XINDAK C06 Bedienungsanleitung

CD Player

C06

INSTRUCTIONS

Caution!!!

To reduce the risk of electrical shock, DO NOT remove cover. No user-serviceable parts inside. Refer

servicing to qualified personnel.

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to presence of uninsulated “Dangerous voltage”

within the product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

Dangerous Voltage

The exclamation point within an equilateral triangle is intended to alert the

user to presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

Important Instructions

Marking by the CE symbol shown left

indicates compliance of this device with the

EMS Electrornagnetic Compatibility and

LVD low voltage directive) standards of the

European Community.

" " ( )

( )

(

Please read all instructions and precautions carefully and

completely before operating your C06 CD-Player. Then,

please keep this manual for referring in future.

Recommend this unit only for family using.

CD player

Unit.

Chapter 1 Important Safety Instruction

Unpack your C06 CD Player and keep all packing materials for future transport or service, locate and remove all

accessory items from the accessory box within the controller shipping carton.

Accessories Included:

Please read all instructions and precautions carefully and completely before operating your C06 CD Player.

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Always keep this unit out of the reach of children.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus ( including amplifiers) that

produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they

exit from the apparatus.

10. Unplug this apparatus during lightning storms or when unused for a long time.

11. Always disconnect your entire system from the AC mains before connecting or disconnecting any cable, or when cleaning any

component.

12. This product must be terminated with a three conductor AC mains power cord which includes an earth ground connection, to

prevent shock hazard, all three connections must always be used.

13. AC extension cords are not recommended for use with this product.

14. Never use flammable or combustible chemicals for cleaning audio components.

15. Never operate this product with any cover removed.

16. Never pour or spill liquids directly onto this unit.

17. Never block air flow through ventilation slots or heat sinks.

18.Never by pass any fuse.

19. Never replace any fuse with a value or type other than those specified.

20. Never attempt to repair this product, if a problem occurs, contact your dealer.

21. Never expose this product to extremely high or low temperatures.

22. Never operate this product in an explosive atmosphere.

1. AC power cord × 1 2. Remote controller × 1 3. User manual (This manual)

1.2 Check Accessory

Chapter 1

1.1 Before Use

Important Safety Instruction

2.1 Precaution In Use

2.2 Condensation

Precaution

，

Fig.1

receiver

Chapter 2

2.3 Compact Discs

This player can play back the CD-RW (Re-Writable) discs as well as ordinary Audio CD and CD-R (Recordable) discs.

Please do not play the CD which is not round, otherwise it may cause fault on this player.

Precaution

Supported Disc

CD CD-R CD-RW

iDO NOT USE the special shape disc or metamorphic disc

Chapter 2

AAA Batteries

Install Batteries

Before using the remote controller for the first time, you need install

the new battery in the remote controller.

1. Use the tool to remove the rear cover of the remote control unit.

3. Reinstall the rear cover of the remote control unit.

1. Do not use new and old batteries simultaneously.

2. Batteries with similar shapes may have different rated voltages

Be sure to use the correct batteries.

3. Remove batteries from the remote control unit if it will not be used

for a long period of time.

Process

Battery Replacement

2. Install the 2 batteries (AAA) polarity.

1. Use the tool remove the rear cover of the remote control unit.

2. Take out the old batteries from remote control unit.

. Install the 2 batteries (AAA) polarity.

4. Reinstall the rear cover of the remote control unit.

Caution

If you use the remote control unit to control the amplifier:

1.The remote control range is approximately 5 meters.

2.Pointing the remote control on an angle to the receiver, will

shorten the useful distance of the remote control.

with correct +/-

3 with correct +/-

Using Remote Controller

Incorrect use of batteries

n shorter battery life.

may cause corrosion or damage.

The lower temperature, the

2.4 For Using the Remote Controller

Install Batteries

Precaution

Battery Reclaim

Please send the waste batteries to local battery

reclaim center. DO NOT discard the waste

batteries discretionarily, in order to avoid

environment pollution.

Chapter 2

2.5 Remote Controller

Precaution

Chapter 2

7. Search Forward

When button is pressed during play, the CD player will begin to scan

forward with the speed 4 times of the normal speed. When the button is kept

to pressed for 4 seconds or longer, the CD player will begin to scan forward

with 8 times speed of normal. Then release the pressure, the unit will resume

normal play.

8. Search Backward

When button is pressed during play, the CD player will begin to scan

backward with the speed 4 times of the normal speed. When the button is

kept to pressed for 4 seconds or longer, the CD player will begin to scan

backward with 8 times speed of normal. Then release the pressure, the unit

will resume normal play.

9.Stop Play

Press button to stop play.

10. Pause Play

Press button to stop play temporarily.

;

11.Play

Press button to start play.

12. Skip Forward

Press button, the CD player will skip to the beginning of the next

track.

13. Previous Track

Press button, the CD player will skip to the beginning of the previous

track.

14. Repeat A to B (Chapter 4.4)

15 16. Volume Control : No use for this unit

、

17. Preview Play

Press this button to begin the track intro scan (10 seconds). The player

will play the first 10 seconds of every track. Press the button ‘Clear’ to

cancel this operation.

18. Switch the channel: No use for this unit

19. DIMMER

Press this button to adjust the lighteness of alphanumeric display window as

the order: High-lightness, mid-lightness,low-lightness,close.

19. Open/Close

Press button to open or close to slide the disc tray out or in.

2. Number Select

Press the number button 1 to 9 to choose the corresponding

song to play. Press two number buttons within 2 seconds to

choose the track number more than 9. For example, press 1

and 2 within 2 seconds, it will skip to No.12 song and play it. If

the number chose exceeds the number range of disc, this

chose will be recognized useless and the player will remain

the current work model.

3.Clear/Cancel

Cancel the function operation.

4.Program Play (Chapter 3.3)

5. Random Play (Chapter 3.6).

6. Repeat play (Chapter 3.4)

1.SACD/CD switch:

No use for this unit

Precaution

2.6 Front Panel

11. NEXT

6. STOP

10. PLAY

8. PAUSE

Chapter 2

1. IR Sensor

2. P Swi chower t

3 ower I. P ndicator

4. Alphanumeric Display

5. DISC Tray

9. PRE

7. OPEN/CLOSE

This indicator will be light when this unit is switched on.

1 2 4 5

39 108 116 7

2.7 Rear Panel

Audio Output Terminal

2.Digital Coaxial Output Terminal

Fuse Socket

Output the analog stereo audio signal amplified by tube to the input port on the amplifier.

By connecting this jack with digital coaxial cable to output the digital signal to the DAC or receiver.

Connect the power cord to the AC inlet.

Use to install the fuse.

4.AC input socket

Chapter 3

3.1 The Connection

The CD player has two audio output models: digital signal output and analog signal output.

Analog Signal Output Digital Signal Output

You can choose the better connection model considering your

audio system.

1. Coaxial Audio Output

Please use coaxial signal cable to connect the coaxial output port

of this unit and make sure the reliability and correctness of the

connection.

The Connection of Analog Output The Connection of Digital Output

Operation Instruction

DAC

Chapter 3

3.2 Start Play

3.3 Program Play

3.4 Repeat Play

Before enjoying the music, please confirm that the connection has been ready as the previous chapter indicated. After that, you can begin to

enjoy the music.

1. Turn on the CD player. After about 30 seconds for warm-up, then press the button to slide the disc tray out, and load a disc on the disc

tray. Press the button again to slide the disc tray in. And the display will show the number and total playing time. The player is ready to play.

2. Press the button to start playing with the first track. Press this button during playing, the player will skip to the beginning of the current

track and play it.

3. Press the button to stop play temporarily. Press it again or press the button, the player will continue to play.

4. Press the button to stop play.

To play the disc as the order you edited

1. Press the button ‘ PROGRAM’ on the remote control during stop to enter the program play model. The display will glisteningly show “

PROG”.

2. Press the button skip forward/backward or directly press the number buttons to enter the track number you want. Then press the button

‘PROGRAM’ to store. The display will show “ 02 00”.

3. Repeat the operation 2 to continue editing the track order.

4. After the edit finished, press the button to play as the order you edited.

5. Press the button ‘ CLEAR’ to cancel the program play.

To repeat the track you chose

1. Repeat all/one selections

Press the button ‘REPEAT’ during playing, the player will switch round among following three models:

Repeat one selection (display ) Repeat all selection (display ALL Cancel the repeat“ ” “ ”

2. Repeat A to B

Press this button during play to mark the Apoint, then the display A . Press this button again to mark the end-point (repeat within 3 seconds

is invalid), then the display shows AB . The player will skip to the A point and repeat playing A to B. Press this button again, repeat will be

canceled.

3. Starting repeat, the sign for repeat will light.

4. Press the button ‘ Clear “ to cancel the repeat.

“ ”

Operation Instruction

Inhaltsverzeichnis

Andere XINDAK CD-Player Handbücher

XINDAK

XINDAK MUSE DELUXE 1.0 Bedienungsanleitung

Beliebte CD-Player Handbücher anderer Marken

RCA

RCA RP-7923 Bedienungsanleitung

Pioneer

Pioneer DEH-P3550MP XM Bedienungsanleitung

Philips

Philips AZ1207 Bedienungsanleitung

Philips

Philips CD582 Bedienungsanleitung

Philips

Philips AZ 6821 Bedienungsanleitung

Lasonic

Lasonic MSU-2020 Bedienungsanleitung

THOMSON

THOMSON RCD150 Bedienungsanleitung

Denon

Denon DCD-1420 Bedienungsanleitung

Panasonic

Panasonic SJ-MR100 Bedienungsanleitung

Onkyo

Onkyo DX-7210 Bedienungsanleitung

Sony

Sony MZ-R3 Bedienungsanleitung

Denon

Denon DVM-4800 Bedienungsanleitung

JBL

JBL MR-32 Bedienungsanleitung

RCA

RCA RCD152 Bedienungsanleitung

Technics

Technics SL-PS770A Bedienungsanleitung

Clarion

Clarion compact disc Bedienungsanleitung

Sony

Sony MZ-M10 Bedienungsanleitung

Philips

Philips Expanium AZ 1538 Bedienungsanleitung