XYZ Printing Da Vinci Jr.1.0 Bedienungsanleitung

July

2015

da Vinci Jr.1.0

P 1HD23F1J00H1

da Vinci

Jr.1.0

Quick Guide

da Vinci Jr.1.0

da Vinci Junior 1.0 3D Printer

July

2015

da Vinci Jr.1.0

P 2HD23F1J00H1

A: Filament movement area

B: Feed module

C: Print head

D: Filament

E: Extruder

F: SD card port

(Storage format: FAT32)

G: Control and display panel

H: Front cover

• Do not place printer in humid or dusty environments such as bathrooms and high trafﬁc areas.

• Do not place the printer on a rickety surface and/or inclined position. Printer may fall down/or

tumble and it may cause serious injury.

• Please keep the front door closed during printing to avoid injury.

• Do not touch the interior of the printer while printing. As it may be hot and include moving parts.

Product Overview

Accessory Checklist

Important Maintenance Tips

Important Safety Instruction

• The maintenance tools provided should be only handled by an adult. Please keep the tools away

from children.

• The scraper is used to remove the object from the print bed when the printing has ﬁnished.

The bed tape is reusable and it can be replaced when it has worn out.

• Store the gear cleaning brush properly. This tool shall only be used to clean the speciﬁed parts of the

machine and should not be used for the cleaning of other parts to prevent damaging the machine.

USB Port

Power Switch

Power Connector

．Cleaning Brush ．Scraper

．USB Wire

．Power Cord ．Bundled ﬁlament

．Bed Tape X 3pcs ．Filament spool axle ring

．Power Adapter

．Guide tube ．Cleaning Wire x 5

．SD Card

．Feeding Path

Cleaning Wire

(Wire style shipped randomly)

July

2015

da Vinci Jr.1.0

P 3HD23F1J00H1

Remove the securing styrofoam next to the print bed.

Insert the SD card that came with the printer into

your computer or download the latest XYZware from

the ofﬁcial Website and install it on the computer.

Use the USB cable to connect the printer to PC.

Connect the power cord to the printer then turn on

the power switch.

Unpacking the Product

Note: please use the original power adapter and power cord along with the printer in order to

prevent product damage or safety hazards caused by differences in voltage speciﬁcations.

Open the box and remove

the accessories and

cushions.

Remove 2 foams at the back of the cardboard.

Remove the plastic bag

and the tapes.

Raise the paper cardboard slightly upwards so

that the paper cardboard is detached from the

styrofoam slot at the bottom.

Raise the paper cardboard slightly upwards

so that the paper cardboard is detached from

the styrofoam slot at the bottom.

123

July

2015

da Vinci Jr.1.0

P 4HD23F1J00H1

Note: Please follow these steps and ensure that the guide tube is properly installed before

starting the "LOAD FILAMENT" function. Failure to install the guide tube may disrupt ﬁlament feed.

Reminder: If you are not too sure where the feed module tube port is,

you may open the casing of the machine to see the indication label.

Ensure that the guide tube has been tightly

inserted into the port to complete the guide tube

installation process.

Direct the guide tube from the tube movement area

out of the machine and then insert the other end of

the ﬁlament tube into the feed module tube port.

Installing the Accessories

．Guide tude

Before installing the guide tube, turn off the printer

and move the extruder to the far left-end of the

X-axis. If not done otherwise, the print quality will

be affected.

After the extruder has been adjusted, insert the guide

tube into the extruder.

．X axis

July

2015

da Vinci Jr.1.0

P 5HD23F1J00H1

First retrieve ﬁlament spool to install the ﬁlament

spool axle ring.

Place the assembled ﬁlament spool (with the spool axle

rings) on the ﬁlament holder on the left side of the printer. Pull out a section of the ﬁlament and insert it into the

feed port.

Caution: Pay attention to the direction the

ﬁlament is being pulled out and ensure that the

ﬁlament spool axle is being rotated in the correct

manner.

Open the release arm and push the ﬁlament all the way

to the bottom so that the front end of the ﬁlament is

completely inserted into the feed module.

Take out and separate the ﬁlament spool

axle ring into its two components.

Install the sensor chip. Please pay special attention to

the position of the installation holes on the chip.

Insert the ﬁlament spool axle ring components

to either side of the ﬁlament spool, and use a

cruciform screwdriver to tighten and secure the

rings to the axle to complete the installation of

the ﬁlament spool axle rings.

Load Filament

CHANGE SPOOL

July

2015

da Vinci Jr.1.0

P 6HD23F1J00H1

LOAD FILAMENT

Then load ﬁlament using the control panel on the printer…

UNLOAD FILAMENT

First unload ﬁlament using the control panel on the printer…

Select "UTILITIES" > "CHANGE SPOOL" > "LOAD FILAMENT".

Select "UTILITIES" > "CHANGE SPOOL" > "UNLOAD FILAMENT".

First open the release arm and then pull out the ﬁlament

with spool axle rings. Arrange it properly for later use.

Wait for the extruder to heat up and load

ﬁlament.

Wait for the extruder to heat up and unload ﬁlament. Press "OK" to pull out ﬁlament.

3Check if the nozzle outputs ﬁlament and

press "OK" to go back to main menu.

LOAD FILAMENT

EXTRUDER HEATING

TEMPERATURE 210 ∘C

PLEASE WAIT

LOAD FILAMENT

EXTRUDER HEATING

TEMPERATURE 210 ∘C

PLEASE WAIT

UNLOADING

PLEASE WAIT

[ OK ] TO RETURN

UTILITIES

CHANGE SPOOL

HOME AXES

JOG MODE

UTILITIES

CHANGE SPOOL

HOME AXES

JOG MODE

CHANGE SPOOL

LOAD FILAMENT

UNLOAD FILAMENT

CHANGE SPOOL

LOAD FILAMENT

UNLOAD FILAMENT

CHECK FILAMENT

OUT FROM NOZZLE

[　＜　]　TO RETRY

[ OK ]　TO RETURN

DA VINCI 　Jr. 1

UTILITIES

SETTINGS

INFO

DA VINCI 　Jr. 1

BUILD FROM CARD

UTILITIES

SETTINGS

When ﬁnishing "UNLOAD FILAMENT"

Unload Filament

Note: Always implement the "UNLOAD FILAMENT" function when replacing

the cartridge in order to ensure proper removal of the ﬁlament. Cutting

ﬁlament too closely to the print head may result in residual ﬁlament

blocking and causing damage to your print head.

July

2015

da Vinci Jr.1.0

P 7HD23F1J00H1

BUILD FROM CARD

JOG MODE

HOME AXES

“HOME AXES” moves the extruder to the lower left corner.

“JOG MODE” is used to manually move the extruder and the print bed.

3 sample models are built into the printer. You may begin your ﬁrst 3D prints with the samples.

1.Select a sample to print

2.Select desired increment of travel with and

buttons, and press (or hold) or button for desired

direction to move the extruder.

To home axes:

To move the extruder:

To print a sample:

Select “YES” to proceed.

jog mode

x-axis

y-axis

z-axis

build FROM CARD

demo

DEMO

start building

yes

x-axis ok exit

－ ■ 001mM ＋

010mm

020mm

▲

2.Put the bed tape on the print bed.

3.Select "YES" to start printing

4.Remove the printed object when the printing has

finished and the print bed has descended.The bed

tape is reusable and it can be replaced when it's worn.

home axes

are you sure

YES

UTILITIES

1.Select “X-AXIS” (to move right

and left) and "Z-AXIS" (to move up and

down). Execute "Home Axes" function ﬁrst

to move "Z-AXIS". “Y-AXIS” (to move print

bed backwards and forwards).

July

2015

da Vinci Jr.1.0

P 8HD23F1J00H1

CLEAN NOZZLE

Z OFFSET (adjust the printer module)

Z OFFSET settings adjustment

The user may use the Z OFFSET function to adjust the gap between the printing nozzle and the printing bed.

Caution: This printer has already been tested and adjusted to the optimal gap between the printing nozzle and printing bed before

shipping. We recommend recording the original settings before carrying out any adjustments.

UTILITIES

Over time, carbon deposits or ﬁlament dust buildup in the nozzle may decrease its performance. It is advised to clean the nozzle

after every 25 hours of printing.

Also, if the print bed calibration shows “ERR” or if there is any residue on your prints, you may try to clean the nozzle.

To clean the nozzle:

3.Hold the cleaning wire with the

pliers, and carefully pass the wire

through the nozzle openning.

1.Select "YES" to begin. 4.Select "OK" to return.2.Wait until the extruder heats up and

moves to the front, and the screen

shows “READY FOR CLEAN”

1.The recommended distance between the nozzle and print bed(with bed tape securely fastened) is 0.3mm. This should allow

two sheets of copy paper to be drawn out smoothly but six sheets of copy paper cannot be passed.

2.Increase/decrease the value based on a scale of 0.1mm.

Increasing the value will increase the gap between the print module and print bed by 0.1mm

Decreasing the value will also decrease the gap between the print module and print bed by 0.1 mm

+ [ ^ ]

Z OFFSET 0.1 mm

─[ v ]

[OK] TO SAVE

If the cleaning cycle does not unclog the extruder, try cleaning the feeding path by following the steps below.

1.Unload filament correctly (refer to “UNLOAD FILAMENT”).

2.Move the extruder and the print bed to the home position by using the HOME AXES function.

3.Activate “UNLOAD FILAMENT” again and wait until the extruder is heat up to 150℃ . (Care should be taken during the

operation to avoid potential burn injuries.)

CLEAN NOZZLE

ARE YOU SURE ?

YES

CLEAN NOZZLE

READY FOR CLEAN

[ OK ] TO RETURN

4.Press the white button

at the back of the

extruder to release it.

5.Lightly press the spring around

the feed hole and remove the

filament guide tube (do not

disconnect the white flat cable)

7.After cleaning the feeding

path, reinstall the guide tube

to the top of the extruder

and install the extruder to the

bracket.

6.Insert the thick cleaning wire into

the feeding path all the way down and

“floss” the inside of the nozzle to pull

the residue out.

Andere Handbücher für da Vinci Jr.1.0

Inhaltsverzeichnis

Andere XYZ Printing 3D-Drucker Handbücher

XYZ Printing

XYZ Printing da Vinci Mini Series Anleitung zur Verwendung

XYZ Printing

XYZ Printing Vinvi 2.0A Duo Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci Jr. 1.0 Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci nano Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci 1.0 Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci Jr 1.0 Pro Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci Jr. 1.0 Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci 1.0 Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci Super Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci 1.0 Pro Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci 1.0 Bedienungsanleitung

XYZ Printing

XYZ Printing Nobel Superfine Bedienungsanleitung

XYZ Printing

XYZ Printing 3C10A Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci 1.0 Pro 3in1 Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci Jr. WiFi Pro Bedienungsanleitung

XYZ Printing

XYZ Printing PartPro150 xP Bedienungsanleitung

XYZ Printing

XYZ Printing 3C10A Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci Jr.1.0w Bedienungsanleitung

XYZ Printing

XYZ Printing do Vinci nono Bedienungsanleitung

XYZ Printing

XYZ Printing Nobel Superfine Bedienungsanleitung

XYZ Printing

XYZ Printing PartPro300 xT Bedienungsanleitung

XYZ Printing

XYZ Printing ds Vinci Color Bedienungsanleitung

XYZ Printing

XYZ Printing Nobel 1.0A Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci Jr.1.0w Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch

XYZ Printing da Vinci Jr.1.0 Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken