XM XMP3 Bedienungsanleitung

Car Kit Installation Guide

Table of Contents

Introduction ..................3

Welcome to XM .........................3

What’s in the box?.......................3

Remote control functions ...............4

Vehicle Installation ........... 5

Step 1: Plan the installation............. 6

Step 2: Mount the XM car antenna ...... 7

Step 3: Install the swivel or vent mount . 10

Step 4: Connect your XMp3 radio. ......12

Step 5: Turning on your XMp3 radio. ....14

Find an FM frequency...................15

Set the line out level. ...................17

Place XM car antenna for best reception. 18

Automatic power. ......................19

Power oﬀ. ..............................20

Troubleshooting ..............21

Product Specs, FCC and IC info,

Warranty ....................25

Product Speciﬁcations..................26

FCC and IC Statement ..................27

Warranty...............................28

Patent information .....................31

Environmental information.............31

Welcome to XM

Thank you for purchasing the XMp3™ Radio Car Kit. This guide walks you through the

installation of your new car kit and helps get you set up and listening fast.

What’s in the box?

car cradle

power adapter swivel mountvent mount swivel mount

preparation kit

remote control

audio cable XM car antenna

Introduction

Remote Control functions

30-Minute Replay Buttons

Pause and replay up to 30

minutes of live XM content.

Power Button

Record

Record a song or channel.

Arrow Buttons

Select menu entries,

change channels.

Options

TuneSelect, bookmarks, add

channel to favorites, set

channel to auto record, and

view programs for channel.

XM Button/Select

Press to confirm selections.

Back

Return to previous screen.

Press and hold to return

to the previous channel.

Jump

Switches between current

channel and previous channel.

Go to My Music Library,

access advanced features

and configuration options

or info extras information.

Number Keys

Enter a channel directly.

+ and -

Change channels or control

volume for audio system

(sold separately).

Mute

Silences live, saved songs,

and replayed XM content.

Vehicle Installation

Step 1: Plan the Installation

Select an area on the dashboard you want to place the car cradle. This is where1

you will install the swivel or vent mount.

TIP! An adhesive pad is used to mount the swivel mount to the dashboard. The adhesive

requires 24 hours to cure. Make sure you provide yourself the proper amount of time to

install your car kit. See Step 3: Install the Swivel or Vent Mount for more information.

Determine which connection method you plan to use in order to receive the2

XM signal:

Audio Cable (Included)•

XM SureConnect (sold separately)•

Cassette Adapter (sold separately)•

FM Direct Adapter (sold separately)•

WARNINGS:

When using this product, it is always important to keep your eyes on the road and hands•

on the wheel. Not doing so could result in personal injury, death, and/or damage to your

XMp3 radio, accessories, and/or to your vehicle or other property.

Your XMp3 radio should be placed in your vehicle where it will not interfere with•

the function of safety features, e.g., deployment of airbags. Failure to correctly place

your XMp3 radio may result in injury to you or others, if the unit becomes detached

during an accident and/or obstructs the deployment of an airbag.

Step 2: Mount the XM Car Antenna

1 Place the car cradle on the dashboard. You will connect it to the swivel or vent

mount later on.

Select a suitable location on the outside of your car for the XM car antenna.2

For example, on the roof near the windshield or rear window.

TIP! When selecting a location, consider any accessories that your car has, such as a

luggage rack, and how often you use the accessories. Select a location where the XM car

antenna won’t be covered or blocked as this could interfere with signal reception.

Gently place the XM car antenna in the location3

you selected. The antenna has a strong magnet

that sticks to any metallic surface.

TIP! Make sure the door does not pinch the cable when closed.

TIP! Always cross the weather seals at the lowest point possible to reduce water leaks.

TIP! Always hand wash or use brushless or touch-free car washes.

Magnet

4. Route the cable:

 • IfyouplacedtheXMcarantennaonthe front of the vehicle, route the cable

across the top of the windshield. Gently pry up the rubber weather seal

and tuck the cable underneath. Follow the weather seal down the side

of the windshield to the door jam. Tuck the cable into the door jam and

then under the ﬂoormat to the car cradle.

   •IfyouplacedtheXMcarantennaontherearofthevehicle,routethecable 

under the weather seal of the rear window. Tuck the antenna cable around

and down the window to the lowest point, just above the trunk.

Vehicle Installation

Next, route the cable from the rear window molding into the weather stripping•

around the trunk opening. Run the cable into the trunk and then into the rear

passenger compartment. Route the cable through the main compartment by tucking

it under the door jam trim or under the carpet and up to the radio.

5 Make sure any excess cable does not interfere with vehicle operations.

TIP! Always be careful to include enough slack in your cable to accommodate open doors

or trunk lids. Use things typically found around the home, like electrical tape, to secure

cables in areas so that hinges do not pinch the cable with the door. Hide any excess cable in

the trim.

Step 3: Install the swivel or vent mount

You can use either the included swivel mount or vent mount for your XMp3 radio depending

on your vehicle interior.

Installing the swivel mount

CAUTION! The adhesive used with the swivel mount may make it diﬃcult to remove. Do not

install this mount on leather surfaces and make sure the air temperature is at least 60°F (15°C)

during installation.

1 Locate a ﬂat surface for the mount. Make sure there is ample room for the XM

cradle and radio when installed.

2 Clean the surface with the preparation kit and let it dry thoroughly.

3Peel oﬀ the adhesive liner. Position, press, and hold the swivel mount in place

for 30 seconds.

IMPORTANT! Let the adhesive cure for 24 hours before attaching the XM cradle and

radio to the mount.

4Turn the swivel to accommodate the XM cradle and radio. Adjust the tension

via the center screw.

Vehicle Installation

You can adjust this screw

to adjust the tension of the

mount with a screwdriver.

Andere Handbücher für XMP3

Inhaltsverzeichnis

Andere XM Autozubehör Handbücher

XM Xpress RC Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung