PAGE 2
Wastewater
Goulds Water Technology
APPLICATIONS
Designed for high head residential sewage applica-
tions where a gravity system is not practical. Ideal for
pressure sewage systems.
SPECIFICATIONS
Pump:
• Capacities: to 41 GPM
• Total heads: to 95' TDH
• Discharge: 11⁄4" NPT
• Temperature: 104ºF (40ºC) maximum continuous,
140ºF (60ºC) maximum intermittent
• Single mechanical seal: silicon carbide rotary/silicon
carbide stationary, 300 series stainless steel metal
parts, BUNA-N elastomers
• Fasteners: 300 series stainless steel
• Rotating cutter and cutter ring: 440 C hardened
stainless steel
Motor:
• Single phase: 2 HP, 60 Hz, 3450 RPM, 208/230 V,
capacitor start with on winding thermal protector.
No external capacitor kits required.
•Class F insulation
• Shaft: 300 series stainless steel threaded design
• Bearings: ball bearings upper and lower
Power Cord with bare lead ends:
• Use for connections in a control panel or junction
box
• Standard length 20', 14/3
STOW
• Optional lengths of 30',
50' and 100'
Power Cord with 230 V
NEMA three prong
grounding plug:
• P sufx equals a 20' long
cord with plug
• PS sufx equals a 30' long
cord with plug
• Allows direct connection
to piggyback type oat
switch
UL
®
Underwriters Laboratories
FEATURES
Design: Capable of grinding domestic sewage in
individual residential applications.
Cutter System: Anti-roping design. Two blade rotary
cutter is threaded to shaft. Stationary cutter ring is
reversible for extended service.
Impeller: Silicon bronze, semi-open, non-overloading
two-vane design with pump-out vanes for mechanical
seal protection. Balanced for smooth operation.
Casing: Cast iron, volute type for high efciency.
Adaptable for guide rail system.
Motor: Fully submerged in oil-lled chamber. High
grade turbine oil surrounds motor for more efcient
heat dissipation, permanent lubrication of bearings
and mechanical seal, and protection against outside
environment.
Motor Shaft: 300 series stainless steel, short overhang
for minimum shaft deection.
Designed for Continuous Operation: Pump ratings
are within the motor manufacturer's recommended
working limits, can be operated continuously without
damage when fully submerged.
Tested to UL 778 and CSA 22.2 108 Standards
By Canadian Standards Association
File #LR38549
Bearings: Upper and lower ball bearings for precision
positioning of parts and to carry all radial and thrust
loads.
Mechanical Seal: Hardfaced Silicon carbide for longer
life, stainless steel metal parts, BUNA-N elastomers.
Power Cable: Severe duty rated, oil and water
resistant. Epoxy seal on motor end provides
secondary moisture barrier in case of outer jacket
damage and to prevent oil wicking.
O-Ring: Assures positive sealing against contaminants
and oil leakage.
Paint: Electro-coat paint process protects all casting
surfaces.
May be used with optional guide rail. See Fittings or
Pump Removal Systems.
AGENCY LISTINGS
