Xirgo Technologies XT4970D Bedienungsanleitung
1
XT4970D Series User Guide
Model: XT4970D
FCC ID: GKM-XT4970D
IC: 10281A-XT4970D
Version 1.1
2
Table of Contents
Document Change History ..........................................................................................3
1 Introduction ............................................................................................................4
1.1 Feature Matrix................................................................................................................................................................................. 4
2 Hardware Description ..............................................................................................5
2.1 Hardware Specifications............................................................................................................................................................. 6
2.2 Cable Harness Description......................................................................................................................................................... 7
2.3 LED Description.............................................................................................................................................................................. 7
3 Device Mounting Options ........................................................................................8
3.1 Screw Mounting.............................................................................................................................................................................. 8
3.2 3M VHB Tape Mounting .............................................................................................................................................................. 8
3.3 Trailer Cradle Mounting.............................................................................................................................................................. 9
3.4 Container Cradle Mounting........................................................................................................................................................ 9
3.5 Device Mounting Guidelines....................................................................................................................................................10
4 Quick Start Guide................................................................................................... 11
4.1 Device Wakeup .............................................................................................................................................................................11
4.2 Configuring the Device via SMS..............................................................................................................................................12
4.3 Configuring the Device via PC.................................................................................................................................................12
4.4 Download Over the Air (DOTA) Firmware Update Guide...........................................................................................13
3
Document Change History
Revision
Date
Author
Changes
1.0
11/25/2015
Johnny Chen
Document Creation based off XT4970D Series User Guide v3.2
4
1 Introduction
The XT4970D is a solar energy harvesting cellular and GPS tracking device supporting long term,
remote deployments without the need to replace the rechargeable battery. This user guide describes
the physical hardware, associated parts, the different mounting options available, and a quick start-up
procedure.
1.1 Feature Matrix
Feature Description
Base Unit
LTE Cellular Communication
GPS Receiver for Tracking Applications
Supports SMS, TCP, UDP, FTP
Over-the-air Configuration and FW Upgrade
Location Polling
Periodic Reporting
Wired or Virtual Ignition On/Off Reporting
Direction Change Alerts
Speed Threshold Alerts
Mileage Threshold Alerts
Main Battery Disconnect Alerts
Heartbeat and Power-up/Reset Alerts
Ignition Idle Alert (wired ignition only)
Towing Start/Stop Alerts(wired ignition only)
Movement Start/Stop Alerts (wired ignition only)
2 Digital Inputs
Park Time Alerts (wired ignition only)
Virtual Odometer
Motion
Sleep/Wake Configuration Settings
Geofence (Radial, Rectangular, and Polygonal)
Device Diagnostics (Battery voltage, connectivity, etc.)
Wireless Sensor Connectivity
5
2 Hardware Description
Below is a depiction of key interfaces of the XT4970D:
The Associated Cable Harness that interfaces with the unit is shown below:
Solar Panel
Device/FCC Label
Wake-up/
ZigBee Pairing
Button
Zigb
8-Pin Bayonet
Connector
LED Indicators
6
2.1 Hardware Specifications
Cellular Technology Options
LTE
4G LTE bands: 2,4,5,13, and 17
GSM
3G UMTS Bands 850/1900 MHz
GPS Specification
Receiver 50 channels
72 channels
Receiver tracking Sensitivity
-167 dBm
Accuracy
+/- 2.0 m CEP (50% , -130 dBm, > 6 Satellites)
Cold Start
26 sec
Hot Start
1 sec
Power Requirements
D.C. Power
8-24V, 12 V nominal
Current Consumption
(4V Supply internal Battery)
170 µA in sleep state
80 mA in idle state
240mA in transmit/receive state
Max. Solar Charge Current
150mA
Internal Battery
Internal 10600mAh rechargeable Li-Ion
Physical Connection
Interface Connector
8-pin attached harness
Cellular/GPS Antenna
Internal
SIM Access
Internal
Programming
Serial (RS232 3V logic level)
Mechanical
Case Material
PC and PBT composite
Dimension
4.7” X 8.5” X 1.1”
Weight
24 oz.
Operating Temperature
-40°C to +70°C
Certifications
Product
PTCRB
FCC
IC
IP66/IP67
Carrier
AT&T
Verizon
7
2.2 Cable Harness Description
Pin #
Wire Color
Pin Name
Functional Description
Port Characteristic
1
Blue
VBATT
Ignition Sense
8v to 24v, Internally pulled low
2
Brown
GND
Ground
2.4 to 24V, < 0.2 V
Note: Internally pulled high
3
Yellow
IN2
4
Black
ADC2
8-24 V
5
White
RS232 RX
RS232 Receive Port
3V Logic Interface
Com Port Settings:
Baud rate: 115200 bps; Flow control:
None; 8N1
6
Green
RS232 TX
RS232 Transmit Port
3V Logic Interface
Com Port Settings:
Baud rate: 115200 bps; Flow control:
None;8N1
7
Red
OUT
Output Port (Default Open)
8
White/Black
ADC1
Analog Input
8-24 V
2.3 LED Description
LED
Description
Status
Cellular (Blue)
No Carrier/Denied Registration
OFF
Searching for Cellular Network
Fast Blinking
Registered Roaming
Medium Blinking
Registered Home
Slow Blinking (1Hz)
GPS (RGB Green)
Searching for satellite
Solid
GPS Lock
Slow Blinking (1 Hz)
Zigbee (Auburn)
Pairing Process Initiated
Fast Blinking
8
3 Device Mounting Options
3.1 Screw Mounting
The XT4970D has two flanges (two holes per) at each end of the housing for screw mounting the
device to the mounting surface.
3.2 3M VHB Tape Mounting
For a semi-permanent option, the device can be mounted with 3M VHB tape as shown below:
9
3.3 Trailer Cradle Mounting
An optional trailer mounting cradle can be purchased for easy device mounting for the XT4970D.
The cradle will need to be screw-mounted or VHB Tape mounted to the position desired. The
XT4970D can be easily fastened into the cradle via a Phillips head screw. The angled edged of the
cradle is designed to withstand the impact of snow scrapers that may come in contact to the
cradle if mounted on the top of a typical trailer.
3.4 Container Cradle Mounting
An optional container cradle can be purchased for easy device mounting for the XT4970D. The
cradle will need to be screw-mounted or VHB Tape mounted to the position desired. The
XT4970D can be easily fastened into the cradle via a Phillips head screw. The shape of the cradle
is designed to fit in the corrugations of an ISO standard freight container.
10
3.5 Device Mounting Guidelines
The XT4970D Series devices leverage solar energy to replenish the charge of its battery. Please
consider the device mounting guidelines to maximize device solar charging. Also, the XT4970D
series uses cellular and GPS technologies whose signal reception quality is depending on
mounting location and style. Adhering to these guidelines will optimize the field performance of
the XT4970D:
If possible, have the solar panel facing directly towards the noon sun. At least have the
solar panel no greater than 90° away from the noon sun.
Avoid mounting the XT4970D were shadows may cast upon the solar panel
Avoid placing unit inside a container made from any conductive materials or partially
mounted into a bracket made from any conductive materials. Doing so may potentially
degrade GPS and cellular reception.
Avoid mounting the XT4970D in low locations where dirt, grease, or any other staining
particles can be introduced by rotating wheels. Excess dirt, grease, or staining materials on
the solar panel will reduce the amount of charge the device can receive.
Avoid mounting the XT4970D to locations that are high risk to predictable physical harm.
(I.e. do not mount the unit on the top of an asset if snow scrapers are utilized in periodic
maintenance of the asset without some sort of protective bracket)
Inhaltsverzeichnis
Andere Xirgo Technologies GPS Handbücher
