Yamaha Dante Accelerator Montageanleitung

Dante Accelerator Firmware Update Guide

Thank you for choosing a Yamaha product. This guide explains how to update the Dante Accelerator

firmware.

Precautions (Please be sure to read this section first!)

The user assumes full responsibility for the update.

Update the firmware components one unit at a time.

Please note that the device may be damaged if you fail to follow these instructions properly, or

disconnect the cable while the update is in progress.

If the update fails, and the device still does not operate correctly even after you execute the update

again, please contact your Yamaha dealer.

Yamaha Corporation owns exclusive copyrights for the update guide.

Audinate owns exclusive copyrights for the Dante firmware and its update program.

It is prohibited to duplicate or modify the firmware, software or guides, in part or in their entirety, without

permission from the copyright owner.

The screen shots in this guide are for use with this update procedure only and may be different from the

actual screen shots.

Dante is a registered trademark of Audinate.

Windows is a registered trademark of Microsoft ® Corporation in the United States and other countries.

Apple, Mac and Macintosh are trademarks of Apple Inc. registered in the U.S. and other countries.

The company names and product names in this document are the trademarks or registered trademarks

of their respective companies.

Update procedure sequence

Preparing for the update

Checking the product version number

Installing the Dante Firmware Update Manager

Connecting the computer and Dante Accelerator

Computer TCP/IP setting

Updating the firmware

Checking the product version number

Preparing for the update

You will need the following items ready to execute the update procedure.

A computer connected to Dante Accelerator and fully operable

An Ethernet cable (CAT7 straight cable)

Firmware

Download then extract the latest firmware from the following URL.

http://www.yamahaproaudio.com/

Checking the product version number

You can check the current Dante Accelerator product version number from the Dante Controller.

Installing the Dante Firmware Update Manager

Before you update the firmware, you will need to install the Dante Firmware Update Manager.

Double-click the Dante Firmware Update Manager installer "DanteFirmwareUpdateManager-x.x.x.exe"

(Windows) or "DanteFirmwareUpdateManaager_x-x-x.dmg" (Mac) downloaded in “Preparing for the

update” and follow the on-screen instructions to install the firmware. The letters x.x.x or x-x-x represent the

version number of the Dante Firmware Update Manager.

NOTE

When installing the Dante Firmware Update Manager, temporarily disable any running anti-virus

software.

If any warning messages, such as those related to "User Account Control" or "Windows Security,"

appear during the procedure, follow the on-screen instructions to continue.

In the middle of installation of the Dante Firmware Update Manager, you may be prompted to install

Bonjour. In such case, download the Bonjour installer from the URL presented by the installer and

install it.

You may be prompted to restart the computer after the installation is complete. Before proceeding with

the update, restart the computer.

Connecting the computer and Dante Accelerator

Connect the Ethernet port on the computer to the primary port on Dante Accelerator by using an Ethernet

cable (CAT7 straight cable).

NOTE

If the computer has multiple Ethernet ports, no devices should be connected to Ethernet ports which are

not connected to the Dante Accelerator.

Computer TCP/IP setting

Follow the steps below to configure the computer TCP/IP settings.

Windows

NOTE

If any warning messages, such as those related to "User Account Control" or "Windows Security," appear

during the procedure, follow the on-screen instructions to continue.

1. Open the Control Panel on Windows, then click or double-click "Network and Sharing Center"

or "View network status and tasks."

The "Network and Sharing Center" will be displayed.

2. Click "Manage network connection" or "Change Adapter settings" from the “Tasks” list located

in the left side of “Network and Sharing Center” window, then double-click "Local Area

Connection" or "Ethernet."

The "Local Area Connection properties" or "Ethernet properties" dialog box will be displayed.

3. Select "Internet Protocol Version 4 (TCP/IPv4)", then click "Properties."

The "Internet Protocol Version 4 (TCP/IPv4) Protocol" dialog box will be displayed.

4. Confirm that "Obtain an IP address automatically" is selected.

5. Click "OK."

Mac

1. Click the "System Preferences" icon on Dock.

The “System Preferences” window appears.

2. Click the "Network" icon.

The “Network” window appears.

3. Click "Ethernet."

The Ethernet settings window appears.

NOTE

If there are multiple Ethernet choices, select the one that is connected to the device.

4. Confirm that "Using DHCP" is selected in "Configure IPv4" or "Configuration."

5. Click "Apply" if you have changed the setting, then close the window.

If you haven’t changed the setting, close the window.

Updating the firmware

NOTE

If any warning messages, such as those related to "User Account Control" or "Windows Security,"

appear during the procedure, follow the on-screen instructions to continue.

1. Store the firmware update file "FWUpdate_AIC128-D_vxxx.dnt" in a directory that does not

contain any multi-byte characters.

The letters xxx represent the product version number.

NOTE

The firmware does not operate normally if its path contains any multi-byte characters (including

Japanese characters). If you use a directory name containing any multi-byte characters in your

computer, store the firmware update files in a directory that consists only of ASCII characters (e.g.,

C:\temp).

2. Start up the Dante Firmware Update Manager as follows.

Windows

Select "All programs" or "All apps"→"Audinate"→"Dante Firmware Update Manager"→"Dante

Firmware Update Manager."

Mac

Double-click "Applications"→"Dante Firmware Update Manager."

NOTE

Check in the title bar that the version number is 1.3.0 or higher.

3. Click "Update Dante Firmware."

4. Click "Browse" and select "FWUpdate_AIC128-D_vxxx.dnt" stored on step 1, then click

"Open."

CAUTION

Be sure to ensure compatibility of the update files with Dante Accelerator. If update files other than

Dante Accelerator are applied, the device will become inoperable. In general, do not check the

"Override Device Matching" option. If this option is left unchecked, only devices that support the file

can be selected, preventing update of the device with invalid or wrong files.

5. Click "Next."

NOTE

Dante Firmware Update Manager may be blocked by the Windows Firewall. Select the "Private

Network" checkbox and click "Allow access."

6. Check the Dante Accelerator to update.

7. Click "Start."

The update operation will begin. “Updating” appears in the Status field during updating. “Done” is

displayed once the update is completed.

CAUTION

Updating takes about two to four minutes. During the update operation, do not disconnect the cable.

8. Reboot the computer.

Checking the product version number

1. Restore the connection you changed on the section "Connecting between the computer and

Dante Accelerator."

2. Confirm that the firmware version has been updated by the section "Checking the product

version number."

The firmware update is now complete.

C.S.G., Pro Audio Division

306YJ-A0

Inhaltsverzeichnis

Andere Yamaha Soundkarte Handbücher

Yamaha

Yamaha WF192 Einrichtungshandbuch

Yamaha

Yamaha WF192 Bedienungsanleitung

Yamaha

Yamaha HY128-MD Bedienungsanleitung

Yamaha

Yamaha EtherSound MY16-ES64 Montageanleitung

Yamaha

Yamaha HY256-TL Bedienungsanleitung

Yamaha

Yamaha CobraNet MY16-CII Bedienungsanleitung

Yamaha

Yamaha EtherSound MY16-ES64 Bedienungsanleitung

Yamaha

Yamaha SW1000XG Einrichtungshandbuch

Yamaha

Yamaha SW60XG Bedienungsanleitung

Yamaha

Yamaha SW60XG Bedienungsanleitung

Yamaha

Yamaha HY256-TL Bedienungsanleitung

Yamaha

Yamaha EtherSound MY16-ES64 Bedienungsanleitung

Yamaha

Yamaha AX16-AT Bedienungsanleitung

Yamaha

Yamaha YMF744 Bedienungsanleitung

Yamaha

Yamaha MY16-MD64 Bedienungsanleitung

Yamaha

Yamaha HY144-D-SRC Bedienungsanleitung

Yamaha

Yamaha HY256-TL-SMF Bedienungsanleitung

Yamaha

Yamaha MY8-SDI-D Bedienungsanleitung

Yamaha

Yamaha YMF724 Bedienungsanleitung

Yamaha

Yamaha LMY4-MLF Bedienungsanleitung

Yamaha

Yamaha HY128-MD Bedienungsanleitung

Yamaha

Yamaha AX16-AT Bedienungsanleitung

Yamaha

Yamaha PLG150-DR Bedienungsanleitung

Yamaha

Yamaha mLAN MY16 Bedienungsanleitung

Beliebte Soundkarte Handbücher anderer Marken

PCchips

PCchips CMI8330 Bedienungsanleitung

Creative

Creative Sound BlasterX G5 SB1700 Bedienungsanleitung

IBM

IBM Music Feature Card Bedienungsanleitung

Diamond Multimedia

Diamond Multimedia Xtreme Sound Bedienungsanleitung

Digigram

Digigram VX222v2 Bedienungsanleitung

Pure Speed

Pure Speed DSU6000 Bedienungsanleitung

Philips

Philips Seismic Edge PSC704 Bedienungsanleitung

ADDAC System

ADDAC System ADDAC604 Bedienungsanleitung

Asus

Asus Audio Card Xonar D2 Bedienungsanleitung

Soundwave

Soundwave 7.1 Bedienungsanleitung

Creative

Creative Sound Blaster Pro Bedienungsanleitung

Digigram

Digigram VX222-Mic Bedienungsanleitung

HRT

HRT LineStreamer+ Bedienungsanleitung

ST AEKD-STEREOAVAS Bedienungsanleitung

AuviTran

AuviTran AVY16-ES100 Bedienungsanleitung

Creative

Creative Sound BLASTER Audige Rx SB1550 Bedienungsanleitung

IQaudIO

IQaudIO PI-DAC+ Bedienungsanleitung

VideoLogic

VideoLogic SonicVortex2 Bedienungsanleitung