Yamaha RX-V2067 Gebrauchs- und Pflegehandbuch

Firmware Update Procedure for RX-V2067

Page.1 of 6

February, 2011

Subject: RX-V2067 Firmware Update ver. 3.15

Yamaha is pleased to offer this firmware update to ensure the best possible

performance for your Yamaha RX-V2067 AV Receiver.

This firmware improves contents playback stability

The following pages contain the firmware update instructions for RX-V2067. You can

easily update the latest firmware through the Internet or by using a USB thumb drive.

In order to properly execute the update, read all instructions carefully.

CHECK THE UNIT’S FIRMWARE VERSION PRIOR TO THIS UPDATE

On the remote control, press the ON SCREEN button.

Select “Information” > “System”. Your current firmware version is displayed on TV.

If your firmware version is 3.15 or higher, the AV receiver is already up-to-date.

If not, choose from the following 2 methods to update to the latest firmware.

9Click here if your AV receiver is connected to the Internet.

9Click here if your AV receiver is NOT connected to the Internet.

(In this case, a USB thumb drive is required)

In case of error, see the troubleshooting section on the last page for recovery

method.

< IMPORTANT NOTICE >

Do not attempt to update your Yamaha receiver using any other data file except those provided

directly from the Yamaha website or through your network connection.

Follow the instructions carefully and do not attempt any other procedures not specified in the

instructions provided by Yamaha.

Improperly updated products may cause improper operation, and any parts or service required

to restore proper operation will not be covered under the Yamaha Limited Warranty.

Firmware Update Procedure for RX-V2067

Page.2 of 6

Firmware Update Through Internet

STEP 1 Power off the receiver (Standby mode).

STEP 2 Enter the ADVANCED SETUP mode

While pressing the STRAIGHT button, press the MAIN ZONE ON/OFF

button and keep STRAIGHT button pressed until “ADVANCED

SETUP” appears on the front panel display.

(Note: “ADVANCED SETUP” is displayed only for a few seconds)

STEP 3 Select “FIRM UPDATE” from the menu

Press the PROGRAM button until “FIRM UPDATE USB” is displayed.

Then, press STRAIGHT button until “NETWORK” is displayed.

Requirement:

-Internet connection

Your receiver is connected to the Internet if you can receive Internet

radio stations. (See owner’s manual for details)

MAIN ZONE

STRAIGHT

PROGRAM

Firmware Update Procedure for RX-V2067

Page.3 of 6

STEP 4 Start firmware update

Press INFO button to start the update.

(Update process may take up to 15 minutes)

If “UPDATE UNAVAIL” appears, this means your receiver is already

up-to-date. In this case, power off to exit from Advanced Setup.

Your AV receiver is ready for normal use.

Firmware update in progress

Caution!

DO NOT interrupt power during the update.

In case the power is accidentally cut off resulting in a condition where

you can’t recover normal operation, refer to the troubleshooting

method CASE#2 on the last page.

When completed, “UPDATE SUCCESS”appears on the display

Turn off the power of the receiver by pressing the MAIN ZONE button.

STEP 5 Check the updated firmware version

Power on the AV receiver and press the ON SCREEN button on the

remote control. Select “Information” > “System”.

If your firmware version is “3.15”, the AV receiver is up-to-date.

Congratulations!

You have completed the firmware update. Your AV receiver is ready

for normal use.

INFO

MAIN ZONE

Firmware Update Procedure for RX-V2067

Page.4 of 6

Firmware Update by USB

STEP 1 Prepare USB thumb drive for the update

Download the firmware, unzip and copy “RXV2067-xxxx.bin” into the

root directory of the USB thumb drive.

STEP 2 Power off the receiver (Standby mode).

STEP 3 Insert the USB thumb drive

USB port is located at the lower left corner of the front panel.

STEP 4 Enter the ADVANCED SETUP mode

While pressing the STRAIGHT button, press the MAIN ZONE ON/OFF

button and keep STRAIGHT button pressed until “ADVANCED

SETUP” appears on the front panel display.

STEP 5 Select firmware update from the menu

Press the PROGRAM button until “FIRM UPDATE USB” is displayed.

Drag & Drop the file into

USB thumb drive.

Requirements:

-USB thumb drive, with enough free space to store over 25MB.

(File system with FAT16 or FAT32 format)

- Firmware file provided by YAMAHA,”RXV2067-xxxx.bin”.

MAIN ZONE

STRAIGHT

USB Port PROGRAM

Firmware Update Procedure for RX-V2067

Page.5 of 6

STEP 6 Start firmware update

Press INFO button to start the update.

(Update process may take up to 15 minutes)

Firmware update in progress

Caution!

DO NOT interrupt power during the update.

In case the power is accidentally cut off resulting in a condition where

you can’t recover normal operation, refer to the troubleshooting

method CASE#2 on the last page.

When completed, “UPDATE SUCCESS”appears on the display

Turn off the power of the receiver by pressing MAIN ZONE button.

Remove USB thumb drive.

STEP 6 Check the updated firmware version

Power on the AV receiver and press the ON SCREEN button on the

remote control. Select “Information” > “System”.

If the firmware version is “3.15”, the AV receiver is up-to-date.

Congratulations!

You have completed the firmware update. Your AV receiver is ready

for normal use.

STRAIGHT INFO

MAIN ZONE

Firmware Update Procedure for RX-V2067

Page.6 of 6

Troubleshooting

Case #1: “UPDATE FAIL” appeared during the update.

Cause: For some reason, the receiver can’t read the firmware data.

For your solution, check the following;

[Update through Internet]

9Check Internet connection.

Your Internet connection is working by playing an Internet radio station.

(See owner’s manual for details)

[Update by USB thumb drive]

9USB thumb drive is connected properly to the receiver.

9USB thumb drive is not password protected.

(AV receiver cannot read data from a security protected USB thumb drive)

9Make sure the USB thumb drive is inserted before the receiver is

powered on for the update.

9The firmware data, RX-V2067-xxxx.bin is stored in the root directory of

the USB thumb drive.

9There is no other data except the firmware data in the USB thumb drive.

9No folders are created in the USB thumb drive.

Else, retry the update by USB using another USB thumb drive.

Case #2: Firmware update doesn’t start for other reasons.

Receiver doesn’t power up after the update.

Or, “ERROR” appeared when confirming the firmware version.

Recovery method using USB method

1. Unplug the AC power cable from wall outlet.

2. Insert the USB thumb drive into the USB port located on the front panel.

3. Press and hold the PURE DIRECT button and keep it pressed while you plug the

AC power cable back into the wall outlet again. “USB UPDATE” will appear on

the front display. Then, release the PURE DIRECT button.

4. The update will start automatically.

5. When “UPDATE SUCCESS” appears on the display, firmware update is

completed. Power off the receiver and remove the USB thumb drive.

6. Confirm updated firmware version.

PURE DIRECT

USB Port

Andere Handbücher für RX-V2067

Inhaltsverzeichnis

Andere Yamaha Empfänger Handbücher

Yamaha

Yamaha R-S202BL Bedienungsanleitung

Yamaha

Yamaha AVENTAGE RX-A550 Bedienungsanleitung

Yamaha

Yamaha RX-V359 Bedienungsanleitung

Yamaha

Yamaha HTR-6230 Bedienungsanleitung

Yamaha

Yamaha CinemaDSP digital RX-Z1 Bedienungsanleitung

Yamaha

Yamaha R S300 Bedienungsanleitung

Yamaha

Yamaha RX-V465 Bedienungsanleitung

Yamaha

Yamaha RX V663 - AV Receiver Bedienungsanleitung

Yamaha

Yamaha RX-V640RDS Bedienungsanleitung

Yamaha

Yamaha RX-V730 Bedienungsanleitung

Yamaha

Yamaha RXV765 - RX AV Receiver Bedienungsanleitung

Yamaha

Yamaha RX-N600 Bedienungsanleitung

Yamaha

Yamaha RX-V692 Bedienungsanleitung

Yamaha

Yamaha RX-V681 Bedienungsanleitung

Yamaha

Yamaha RX-V361 Bedienungsanleitung

Yamaha

Yamaha RX-V1079 Bedienungsanleitung

Yamaha

Yamaha RX-V3200 Bedienungsanleitung

Yamaha

Yamaha RX-V457 Bedienungsanleitung

Yamaha

Yamaha RX-V2092 Bedienungsanleitung

Yamaha

Yamaha RX-A710 Kurzanleitung

Yamaha

Yamaha RX-V1500 Bedienungsanleitung

Yamaha

Yamaha RX-V373 Bedienungsanleitung

Yamaha

Yamaha HTR 6250 - AV Receiver Bedienungsanleitung

Yamaha

Yamaha R-30 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung