XYZ Printing da Vinci 2.0 Duo Bedienungsanleitung
User Manual da Vinci 2.0 Duo
P 1
da Vinci 2.0 Duo User Manual
www.ekt2.com
Electronics Katrangi Trading
User Manual da Vinci 2.0 Duo
P 2
This manual provides detail instructions for the safety use of da Vinci 2.0 Duo 3D Printer. From the
instruction, it will show you how to use and maintain da Vinci 2.0 Duo 3D Printer properly.
If you would like to get the latest information about da Vinci 2.0 Duo 3D Printer, please refer to
XYZprinting online: http://www.xyzprinting.com
www.ekt2.com
Electronics Katrangi Trading
User Manual da Vinci 2.0 Duo
P 3
Content
Chapter 1 Important Safety Instruction .............................................................................. 4
Chapter 2 Overview ............................................................................................................6
Chapter 3 Install and Set Up ............................................................................................8
Chapter 4 Connect the Cable ...............................................................................................9
Chapter 5 Printer Functions ................................................................................................10
5-1 UTILITIES ................................................................................................................11
5-1.1 CHANGE CART.............................................................................................12
5-1.1.1 INSTALL CARTRIDGE..........................................................12
5-1.1.2 LOAD FILAMENT.......................................................................12
5-1.1.3 UNLOAD FILAMENT......................................................................14
5-1.2 HOME AXES......................................................................................................... 15
5-1.3 JOG MODE............................................................................................................16
5-1.4 BUILD SAMPLE.....................................................................................................17
5-2 SETTINGS ...............................................................................................................18
5-3 INFO.........................................................................................................................18
5-3.1 STATISTICS...........................................................................................................19
5-3.2 SYSTEM VERSION.............................................................................................. 19
5-3.3 CARTRIDGE STATS............................................................................................ 19
5-4 MONITOR MODE..................................................................................................... 20
5-5 Print Bed Adjustment..................................................................................... 21
Chapter 6 Q&A....................................................................................................................22
www.ekt2.com
Electronics Katrangi Trading
User Manual da Vinci 2.0 Duo
P 4
Chapter 1. Important Safety Instruction
Please read this manual carefully before operating the printer. The following warnings and attention
notices are a best effort attempt to cover all scenarios; unfortunately it is not possible to do so. In
the case of performing maintenance procedures that are not described in this manual the burden
of safety falls to the customer side.
For basic safety and precautions adhere to the following:
●Do not let children operate this device without adult supervision. Electric shock hazard. Moving pars can
cause serious injury.
●Do not place the printer on an unbalanced or unstable surface. Printer may fall or tumble causing harm
and/or injury. Printer may fall or tumble causing harm and/or injury.
●Do not place any objects on top of the printer. Liquids and objects that fall into the printer can lead to
printer damage or safety risks.
●Do not use flammable chemicals or alcohol wipes to clean this device.
●Do not disassemble or replace the printer cover with none XYZprinter covers.
●Do not touch heated surfaces during or after operation. Heated surfaces can cause severe burns.
●Insert and secure the power cord firmly for proper usage and to avoid potential electricity and fire dangers.
●Do not attempt to service the printer beyond the instructions specified in this document. In the case of
irrecoverable problem, contact XYZprinting service center or your sales representative.
Warning
Attention
●Please place and use the printer in a well ventilated area. The process of heating the filament will produce
a small amount of non-toxic odor. Having a well ventilated area will ensure a more comfortable
environment.
●This printer is only to be used with filament specified by XYZprinting.
●Make sure to set the power switch to the off position and remove the power cord before transporting the
device.
●Some components of the printer are moving during operation. Do not attempt to touch or change anything
inside before power off the printer.
www.ekt2.com
Electronics Katrangi Trading
User Manual da Vinci 2.0 Duo
P 5
Chapter 2 Overview
This chapter describes the unpacking and set up of the printer. Before proceeding to this chapter,
please make sure read the Chapter 1. Important Safety Instruction is acknowledged carefully.
Attention
●Retain the box and packing material. If the need arises It will be used to transport the unit.
●This device without packing material or box is wighted around 23Kg (50lb).
www.ekt2.com
Electronics Katrangi Trading
www.ekt2.com
Electronics Katrangi Trading
User Manual da Vinci 2.0 Duo
P 6
Display Panel: Information on printer status.
Extruder Module: a print module which heats the filament to molten state, and pull the melted
filament out through nozzle for printing.
Z-Axis Rod: a rod which moves the print bed vertically during printing.
Front Door: a door enclosing the working space; should only be opened during operating or
maintenance.
Print Bed: Provides a flat surface to lay the 3D model.
Cartridge Slot: a space for loading filament cartridge.
USB Port: a port for connecting USB cable.
Power Switch: a swtich for turning on/off the power of the printer.
Power Connector: a connector for connecting the power cord.
Extruder Module
Z-Axis
Print Bed
USB Port
Cartridge Slot
Remove the
packaging supports
Remove the
print bed fixing
screws and
printing module
fixers
Power Switch
Power
Connector
Front Door
Control Panel
Display Panel
GLUE STICK
．Filament Cartridge x2
．Power Cord
．USB Cable
．Decorative Plate x2
．Software CD
．User Quick Guide ．Cartridge Locker x2
．Glue Stick ．Copper Brush
．Cleaning Wire x5
．Scraper
Once the 3D printer is turned off, wait at least 3 seconds before turning it on again.
Attention
User Manual da Vinci 2.0 Duo
P 7
Chapter 3 Install and Set Up
Parts name and Functions
www.ekt2.com
Electronics Katrangi Trading
User Manual da Vinci 2.0 Duo
P 8
Chapter 4 Connect the cable
<A. USB Port / B. Power Connector>
Connect USB cable and power cord
Connect the printer power cord and USB cable to the back of the printer.
Power On the printer
Please switch the power button to “I” icon. When information is shown on the display panel, the
printer is powered on correctly.
Warning
●Make sure to set the power switch to the “off ” position before inserting the power cord.
●Make sure the power cord is properly connected. Incorrect use may cause damage to the printer.
●Make sure to remove the power cord from printer if you are storing or not using the printer for an extended
period of time.
●Make sure to avoid power strips to power the printer . Use a wall outlet.
www.ekt2.com
Electronics Katrangi Trading
User Manual da Vinci 2.0 Duo
P 9
Chapter 5 Printer Functions
Functions of Control Panel Key on the printer:
Function Description
UTILITIES
SETTINGS
INFO
MONITOR MODE
Printer adjustment / Change cartridge / Sample printing
Function settings
The firmware and printer statistical information
Monitor of extruder and print bed working temperature and printing progress
www.ekt2.com
Electronics Katrangi Trading
User Manual da Vinci 2.0 Duo
P 10
CLEAN NOZZLE
CLEAN DRIPBOX
Heat the extruder and move it to the center of the chamber for manual cleaning
Move the extruder to the center for manual dripbox cleaning
5-1 UTILITIES
Function Description
CHANGE CART
HOME AXES
JOG MODE
BUILD SAMPLE
Loads/unloads filament
Moves the extruders and print bed to default "home" location
Manually adjusts the movement of X/Y/Z Axis for printer maintenance
Prints sample build
www.ekt2.com
Electronics Katrangi Trading
Andere Handbücher für da Vinci 2.0 Duo
1
Inhaltsverzeichnis
Andere XYZ Printing 3D-Drucker Handbücher
XYZ Printing
XYZ Printing da Vinci 1.0 Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci 1.0 Pro Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci 1.0 Pro 3in1 Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci Jr. WiFi Pro Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci Pro EVO Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci 2.0 Duo Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci Color mini Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci 1.0 Bedienungsanleitung
XYZ Printing
XYZ Printing Nobel Superfine Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci nano Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci Super Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci Jr. 1.0 Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci 1.0 Pro Bedienungsanleitung
XYZ Printing
XYZ Printing Nobel 1.0A Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci Jr.1.0A Bedienungsanleitung
XYZ Printing
XYZ Printing Nobel 1.0 Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci 1.0 Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci Jr.1.0 Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci Jr 1.0 Pro Bedienungsanleitung
XYZ Printing
XYZ Printing da Vinci Jr.1.0w Bedienungsanleitung
