Yamaha MOTIF XF Bedienungsanleitung

Voice Editor Essential Owner’s Manual

iPad

iMX-1

MIDI OUT MIDI IN

MIDI IN MIDI OUT

Voice Editor Essential MOTIF XF, S90XS/S70XS,

MOX6/MOX8, MOTIF XS,

MOTIF-RACK XS

• Copying of the commercially available music sequence data and/or digital audio files is strictly

prohibited except for your personal use.

• The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly

forbidden without the written consent of the manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software and

documentation and cannot be held responsible for the results of the use of this manual and the

software.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may

appear somewhat different from the screens which appear on your devicer.

• Apple, iPad are trademarks of Apple Inc., registered in the U.S. and other countries.

• The company names and product names in this Owner’s Manual are the trademarks or registered

trademarks of their respective companies.

For information about the MIDI settings of the MOTIF XF, S90XS/S70XS, MOX6/MOX8, and MOTIF XS, MOTIF-RACK XS, refer to the respective manuals.

What is Voice Editor Essential?

This application lets you edit the ARP/FADER/EFFECT/MEQ parameters in the Voice mode of the MOTIF XF, S90XS/S70XS, MOX6/MOX8, MOTIF XS, MOTIF-RACK XS from

your iPad. Select a Performance on the instrument, edit the parameters of the selected Voice on the iPad, then store the edited parameters on the instrument.

The instructions in this manual use the MOTIF XF as an example.

Depending on your particular musical instrument, there may not be equivalent displays or buttons.

Utility window

For setting the

parameters

common to all the

displays

ARP/KBD CONTROL display

FADER CONTROL display

EFFECT display

EQ display

Chorus display

Reverb display

Insertion A display

Insertion B display

Vocoder display*

XY CONTROL display

Lets you control the specified

parameter change and MIDI Control

Change messages simultaneously by

dragging in the XY Pad area.

By using MIDI cables and a Yamaha i-MX1, connect the

instrument to an iPad.

The MOTIF XF can be connected via wireless Network

MIDI. For details about wireless MIDI connectivity,

refer to the “New Functions in MOTIF XF Version 1.20”

Manual.

NOTE

• Before editing, enter the Voice mode.

• After editing, store the edited Voice.

Voice Editor Essential Owner’s Manual 2

Title bar and Utility window

This window lets you set the parameters common to all the displays. Each lamp flashes according to the MIDI in/out

messages.

Tapping this opens or closes the Utility window.

Set this to the same number as that of the instrument.

Selects the connected instrument.

When set to on, tapping [RECEIVE] calls up a

confirmation message.

Tapping this calls up the Owner’s Manual.

Tapping here initializes all the settings.

Determines the connection method between the iPad

and MIDI instrument.

cable: Should be selected when connected via the

i-MX1.

wireless: Should be selected when connected via

wireless Network MIDI.

NOTE

When set to “wireless,” make the Wi-Fi setup in Settings > Wi-Fi in

your iPad.

Determines the knob behavior.

rotary: Dragging around the knob will rotate it in the

same direction.

linear: Dragging vertically upward from the knob

rotates the knob clockwise, and dragging downward

rotates counter-clockwise.

Determines the Fader behavior.

jump: The Fader jumps to any tapped location in

the Fader area.

catch: The Fader will be “caught” as you drag on it.

Title bar

Sets the MIDI Transmit Channel.

Selects the MIDI port of the instrument in case of

wireless connection.

When set to on, selecting a Template* transmits the

corresponding settings via MIDI.

Assigns the MIDI Control Change numbers to each

controller.

Utility window

*What is a Template?

Each of the Templates includes the settings of all the

displays, meaning that you can call up all the Effect

settings just by selecting the desired Template. Each

of the Templates can be renamed, called up and

initialized.

Voice Editor Essential Owner’s Manual 3

1 Tapping [RECEIVE] starts reception of the settings from the instrument.

Tapping [TRANSMIT] starts transmission of the current settings to the

instrument.

2 Changes the Arpeggio type of the current Part. This is equivalent to the [SF1] –

[SF5] buttons.

3 To edit the Normal Voice, tap [VOICE]. To edit the Drum Voice, tap [DRUM].

4 Calls up the Voice list. Tapping the desired voice in the list executes Program

Change.

5 Tapping here alternately calls up the XY CONTROL display, ARP/KBD

CONTROL display, FADER CONTROL display, EFFECT display and EQ

display.

6 Adjust the volume by operating the knob, or by tapping the volume value to

call up the slider for adjusting the volume.

7 Indicates the Arpeggio tempo. To change the tempo, tap the Tempo value to

call up the slider then operate the slider, or tap [TAP] three times at the desired

tempo.

8 Template Name

Selecting a Template calls up all the settings of all the displays. Tapping [+]/

[-] changes the Template in single steps. To change the Template, tap the

Template Name to call up the Template list, then tap the desired Template.

Common display area

The displays upper part of XY CONTROL, ARP/KBD CONTROL, FADER CONTROL, EFFECT, EQ are the same.

3 4

Template List

Closes the list.

Calls up the Rename window with on-screen

keyboard.

Voice Editor Essential Owner’s Manual 4

Voice List

As shown below, the Voice List features two indication types: Bank order and Category order. Note that User Voices are not shown in the Voice List by Category.

Voice List with the Bank order Voice List with the Voice Category order

BANK and CATEGORY tabs

Selects the indication type of the Voice List

from two types: Bank order or Category

order. When a User Voice is selected, the

CATEGORY tab is not available.

Tapping [DONE] will actually assign the

selected Voice to the current Part, then

close the List. Tapping [CANCEL] will abort

selection then close the List.

Tap the desired Bank to call up the

corresponding Voice List, then tap the desired

Voice name.

Tap the desired Main Category and Sub Category

to call up the corresponding Voice List, then tap the

desired Voice name.

Dragging upward or

downward will scroll

through the Voices.

Voice Editor Essential Owner’s Manual 5

XY CONTROL display

The Pad area on this display lets you simultaneously control the five parameters specified for CONTROL 1 – 5. This means that you can freely change the sound in real time

during keyboard performance by controlling the Pad area.

Sets how the Control Parameter Value is

determined.

X: The horizontal value of the ball position

will be transmitted as the parameter value.

Y: The vertical value of the ball position will

be transmitted as the parameter value.

Sets the Control Parameter.

Tap [+]/[-], or tap the Parameter name

between [-] and [+] to call up the list,

then tap the desired parameter.

Pad Resets the ball position

to the center of the Pad.

Ball

Indicates the current

position of your control.

Sets the sensitivity of the ball in

the Pad area.

Move the slider rightward to raise

the sensitivity.

Dragging upward or

downward will scroll

through the parameters.

Parameter List

Voice Editor Essential Owner’s Manual 6

+63

-64

-64 ±0

127

127 0

Ball position and Parameter value

Moving the ball transmits the values of the parameters specified for CONTROL 1 – 5 from your iPad to the instrument. As shown below, two different value ranges are

available.

Parameter Name Descriptions

AEG Attack

Controls the corresponding Common parameter.

AEG Decay

AEG Sustain

AEG Release

FEG Attack

FEG Decay

FEG Release

FEG Depth

Cutoff

Resonance

Pan

Assign 1 Controls the parameter set to Assign 1 in the Utility window.

Assign 2 Controls the parameter set to Assign 2 in the Utility window.

Parameter Name Descriptions

Volume

Controls the corresponding Common parameter.Reverb Send

Chorus Send

Foot Controller 1 Controls the parameter set to Foot Controller 1 in the Utility

window.

Foot Controller 2 Controls the parameter set to Foot Controller 2 in the Utility

window.

A.Function 1 Controls the parameter set to A.Function 1 in the Utility window.

A.Function 2 Controls the parameter set to A.Function 2 in the Utility window.

Breath Controller Controls the parameter set to Breath Controller in the Utility

window.

For details about Parameter Change, refer to the respective manuals of the instruments.

When the value range is -64 – +64: When the value range is 0 – 127:

Voice Editor Essential Owner’s Manual 7

ARP/KBD CONTROL display

Turns on/off ARP Common Switch

Turns on/off ARP Hold. The blue color

indicates the on status while the gray

color indicates the off status.

Sets ARP Hold to Sync Off. The blue

color indicates the Sync Off status

while the gray color indicates a different

status.

Determines the Transpose.

Tapping [-]/[+] changes the value

in single steps. Tapping the value

between [-] and [+] calls up the

slider which lets you set the value.

Determines the Octave.

Tapping [-]/[+] changes the value

in single steps. Tapping the value

between [-] and [+] calls up the

slider which lets you set the value.

Main Category, Sub Category,

Arpeggio Type

Tapping the [-]/[+] of Category

changes the Arpeggio Type to the first

one of the new . Tapping the [-]/[+] of

TYPE changes the Arpeggio Type in

single steps. Tapping the indications

between [-] and [+] calls up the

Arpeggio Type List.

Indicates the Arpeggio Type Name.

Tapping here calls up the Arpeggio

Type List.

Selects the Arpeggio Type Bank

form “Pre” or “User.” The selected

Bank lamp lights.

Arpeggio Type List

Voice Editor Essential Owner’s Manual 8

FADER CONTROL display

The Faders on this display lets you control the parameters of the instrument.

Parameter assigned to each

corresponding Fader.

Tapping the Parameter value calls

up the slider which lets you set the

value.

Faders Turns on/off Portamento Switch.

Selects monophonic or polyphonic.

Adjust the Portamento Time by

operating the Fader, or by tapping the

value to call up the slider for adjusting

the time value.

Voice Editor Essential Owner’s Manual 9

EFFECT display

Tapping here calls up the Insertion A

display or Insertion B display.

NOTE

If you want to apply the Insertion Effect to the

Drum Keys, set the Insertion Effect Output

parameter to “ins A” or “ins B.” Determines the routing for Insertion

Effects A and B. When VOCODER is

selected, Insertion Effects A and B are

unified, then used as the Vocoder.

NOTE

When “VOCODER” is selected, set Output

Select to “Ins L” in the instrument.

When VOICE is selected, this indicates

which Insertion Effect (A or B) is used

for processing each Element.

When DRUM is selected, this indicates

just “Drum Keys.”

Tapping here calls up

the CHORUS display.

Tapping here calls up

the REVERB display.

To adjust each value, drag around the

knob or tap the value to call up the

slider then operate the slider.

Voice Editor Essential Owner’s Manual 10

Reverb/Chorus/Insertion A/Insertion B/Vocoder display

From these displays, you can make the Effect settings for the Voice currently selected on the instrument. This section covers the operations on these displays having the

same design

Tapping here returns the screen to the EFFECT display.

Effect List

To select an Effect Type:

Tap [+]/[-] in this area. Or tap the indicators in this area to call up the Effect

list, tap the desired Category, tap the desired Type, then tap the desired

Preset setting. After selecting, tap [Done] to close the Effect list.

To edit the Effect parameter:

Drag the slider of the desired parameter, or tap [+]/[-].

Dragging upward or downward will scroll through the parameters.

Andere Handbücher für MOTIF XF

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Yamaha Software Handbücher

Yamaha

Yamaha mLAN Driver Bedienungsanleitung

Yamaha

Yamaha M7CL StageMix V1.5 Bedienungsanleitung

Yamaha

Yamaha DM 2000 Version 2 Bedienungsanleitung

Yamaha

Yamaha DME-N Bedienungsanleitung

Yamaha

Yamaha disklavier MX-100A Bedienungsanleitung

Yamaha

Yamaha mLAN Driver Bedienungsanleitung

Yamaha

Yamaha VL Bedienungsanleitung

Yamaha

Yamaha SPX2000 Editor Bedienungsanleitung

Yamaha

Yamaha M7CL StageMix V1.5 Bedienungsanleitung

Yamaha

Yamaha CL1 Bedienungsanleitung

Yamaha

Yamaha EZ-220 Page Turner Bedienungsanleitung

Yamaha

Yamaha CL3 Bedienungsanleitung

Yamaha

Yamaha HUB Bedienungsanleitung

Yamaha

Yamaha TOOLS for TYROS Bedienungsanleitung

Yamaha

Yamaha File Utility Bedienungsanleitung

Yamaha

Yamaha Studio Manager v.2 Bedienungsanleitung

Yamaha

Yamaha PM1D Manager V2 Installationsanleitung

Yamaha

Yamaha Sound Edge Bedienungsanleitung

Yamaha

Yamaha DM 1000 Bedienungsanleitung

Yamaha

Yamaha QY70 Bedienungsanleitung

Yamaha

Yamaha Extension Bedienungsanleitung

Yamaha

Yamaha CS6R Bedienungsanleitung

Yamaha

Yamaha mLAN Driver Bedienungsanleitung

Yamaha

Yamaha Arp Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung