Yamaha SPM-K1 - Mounting Kit For Speaker Bedienungsanleitung

English Français Deutsch Svenska Italiano Español Nederlands 日本語

SPM-K1

WALL MOUNT BRACKET

SUPPORT MURAL

サウンドプロジェクター壁掛け金具

Installation Manual

Manuel d’installation

Installationsanleitung

Instllationsanvisningar

Manuale d’installazione

Manual de instalación

Installatiehandleiding

取付説明書

01EN_SPM-K1_U-cv1.fm Page 1 Wednesday, January 12, 2005 4:23 PM

DIMENSIONS

ABMESSUNGEN

MATTSKISSER

DIMENSIONI

DIMENSIONES

AFMETINGEN

各部の寸法

Large wall mount bracket

Grand support mural

Große Wandhalterung

Stort väggmonteringsfäste

Staffa di installazione a muro grande

Soporte de montaje en pared grande

Grote wandbevestigingsbeugel

壁掛け金具（大）

Small wall mount bracket

Petit support mural

Kleine Wandhalterung

Litet väggmonteringsfäste

Staffa di installazione a muro piccola

Soporte de montaje en pared pequeño

Kleine wandbevestigingsbeugel

壁掛け金具（小）

Unit with bracket

Le système avec son support

Einheit mit Halterung

Ljudprojektorn med fästet

Unità con staffa

Unidad con ménsula

Toestel met de beugel

取付時の寸法

200

13 8

800

150

187.5 187.5

225 225

262.5 262.5

300 300

150

355 355

385 385

(mm)

1.3kg

25.2

129.5

M6TAP

0411134

125

110

(mm) (mm)

YSP-1

0.1kg ×2

SPM-K1

01EN_SPM-K1_U-cv1.fm Page 2 Wednesday, January 12, 2005 4:23 PM

English

SPM-K1

E-1

WALL MOUNT BRACKET

SPM-K1

Installation Manual

Thank you very much for purchasing the Wall Mount Bracket SPM-K1. Be sure to read this manual thoroughly before

using this bracket. After you have read this manual, retain it for future reference.

SAFETY INSTRUCTIONS

• Always follow the instructions set forth in this manual when installing the Sound Projector using

this bracket.

Improper or inadequate installation could cause the Sound Projector to fall, resulting in personal injury.

• The installation must be secure enough to bear the weight of the Sound Projector, the wall bracket

and other hardware indefinitely, and must also be secure enough to withstand vibrations.

Improper or inadequate installation could cause the Sound Projector to fall, resulting in personal injury.

• To ensure safety, all screws must be tightened securely.

Loose screws could cause the Sound Projector to fall, resulting in personal injury.

• Make sure to leave adequate ventilation space around the unit to allow heat generated by the

Sound Projector to dissipate.

Failure to provide adequate space around the unit could cause the Sound Projector to overheat internally, resulting in

a fire.

• Never hang from the Sound Projector or the wall bracket.

Hanging from the Sound Projector or the wall bracket could cause the Sound Projector or the wall bracket to fall,

resulting in personal injury.

• Once the Sound Projector is installed, safety checks should be conducted on a regular basis.

If the Sound Projector is used over an extended period of time, screws can become loose and the installation can

become weaker due to the passage of time, vibrations, etc.

When installing the Sound Projector using this bracket, all installation work must be performed by

a qualified contractor or dealer personnel. The customer must never attempt to perform this

installation work. Improper or inadequate installation could cause the Sound Projector to fall,

resulting in personal injury.

01EN_SPM-K1_U.book Page 1 Friday, March 25, 2005 1:51 PM

ACCESSORIES

E-2

Check that all of the following parts are included.

Prepare more than six sets of commercially available screws (M5-M6, 25 mm or more in length) and

washers in addition to the accessories shown above.

ACCESSORIES

Small wall mount brackets (2) Projector mounting screws

(M6 x 16) (6)

Safety wires (2) M4 x 10 Screws (2)

Length 300mm

Large wall mount bracket (1)

01EN_SPM-K1_U.book Page 2 Friday, March 25, 2005 1:51 PM

English

INSTALLATION PROCEDURE

E-3

Make sure to leave adequate ventilation space around the unit and follow the instructions below.

In order to secure the unit to the wall, you will need to attach the bracket to the wall first in a manner befitting the

structure and quality of the wall.

Choose a location where the wall can bear the weight of the whole unit.

Before installing the bracket, make sure of the size (see “DIMENSIONS” on the first page of this manual).

Choose a secure wall or beam to fasten the screws. Do not install them into walls mafe of weak

material that can easily come off, such as mortar or plywood wall panels. Loose screws could cause

the projector to fall, resulting in personal injury.

Choose a method (A or B) when attaching the safety wire. When you choose the method A, attach the safety wire using

M4 screws provided. (Some of the projectors have no screw hole depending on the date of manufacture.)

When attaching to the projector. When attaching to the small wall mount

bracket.

If you tighten the screws on the slant, the screw threads in the projector might be broken. Be careful when

using electric tools.

INSTALLATION PROCEDURE

Attach the large wall mount bracket to the wall.

Attach the safety wire.

Washer

(commercially

available)

5~6mm Tapping Screw (commercially available)

In order to secure the unit to the wall, attach four (or more) tapping

screws using the outside of the holes in the wall mount bracket.

Installing into a dry

wall.

Installing directly

into a wall, etc..

25mm or more 25mm or more

Beam, etc. Dry wall

Safety wire

M4 screw

provided

Attach the

safety wires

to the left and

right sides of

the projector.

Rear panel of

the projector

A B

Installation example

Slip one end

through the loop at

the other end

Slip the safety

wire through a

hole in the

bracket

Repeat the same

procedure for the

other bracket.

01EN_SPM-K1_U.book Page 3 Friday, March 25, 2005 1:51 PM

INSTALLATION PROCEDURE

E-4

Use four of the projector mounting screws (M6 x 16) provided to securely attach the small wall mount brackets (2) to the

rear left and right sides of the Sound Projector.

Fit the mounting guide hooks of the small wall mount brackets attached to the Sound Projector into the holes on the left

and right sides of the large wall mount bracket, then slide the unit to the right.

Hold the projector tight with the both hands when attaching / removing the projector to / from the wall.

Holding the projector loose could cause the projector to fall, resulting in personal injury.

Attach the small wall mount brackets to the Sound Projector.

Mount the projector on the wall.

Slide the unit to the

right.

Fit the hook into the

hole.

Rear View

Projector mounting

screws (M6 x 16)

Safety wire (Attached

by the method A)

Attach the brackets to the

rear left and right sides of

the Sound Projector.

Safety wire (Attached

by the method B)

01EN_SPM-K1_U.book Page 4 Friday, March 25, 2005 1:51 PM

INSTALLATION PROCEDURE

E-5

English

Align the holes on the large wall mount bracket with the holes on the bottom of the small wall mount brackets, and then

use two of the projector mounting screws (M6 x 16) provided to secure the unit.

Pass the screws (commercially available) through the loops of the safety wires, then tighten the screws to secure the

safety wires to the wall.

Make sure that the screws are strong enough to bear the weight of the projector and the brackets in case they fall.

Attach the safety wires tight.

Secure the unit.

Bottom View

Sound Projector

Projector mounting screws

(M6 x 16)

Attach the safety wires to the wall.

Secure the safety wire to

the wall.

Washer

(commercially available)

Secure the safety wire

to the wall.

Screw

(commercially available)

01EN_SPM-K1_U.book Page 5 Friday, March 25, 2005 1:51 PM

01EN_SPM-K1_U.book Page 6 Friday, March 25, 2005 1:51 PM

SPM-K1

F-1

Français

Support mural pour système acoustique

SPM-K1

Manuel d’installation

Nous vous remercions d’avoir porté votre choix sur le support mural pour système acoustique SPM-K1. Veuillez prendre

soin de lire attentivement ce manuel avant d’installer ce support. Conservez-le pour référence ultérieure.

INSTRUCTIONS DE SÉCURITÉ

• Respectez les instructions que contient ce manuel et qui concernent l’installation du système

acoustique au moyen de ce support mural.

Une erreur d’installation peut provoquer la chute du système, entraînant des blessures.

• L’installation doit être en mesure de résister, sans limite de durée, au poids du système acoustique,

du support mural et de la quincaillerie; elle doit également s’accommoder, le cas échéant, des

vibrations.

Une erreur d’installation peut provoquer la chute du système, entraînant des blessures.

• Pour garantir la sécurité, toutes les vis doivent être soigneusement serrées.

Un défaut de serrage peut provoquer la chute du système, entraînant des blessures.

• Veillez à ménager un espace suffisant autour du système pour que la chaleur qu’il dégage puisse

se dissiper.

Faute de ménager un espace suffisant autour du système, il pourrait surchauffer, ce qui est susceptible de provoquer un

incendie.

• Ne vous suspendez pas au système, ni au support mural.

En vous suspendant au système ou au support, vous pouvez provoquer la chute du système ou du support, entraînant

des blessures.

• Après installation du système, des vérifications de sécurité doivent être effectuées

périodiquement.

Lorsque le système est utilisé pendant une période prolongée, les vis peuvent se desserrer, en raison de vibrations,

etc., rendant l’installation moins sûre.

L’installation du système acoustique à l’aide de ce support doit être réalisé par un ouvrier compétent

ou un représentant du revendeur. En aucun cas, vous ne devez tenter d’effectuer l’installation par

vous-même. Une erreur d’installation peut provoquer la chute du système, entraînant des blessures.

01FR_SPM-K1_U.book Page 1 Friday, March 25, 2005 3:15 PM

ACCESSOIRES

F-2

Assurez-vous que les pièces suivantes font partie de la fourniture.

Préparez plus de six jeux de vis en vente dans le commerce (M5-M6, 25 mm ou plus de longueur) et de

rondelles en plus des accessoires indiqués ci-dessus.

ACCESSOIRES

Petits supports muraux (2) Vis de fixation du système acoustique

(M6 x 16) (6)

Câbles de sécurité (2) M4 x 10 Vis (2)

Longueur 300mm

Grands supports muraux (1)

01FR_SPM-K1_U.book Page 2 Friday, March 25, 2005 3:15 PM

Andere Handbücher für SPM-K1 - Mounting Kit For Speaker

Inhaltsverzeichnis

Sprachen:

Andere Yamaha Rack & Stand Handbücher

Yamaha

Yamaha HS650 Bedienungsanleitung

Yamaha

Yamaha L-85S Bedienungsanleitung

Yamaha

Yamaha L-120 Installationsanleitung

Yamaha

Yamaha L-7 Installationsanleitung

Yamaha

Yamaha YRS-1500 Bedienungsanleitung

Yamaha

Yamaha L- 2 L Bedienungsanleitung

Yamaha

Yamaha SPS-HF101 Handbuch

Yamaha

Yamaha L-6 Bedienungsanleitung

Yamaha

Yamaha Stand for Silent Bass BST1 Bedienungsanleitung

Yamaha

Yamaha SWX3220-16MT Bedienungsanleitung

Yamaha

Yamaha DTX RS10-HXR Bedienungsanleitung

Yamaha

Yamaha HEXRACK Drum Rack Mount System HXR2L Bedienungsanleitung

Yamaha

Yamaha PDS-342 Bedienungsanleitung

Yamaha

Yamaha YRS-2000 Bedienungsanleitung

Yamaha

Yamaha LP-3 Bedienungsanleitung

Yamaha

Yamaha PMT-H35 Bedienungsanleitung

Yamaha

Yamaha BS-9000 Series Bedienungsanleitung

Yamaha

Yamaha LG-800 Bedienungsanleitung

Yamaha

Yamaha CSAT926A Handbuch

Yamaha

Yamaha RS-80 Bedienungsanleitung

Yamaha

Yamaha SPM-K30 Bedienungsanleitung

Yamaha

Yamaha TH904A Handbuch

Yamaha

Yamaha LG-8 Bedienungsanleitung

Yamaha

Yamaha LW-16 Installationsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung