Xtool D1 Pro Bedienungsanleitung
Quick Start Guide
D1.1.6_KD010617000
Dear xTooler:
Official Website: www.xtool.com
Facebook Group: xTool D1 Official Group / Makeblock xTool Official Group
Support Center: support.xtool.com
Technical Support: support@xtool.com
Thank you for purchasing xTool D1 Pro. We are so grateful for your recogni-
tion, and sincerely hope you will enjoy this product!
xTool D1 Pro is a high-accuracy and high-power laser engraver and laser
cutter. From novice to expert, from home use to business, xTool D1 Pro is
ready to give you the best laser engraving & cutting experience.
Our mission is to make it easier for everyone to create with our machine.
We attach great importance to product experience and user suggestions.
Please let us know if you have any questions at anytime, we are always
here to help. You can join our facebook group which gathers 25000+
innovators like you, to share creative ideas and get inspired by others.
By visiting our online store, you can also find our latest accessories and
various materials to maximize the magic of xTool D1 Pro.
Thanks again for your support, and we will consistently provide quality
products and services in the future.
Sincerely,
CEO
xTool D1 Pro provides two color options. This user manual uses the golden red version to
describe how to assemble and set up your machine.
Unbox and check 1
4
26
31
35
36
38
Assemble xTool D1 Pro
Meet your xTool D1 Pro
Set up xTool D1 Pro
Download and install software
Create with example projects
Use Rotary Attachment 2
Clean the laser module 45
√
Power adapter & cable USB cable Motor cable Cable tie pack Limit switch
connection cable
TF card Key
(spare part)
Coupling Hex keyScrewdriver
Screw M4*8 Screw M4*16 Screw M4*25 Nozzle connector
components
Parts storage box
Shaft
Laser module Safety goggles Quick Start Guide/
Instructions/Bro-
chure
Material pack Riser
(included only in some packs)
Aluminum sheet A4 Rotary Attachment 2 components
(included only in some packs)
Unbox and check
Assemble xTool D1 Pro
You can visit support.xtool.com or scan the QR code to find
the tutorial video.
Tips
The screws are used to set the tension of the timing belts. Do not
fully tighten them. Otherwise, the timing belts may be damaged.
Tips
If you can't put the shaft through the
timing belt, the possible cause is that
the timing belt is set too tight. You can
adjust its tension by turning the screw.
Slide the two sliders down against the front plate.
Keep a small distance between the coupling and the motor, or
the coupling can’t rotate properly or emit noises.
Andere Handbücher für D1 Pro
3
Andere Xtool Messgerät Handbücher
