XYZ Printing Da Vinci Pro EVO Bedienungsanleitung

da Vinci Pro EVO User Manual

Important Safety Precautions (P.2)

- Safety and Regulation (P.2)

- Safety Instructions (P.2)

- Note on Power Supply (P.3)

- Safety Notice and label (P.3)

About da Vinci Pro EVO (P.4)

- Introduction (P.4)

- Specifications (P.5)

- Accessory Checklist (P.6)

- Precautions and Instructions of Maintenance Tools (P.6)

- Maintenance and Service (P.7)

Unpacking and Installation (P.7)

- Unpacking (P.7)

- Hardware Installation (P.9)

- Software Installation (P.12)

Feed Module Adjustment (P.14)

Operating The Printer (P.16)

- Main Screen Function Introduction (P.17)

- Function and Description (P.17)

- Printing (P.34)

Operating The Software (P.36)

- Software Interface (P.36)

- Connecting to the Printer (P.37)

Laser Engraver Module (Optional) (P.38)

Support Information (P.39)

Please read the product User Manual carefully before using this product.

This user manual is mainly intended for users to understand how to use the da Vinci Pro EVO 3D

printer (“Pro EVO”) correctly. In the user manual, users can learn more about the operating

tips, application skills and maintenance of the Pro EVO 3D printer.

For more information on the Pro EVO, please contact your local dealer or visit the official website

of XYZprinting : http://www.xyzprinting.com.

LIMITATION OF WARRANTY AND LIABILITY

XYZprinting is responsible for the device in its original configuration. Any changes to the

configuration of the machine must be performed or authorized by the XYZprinting technical

department. XYZprinting is not responsible for the problems and warranty dues to the use of

not original spare parts or printing materials.

Trademarks

All trademarks and registered trademarks are the properties of their respective owners.

Print History

New editions of this manual incorporate new and changed material different from previous

editions. Minor corrections and updates may be incorporated into reprints of the current edition

without releasing additional announcements or documentation regarding the updated version.

The User Manual is for user reference only. If you need to obtain the latest information, you are

welcomed to visit the XYZprinting website: www.xyzprinting.com

Important Safety Precautions

Safety and Compliance

Please read through this manual and all safety precautions carefully before using, operating,

unpacking, replacing, removing any part or maintaining this product. Please also comply with

the instructions of relevant safety.

Safety Instruction

Do not move the machine by yourself as it is heavy.

Do not place the printer on a soft or tilted surface. Otherwise, the machine will fall / flip

over and become damaged or cause personal injury.

Do not place the printer in a dusty, humid or outdoor environment.

Weak odors may be generated during the printing process. We recommend working in a

well-ventilated.

Do not leave the product or power cord to unattended children. Otherwise, personal injury

or electric shock might occur.

Do not place any liquid container on top of the product. Otherwise, overflow or spill might

go into the machine and pose the risks of danger or safety concern.

Do not wipe the printer with alcohol or flammable chemicals. Otherwise, danger might

occur.

Do not move the machine when it’s powered on.

Please use the provided power cord. Otherwise, incorrect grounding might lead to

damage.

Do not reach into the machine with your hands during operation. Otherwise, risks of

impact from moving printing parts or burn from high temperature might occur.

The machine becomes hot during operation and thus run in high temperature. Do not

touch or replace parts when they are not cooled down.

After startup, the parts in the machine will heat up or move depending on the user’s

instructions. During product operation, do not touch or block the operation of the parts.

Defect reparation must be carried out according to the contents of this instruction manual.

Where the defect cannot be repaired, please contact your printer dealer or the customer

service center.

Note on Power Supply

Do not use with damaged cord or plug. To unplug grasp the plug, not the cord. Do not

handle plug or machine with wet hands.

Do not handle plug or machine with wet hands. Turn off the power switch before

unplugging.

Do not run the machine over cord. Keep cord away from heated surfaces.

If the system is left in idle mode for an extended amount of time, turn off the main switch.

Safety Notice and label

Warning

Class I Equipment. This equipment must be earthed. The power plug must be connected to a properly wired

earth ground socket outlet. An improperly wired socket outlet could place hazardous voltages on accessible

metal parts.

Marking of hazardous moving parts

About da Vinci Pro EVO

Introduction

1. Extruder module

2. Print bed and removable metal print bed

3. 5 inch touch screen

4. USB socket/USB Port

5. USB socket/USB Port

6. USB cable port

7. Power switch

8. Power inlet

9. Feeding motor system

10. Filament holder

11. Top cover

4, 5

Specifications

Print technology

Fused Filament Fabrication( FFF )

Max. build area (WxDxH)

220 x 200 x 200 mm

Material compatibility

TPU / Nylon / Premium Metallic PLA / Carbon Fiber / PP GF30 /

Tough PLA / PETG / ABS / PLA / PC / *PC/ *Carbon PET(PET CF15)

/ *Carbon Nylon(PAHT CF15)

*Optional High Temp extruder module

Filament diameter

1.75 mm

Layer resolution

0.05 mm ~ 0.4 mm

XY positioning precision

X / Y : 0.0125 mm

Auto calibration

Yes

Filament feeding system

P-Motor gap adjustment

Offline printing

Yes（USB）

Support 3rd party material

Yes

Print head diameter

0.4 mm

User interface

5 inch touch screen

Print bed

Heated, removable metal print bed

Print bed temperature

40 ~ 110 °C

Connectivity

USB 2.0 cable, Wi-Fi dongle, USB flash drive

Printing software

XYZprint 3

Supported file formats

.stl / .3mf / .obj / .igs / .stp / .ply / .amf / .3cp / .iges / .step /

G-code

Operating systems

Microsoft Windows 10 / 11（64-bit）

macOS 10.14及以上

Product dimensions (WxDxH)

485 x 532 x 572 mm

Net weight

24 kg

Operating temperature

15 ~ 32 ℃

Storage temperature-Filament

10 ~ 40 ℃

Accessory checklist

※The company reserves the rights at any time under the specific circumstances of accessory to

improve the right of specific style and size to actual supply prevail.

Maintenance Tools

The following tools are intended for use under the guidance or guardianship of an adult

only. Do not allow children unfamiliar with the tools to have access to them in case of

danger.

Precautions and Instructions of Maintenance Tools

Regular cleaning of the print nozzle facilitates to not only extending service life of the

printer, but also improves print quality.

To prevent the incomplete flow of the filament as to affect the print quality, as may be caused by

the remaining and the stacking of the filament after the print head is operated for a longer time,

please select “Clean Nozzle” option in “Maintenance” menu of the Printer and then clean

the steel wires or that remained in the feed hole with the Nozzle in order to remove the residual

debris.

* Filament should be unloaded from the extruder module before cleaning the feeding path.

* Care should be taken during the operation to avoid potential burn injuries.

Filament scraps generated during printing may remain on the feeding motor and gear,

which will affect the printing quality and operation of the printer. In this case, please clean

the scraps.

Maintenance and Service

If an abnormal sound is heard from the Z-axis when the machine is operating, please apply

grease to protect the machine.

When the printer needs to be serviced during the term of the warranty, it is recommended

that the machine is packed with original packaging materials prior to shipment. For this

purpose, the packaging materials are better to be kept. If other packaging materials are

used instead, the printer might be damaged during printing. We reserve the right to assess

relevant service fees.

Unpacking and Installation

Unpacking

Please follow the instructions to unpack the product. Failure to follow the procedure may result

in damage to parts.

1. Open the outer box to pull it out.

2. Remove the cushions of accessories on the upper two sides and all fixing materials at the

front and rear.

3. Remove the cushions and accessories above the machine.

4. Remove the packaging bags and take out the printer, then remove all fixing tapes on the

printer and take off the top cover.

5. Open the front cover and remove the tapes and cardboard above the front of the printer and

the tape below.

6. Cut the tape binding the cushions on both sides and remove the cushions.

7. Remove the fixing cardboard above the printer.

8. Remove the tape on the fixing cushions on the left and right sides, and remove all cushions

inside the machine.

9. Take out the filament box and extruder module accessory box.

10. Please remove the two clips from both sides of the belt before using.

Hardware Installation

Print Bed Installation

Tear off the tape affixed to the backside of the Rubber Magnet (Accessory 10) and then align the

magnet with the corner of the print bed. Next, press the magnet down until it is attached to the

print bed securely.

After that, load the Removable metal print bed (Accessory 11) on the magnetic-bonded print

bed.

Extruder Module Installation

Hand Tools: L shaped torx Key(accessory 16) or T10 Torx Screwdriver.

Disconnect the power. Insert the heated flat cable and then align the extruder module with the

correct position of the 3-point screw hole. After that, tighten these 3 screws with the L-shaped

torx key (Accessory 16) respectively until the extruder module is secured in position.

Mind the pinching position (as shown in the figure) when

inserting the heating cable into the interface, and confirm the

fool-proof position, then align the two ends and insert with

even force.

Extruder Module Removement

Filament should be unloaded from the extruder module before module removement.

Loosen the screws at the three holes (loosening instead of taking down the screws, and keep the

screws on the holes), support the extruder module by hand, then press both ends of the heating

cable to pull it out.

Mind the pinching position (as shown

in the figure), and pull out the heating

cable with even force.

Guide Tube and Clear Tube Installation

Insert one end of the guide tube (accessory 8) into the feed module and secure it tightly.

Insert the clear tube (accessory 9) into another end and be sure to complete this installation, in

order to press the clear tube down to remove the guide tube in the future. (Please be sure to

complete this step to facilitate pressing down the clear tube and removing the guide tube)

Press the filament guide tube goes into the feed hole of the extruder module tightly and the

installation of the filament guide tube is duly completed.

Guide tube clips (This file is stored on USB drive) and Top cover buckle

Installation

Guide tube clips (accessory 15) is used to fix the wires and guide tube, and can stabilize when

moving of the wires and tube during printing.

Please avoid the distance position that will touch the upper cover when the printing moves.

Inhaltsverzeichnis

Andere XYZ Printing 3D-Drucker Handbücher

XYZ Printing

XYZ Printing da Vinci 1.0 Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci 1.0 Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci Jr. 1.0 Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci Jr 1.0 Pro Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci Jr.1.0 Bedienungsanleitung

XYZ Printing

XYZ Printing 3C10A Bedienungsanleitung

XYZ Printing

XYZ Printing PartPro120 xP Bedienungsanleitung

XYZ Printing

XYZ Printing PartPro200 xTCS Bedienungsanleitung

XYZ Printing

XYZ Printing Nobel 1.0 Bedienungsanleitung

XYZ Printing

XYZ Printing Da Vinci Jr. 2.0 Mix Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci Jr.1.0 Bedienungsanleitung

XYZ Printing

XYZ Printing Nobel Superfine Bedienungsanleitung

XYZ Printing

XYZ Printing PartPro300 xT Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci Color mini Bedienungsanleitung

XYZ Printing

XYZ Printing Nobel 1.0 Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci 2.0 Duo Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci Jr.1.0w Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci 1.0 Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci nano Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci 1.0 Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci 1.0 Pro Bedienungsanleitung

XYZ Printing

XYZ Printing da Vinci 1.0 Pro 3in1 Bedienungsanleitung

XYZ Printing

XYZ Printing ds Vinci Color Bedienungsanleitung

XYZ Printing

XYZ Printing Nobel Superfine Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch

XYZ Printing da Vinci Pro EVO Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken