfhörer Handbücher

Xiaomi

Xiaomi Mi True Wireless Earphones 2 Bedienungsanleitung

Xiaomi

Xiaomi Mi Quantie Pro Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 4 Bedienungsanleitung

Xiaomi

Xiaomi Mi 2S Bedienungsanleitung

Xiaomi

Xiaomi Mi Sports Bedienungsanleitung

Xiaomi

Xiaomi Mi True Wireless Earphones 2 Bedienungsanleitung

Xiaomi

Xiaomi Mi AirDots Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 3 Bedienungsanleitung

Xiaomi

Xiaomi One More Bedienungsanleitung

Xiaomi

Xiaomi Mi True Wireless Earbuds TWSEJ02LM Bedienungsanleitung

Xiaomi

Xiaomi Mi True Wireless Earphones 2 Basic Bedienungsanleitung

Xiaomi

Xiaomi Mi In-Ear Headphones Pro 2 Bedienungsanleitung

Xiaomi

Xiaomi MI Redmi Bud 3 Pro Bedienungsanleitung

Xiaomi

Xiaomi Mi Sports Bluetooth Earphones Bedienungsanleitung

Xiaomi

Xiaomi Mi In-Ear Headphones PRO Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 3 Pro Bedienungsanleitung

Xiaomi

Xiaomi Mi True Wireless Earphones 2 Basic Bedienungsanleitung

Xiaomi

Xiaomi Redmi AirDots Bedienungsanleitung

Xiaomi

Xiaomi Mi 2 Pro Bedienungsanleitung

Xiaomi

Xiaomi Mi True Wireless Earphones TWSEJ01JY Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 3 Lite Bedienungsanleitung

Xiaomi

Xiaomi Mi Sports Bedienungsanleitung

Xiaomi

Xiaomi Redmi Buds 3 Bedienungsanleitung

Xiaomi

Xiaomi Mi True Wireless Earbuds TWSEJ02LM Bedienungsanleitung

Beliebte Kopfhörer Handbücher anderer Marken

Sony

Sony MDR-NC8 Bedienungsanleitung

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

Sony

Sony MDR-ED12LP Bedienungsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung