Xterra TR6.55 Bedienungsanleitung

OWNER’S MANUAL

TR6.55 Treadmill

Product Registration……………………………………………………………………….. 2

Important Safety Instructions…………………………………………………………….. 3

Important Electrical Information………………………………………………………….. 4

Important Operation Instructions…………………………………………………………. 5

Assembly instructions…………….………………………………………………………… 6

Operation of Your New Treadmill………………………………………………..………. 10

General Maintenance.……………….………………………………………….………… 19

Manufacturer’s Limited Warranty………………………………………………………… 23

Table of Contents

TR6.55 Treadmill

Thank you for your purchase of this quality treadmill from Xterra. Your new treadmill

has been manufactured by one of the leading fitness manufacturers in the world and is

backed by one of the most comprehensive warranties available. Xterra will do all we

can to make your ownership experience as pleasant as possible for many years to

come.

If you have questions, or if parts are missing or damaged, or you require customer

service, call (870) 935-1107. Please have your Model number and serial number handy

when you call.

Please take a moment at this time to record below the name of the store, their

telephone number, and the date of purchase for easy contact in the future. We

appreciate your confidence in Xterra and we will always remember that you are the

reason that we are in business. Please complete and mail your registration card today

and enjoy your new treadmill.

Yours in Health,

The folks at Xterra Fitness

Name of Dealer______________________________________

Telephone Number of Dealer___________________________

Purchase Date_______________________________________

RECORD YOUR SERIAL NUMBER

Please record the Serial Number of this fitness product in the space provided below.

Serial Number_______________________________________

The self-addressed product registration card must be completed in full and returned to Xterra

fitness, or visit: www.xterrafitness.com to register online.

TR6.55_20110829

Product Registration

CONGRATULATIONS ON YOUR

NEW TREADMILL AND WELCOME

TO THE

XTERRA

FAMILY!

TR6.55 Treadmill

WARNING - Read all instructions before using this appliance.

DANGER - To reduce the risk of electric shock disconnect your Xterra treadmill from the

electrical outlet prior to cleaning and/or service work.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the

treadmill on a flat level surface with access to a 120-volt, 15-amp grounded outlet.

DO NOT USE AN EXTENSION CORD UNLESS IT IS 14AWG OR BETTER, WITH ONLY ONE

OUTLET ON THE END. The treadmill should be the only appliance in the circuit in which it is

connected. DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING IMPROPER

ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET. A serious shock or fire hazard may

result along with computer malfunctions. See Grounding Instructions, page 4.

Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both

carpet and treadmill may result.

Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance

between the rear of the treadmill and any fixed object.

Keep children away from the treadmill. There are obvious pinch points and other

caution areas that can cause harm.

Keep hands away from all moving parts.

Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not working

properly, call your dealer.

Keep the cord away from heated surfaces.

Do not operate where aerosol spray products are being used or where oxygen is

being administered. Sparks from the motor may ignite a highly gaseous environment.

Never drop or insert any object into any openings.

Do not use outdoors.

To disconnect, turn all controls to the off position, remove tether cord, then remove the plug

from the outlet.

Do not attempt to use your treadmill for any purpose other than for the purpose it is

intended.

The pulse sensors are not medical devices. Various factors, including the user’s

movement, may affect the accuracy of heart rate readings. The pulse sensors are

intended only as exercise aids in determining heart rate trends in general.

Use handrails provided; they are for your safety.

Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable

for use on your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.

Remove tether cord after use to prevent unauthorized treadmill operation.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

Important Safety Instructions

TR6.55 Treadmill

WARNING!

NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any

appliance with a large motor, the GFCI will trip often. Route the power cord away from any

moving part of the treadmill including the elevation mechanism and transport wheels.

NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent

(10%) or more, the performance of your treadmill may be affected. Such conditions are not

covered under your warranty. If you suspect the voltage is low, contact your local power

company or a licensed electrician for proper testing. See Diagnosis Guide, page 26.

NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors,

near a pool or spa, or in any other high humidity environment. The temperature specification is

40 degrees c, and humidity is 95%, non-condensing (no water drops forming on surfaces).

Circuit breakers: Some circuit breakers used in homes are not rated for high inrush currents that

can occur when a treadmill is first turned on or even during normal use. If your treadmill is tripping

the house circuit breaker (even though it is the proper current rating) but the circuit breaker on the

treadmill itself does not trip, you will need to replace the home breaker with a high inrush type. This

is not a warranty defect. This is a condition we as a manufacture have no ability to control. This

part is available through most electrical supply stores. Examples: Grainger part # 1D237, or

available online at www.squared.com part # QO120HM.

This product must be grounded. If the treadmill’s electrical system should malfunction or

breakdown grounding provides a path of least resistance for electric current, reducing the risk of

electric shock. This product is equipped with a cord having an equipment-grounding plug. The

plug must be plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a

risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt

as to whether the product is properly grounded. Do not modify the plug provided with the

product if it will not fit the outlet; have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the

plug illustrated below. A temporary adapter that looks like the adapter illustrated below may be

used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is

not available. The temporary adapter should be used only until a properly grounded outlet,

(shown below) can be installed by a qualified electrician. The green colored rigid ear-lug, or the

like, extending from the adapter, must be connected to a permanent ground such as a properly

grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal

screw.

Important Electrical Information

Grounding Instructions

Grounded Outlet

Grounding Pin Grounded Outlet Box

Metal Screw

Adapter

Tab of

Grounding

Screw

TR6.55 Treadmill

NEVER operate this treadmill without reading and completely understanding the results of

any operational change you request from the computer.

Understand that changes in speed and incline do not occur immediately. Set your desired

speed on the computer console and release the adjustment key. The computer will obey

the command gradually.

NEVER use your treadmill during an electrical storm. Surges may occur in your household

power supply that could damage treadmill components.

Use caution while participating in other activities while walking on your treadmill; such as

watching television, reading, etc. These distractions may cause you to lose balance or

stray from walking in the center of the belt, which may result in serious injury.

NEVER mount or dismount the treadmill while the belt is moving. Xterra treadmills start

with at a very low speed and it is unnecessary to straddle the belt during start up. Simply

standing on the belt during slow acceleration is proper after you have learned to operate

the unit.

ALWAYS hold on to a handrail or hand bar while making control changes (incline, speed,

etc.).

A safety tether cord is provided with this unit. It is a simple magnetic design that should be used at

all times. It is for your safety should you fall or move too far back on the tread-belt.

Pulling this safety tether cord will stop tread-belt movement.

To Use:

1. Place the magnet into position on the round portion of the console control head. Your treadmill

will not start and operate without this. Removing the magnet also secures the treadmill from

unauthorized use.

2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The

magnet has strong enough power to minimize accidental, unexpected stopping. The clip should be

attached securely to make certain it does not come off. Be familiar with its function and limitations.

The treadmill will stop, depending on speed, with a one to two step coast anytime the magnet is

pulled off the console.

Safety Tether Cord

Important Operation Instructions

TR6.55 Treadmill

Assembly Instructions for TR6.55

ASSEMBLY PACK CHECK LIST

#111 - M5 x 15mm

Phillips Head Screw (

pcs)

#95 - 5/16” x 19mm

Curved Washer (4pcs)

#94 - 5/16” x 15mm

Button Head Socket Bolt (14pcs)

#102

Safety Key (1pc)

#93 - Lubricant (1pc)

#97 - Combination M5 Allen Wrench

& Phillips Head Screw Driver (1pc)

#98 - M6 Allen Wrench (1pc)

#110 - 5/16” x 19mm

Flat Washer (10pcs)

TR6.55 Treadmill

STEP 1

Remove all the parts from the carton and lay the main base frame on a flat level surface.

STEP 2

1. Feed the long twist tie that is attached to the computer cable from the base frame (38) through

the right side upright tube (5) and slide the tube into the base frame tube. Be careful not to

pinch the wire harness.

washers (110) for the side bolts and two 5/16”curved washers (95) for the front bolts.

TR6.55 Treadmill

STEP 3

This step is easier if you have someone else helping to hold the console mounting frame while

you connect the wire. Connect the computer cable (38) to the mating connector (36) of the

console.

STEP 4

110

110 94

111

112

1. Secure the console frame to the right (5) and left (4) uprights with six 5/16”bolts (94) and 5/16”

at washers (110).Tighten using the Combination M5 Allen Wrench & Phillips Head Screw

Driver (97).

2. Install the fan assembly (112) to the underside of the console frame with the four M5 X 15mm

screws (111). Tighten using the Combination M5 Allen Wrench & Phillips Head Screw Driver (97).

3. Go back and securely tighten the eight 5/16”bolts (94) that were inserted in Step 2 with the

Combination M5 Allen Wrench & Phillips Head Screw Driver (97).

TR6.55 Treadmill

STEP 5

36 25

112-3

STEP 6

111

Connect all six connectors to the mating connectors on the back of the console. There are two

3-pin connectors that are color coded, make sure to plug them into the correct place. There are

two 2-pin connectors that can be plugged into either mating connector on the console. Secure

the console (39) to the console frame with four M5 X 15mm screws (111). Tighten using the

Combination M5 Allen Wrench & Phillips Head Screw Driver (97).

Attach the left (44) and right (43) covers to the upright base frame with four M5 X 15mm

screws (111). Tighten using the Combination M5 Allen Wrench & Phillips Head Screw Driver (97).

Inhaltsverzeichnis

Andere Xterra Tretmühle Handbücher

Xterra

Xterra TRX5500 Bedienungsanleitung

Xterra

Xterra TR150 Bedienungsanleitung

Xterra

Xterra Trail Racer TR3.0 Bedienungsanleitung

Xterra

Xterra TR 7.1 Bedienungsanleitung

Xterra

Xterra TRX3500 Bedienungsanleitung

Xterra

Xterra TR6.4 Bedienungsanleitung

Xterra

Xterra XT95-NT17 Bedienungsanleitung

Xterra

Xterra iPOWER+ Bedienungsanleitung

Xterra

Xterra TRX3500 Bedienungsanleitung

Xterra

Xterra ET94 Bedienungsanleitung

Xterra

Xterra BT280 Bedienungsanleitung

Xterra

Xterra 1644980US Bedienungsanleitung

Xterra

Xterra TL200 Bedienungsanleitung

Xterra

Xterra TR200 Bedienungsanleitung

Xterra

Xterra Trail Racer TR3.0 Bedienungsanleitung

Xterra

Xterra TR300 Bedienungsanleitung

Xterra

Xterra Trail Racer TR3.0 Bedienungsanleitung

Xterra

Xterra 1640255 Bedienungsanleitung

Xterra

Xterra 1644958US Bedienungsanleitung

Xterra

Xterra TR450 Bedienungsanleitung

Xterra

Xterra 1640755US Bedienungsanleitung

Xterra

Xterra 16004000960 Bedienungsanleitung

Xterra

Xterra TR6.8 Bedienungsanleitung

Xterra

Xterra TR150 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung