Xirgo Technologies XT4964 Bedienungsanleitung

1
XT4964 User Guide
Model: XT4964
FCC ID: GKM-XT4975A
IC: 10281A-XT4975A
Revision 1

2
Table of Contents
Document Change History ..........................................................................................3
1 Introduction ............................................................................................................4
1.1 Feature Matrix................................................................................................................................................................................. 4
2 Hardware Description..............................................................................................5
2.1 Hardware Specifications............................................................................................................................................................. 6
2.2 Cable Harness Description......................................................................................................................................................... 7
2.3 LED Description.............................................................................................................................................................................. 7
3 Device Mounting Options ........................................................................................8
3.1 Screw Mounting.............................................................................................................................................................................. 8
3.2 3M VHB Tape Mounting .............................................................................................................................................................. 8
3.3 Trailer Cradle Mounting.............................................................................................................................................................. 9
3.4 Container Cradle Mounting........................................................................................................................................................ 9
3.5 Device Mounting Guidelines....................................................................................................................................................10
4 Quick Start Guide................................................................................................... 12
4.1 Device Wakeup .............................................................................................................................................................................12
4.2 Configuring the Device via SMS..............................................................................................................................................13
4.3 Configuring the Device via PC.................................................................................................................................................13
4.4 Download Over the Air (DOTA) Firmware Update Guide...........................................................................................14
Regulatory Statements ............................................................................................. 15

3
Document Change History
Revision
Date
Author
Changes
1
10/24/2019
Johnny Chen
Document Creation based off “XT4975A User Guide v2”
2
11/13/2019
Johnny Chen
Removed Zigbee referenced due to removal of Zigbee HW support

4
1 Introduction
The XT4964 is a solar energy harvesting cellular and GPS tracking device supporting long term,
remote deployments without the need to replace the rechargeable battery. This user guide describes
the physical hardware, associated parts, the different mounting options available, and a quick start-up
procedure.
1.1 Feature Matrix
Feature Description
Base Unit
LTE Cellular Communication
✓
GPS Receiver for Tracking Applications
✓
Supports SMS, TCP, UDP, FTP
✓
Over-the-air Configuration and FW Upgrade
✓
Location Polling
✓
Periodic Reporting
✓
Wired or Virtual Ignition On/Off Reporting
✓
Direction Change Alerts
✓
Speed Threshold Alerts
✓
Mileage Threshold Alerts
✓
Main Battery Disconnect Alerts
✓
Heartbeat and Power-up/Reset Alerts
✓
Ignition Idle Alert (wired ignition only)
✓
Towing Start/Stop Alerts(wired ignition only)
✓
Movement Start/Stop Alerts (wired ignition only)
✓
2 Digital Inputs
✓
Park Time Alerts (wired ignition only)
✓
Virtual Odometer
✓
Motion
✓
Sleep/Wake Configuration Settings
✓
Geofence (Radial, Rectangular, and Polygonal)
✓
Device Diagnostics (Battery voltage, connectivity, etc.)
✓
Wireless Sensor Connectivity
✓

5
2 Hardware Description
Below is a depiction of key interfaces of the XT4964:
The Associated Cable Harness that interfaces with the unit is shown below:
Solar Panel
Device/FCC Label
Wake-up
Button
8-Pin Bayonet
Connector
Gore Vent
LED Indicators

6
2.1 Hardware Specifications
Cellular Technology Options
4G LTE Cat 4
▪4G LTE FDD bands: 1, 2, 3, 4, 5, 7, 8, 12, 13, 18, 19, 20, 26, 28
▪4G LTE TDD bands: 38, 39, 40, 41
3G UMT/HSDPA/HSUPA
▪Band 1, 2 ,5, and 8
2G GSM/GPRS/EDGE
▪850 MHz, 900 MHz, 1800 MHz, and 1900 MHz
GPS Specification
Receiver tracking Sensitivity
▪-157 dBm
Accuracy
▪+/- 1.5 m CEP (Open Sky; 50%; at -130 dBm, > 6 Satellites)
Cold Start
▪35 sec
Hot Start
▪1.8 sec
Power Requirements
D.C. Power
▪8-24V, 12 V nominal
Current Consumption
(4V Supply internal Battery)
▪170 µA in sleep state
▪80 mA in idle state
▪240mA in transmit/receive state
Max. Solar Charge Current
▪150mA
Internal Battery
▪Internal 10 Ah rechargeable Li-Ion
Physical Connection
Interface Connector
▪8-pin attached harness
Cellular/GPS Antenna
▪Internal
SIM Access
▪Internal
Programming
▪Serial (RS232 3V logic level)
Mechanical
Case Material
▪PC and PBT composite
Dimension
▪4.7” X 8.5” X 1.1”
Weight
▪24 oz.
Operating Temperature
▪-40°C to +70°C
Certifications
Product
▪PTCRB
▪FCC
▪IC
▪CE
▪IP69K
Carrier
▪AT&T

7
2.2 Cable Harness Description
Pin #
Wire Color
Pin Name
Functional Description
Port Characteristic
1
Blue
VBATT
Ignition Sense
8v to 24v, Internally pulled low
2
Brown
GND
Ground
2.4 to 24V, < 0.2 V
Note: Internally pulled high
3
Yellow
IN2
4
Black
ADC2
8-24 V
5
White
RS232 RX
RS232 Receive Port
3V Logic Interface
Com Port Settings:
Baud rate: 115200 bps; Flow control:
None; 8N1
6
Green
RS232 TX
RS232 Transmit Port
3V Logic Interface
Com Port Settings:
Baud rate: 115200 bps; Flow control:
None;8N1
7
Red
OUT
Output Port (Default Open)
8
White/Black
ADC1
Analog Input
8-24 V
2.3 LED Description
LED
Description
Status
Cellular (Blue)
No Carrier/Denied Registration
OFF
Searching for Cellular Network
Fast Blinking
Registered Roaming
Medium Blinking
Registered Home
Slow Blinking (1Hz)
GPS (RGB Green)
Searching for satellite
Solid
GPS Lock
Slow Blinking (1 Hz)

8
3 Device Mounting Options
3.1 Screw Mounting
The XT4964 has two flanges (two holes per) at each end of the housing for screw mounting the
device to the mounting surface.
3.2 3M VHB Tape Mounting
For a semi-permanent option, the device can be mounted with 3M VHB tape as shown below:

9
3.3 Trailer Cradle Mounting
An optional trailer mounting cradle can be purchased for easy device mounting for the XT4964.
The cradle will need to be screw-mounted or VHB Tape mounted to the position desired. The
XT4964 can be easily fastened into the cradle via a Phillips head screw. The angled edged of the
cradle is designed to withstand the impact of snow scrapers that may come in contact to the
cradle if mounted on the top of a typical trailer. Inside the body of the cradle where the device sits
are four drain holes. Do not use the drain holes for screw mounting cradles to surfaces.
3.4 Container Cradle Mounting
An optional container cradle can be purchased for easy device mounting for the XT4964. The
container cradle is designed for VHB Tape mounting only. The XT4964 can be easily fastened into
the cradle via a Phillips head screw. The shape of the cradle is designed to fit in the corrugations
of an ISO standard freight container. Inside the body of the cradle where the device sits are four
drain holes. Do not use the drain holes for screw mounting cradles to surfaces.
DRAIN HOLES
DRAIN HOLES

10
3.5 Device Mounting Guidelines
The XT4964 Series devices leverage solar energy to replenish the charge of its battery. Please
consider the device mounting guidelines to maximize device solar charging. Also, the XT4964
series uses cellular and GPS technologies whose signal reception quality is depending on
mounting location and style. Adhering to these guidelines will optimize the field performance of
the XT4964:
•If possible, have the solar panel facing directly towards the noon sun. At least have the
solar panel no greater than 90° away from the noon sun.
•Avoid mounting the XT4964 were shadows may cast upon the solar panel
•Avoid placing unit inside a container made from any conductive materials or partially
mounted into a bracket made from any conductive materials. Doing so may potentially
degrade GPS and cellular reception.
•Avoid mounting the XT4964 in low locations where dirt, grease, or any other staining
particles can be introduced by rotating wheels. Excess dirt, grease, or staining materials on
the solar panel will reduce the amount of charge the device can receive.
•Avoid mounting the XT4964 to locations that are high risk to predictable physical harm.
(I.e. do not mount the unit on the top of an asset if snow scrapers are utilized in periodic
maintenance of the asset without some sort of protective bracket)
Inhaltsverzeichnis
Andere Xirgo Technologies GPS Handbücher


















